Rules for replacing a heated towel rail

If you planned to install a new one in place of the old heated towel rail, then you need to properly prepare for such a procedure. In addition, it is very important to strictly follow the step-by-step instructions in order to avoid serious mistakes. And you should also know the basic rules for replacing a heated towel rail.

Before you start replacing your towel dryer yourself, it is very important to take the time to make the necessary preparations. Consider what the right preparation should be.

• First of all, a home craftsman in the first stages should evaluate his knowledge in the plumbing field.
• It is necessary to prepare all the necessary tools through which the work will be carried out. It is recommended that all useful devices be immediately laid out in one accessible place so that at the most crucial moment you do not have to waste time looking for the required tool.
• You will need to understand in detail the technical conditions in which it is planned to replace the heated towel rail.

At the stage of preparation, it is advisable to resolve organizational and legal issues. It is possible that some procedures will need to be coordinated in advance with the relevant government organizations.

• If we are talking about working with individual autonomous heating, then all work is allowed to be carried out without prior approval, because the shutdown of the common systems of an apartment building will not be provided.
• If it is planned to connect to the heat supply in an apartment block building, then in the cold season (for example, in winter during the heating season), certain restrictions will apply. Admission to such work will be allowed only in case of emergency leaks or lack of necessary circulation.
• If it is planned to connect to a hot water supply line in an apartment (privatized), then it is allowed to temporarily turn off the water supply, but this will require an appropriate appeal to the existing management company.

When the preparatory work is completed, it makes sense to start dismantling the old heated towel rail. This is done in a few steps.

• First, you need to outline the locations of future cuts. They must be made exclusively vertically, therefore it is recommended to place the marks using a level.
• With the help of a grinder, you will need to cut off the pipes. This must be done on the way to the dryer. It should not be forgotten that the cut should be as smooth and correct as possible.
• You will need to carefully cut the fasteners, and then take the sawn-down device out of the room so that it does not interfere.
• The frescoes will need to be sharpened. You should make an angle of 45 ° in order to ensure the maximum comfortable entry of the perk.
• After that, the pipe will need to be coated with machine oil. Next, you will need to make a thread with a stick.

At this stage, dismantling works will be successfully completed. If it is planned to dismantle a water heated towel rail of a serial Soviet model, then it will be necessary to build on the way in which it is connected to the highway. The dryer can be fastened by means of a sleeve or by welding.

When the dismantling of the previous device is completed, you can proceed to fixing the new unit. Changing a heated towel rail in a bathroom is not as difficult as it might seem at first glance. The main thing is to act strictly according to the instructions, take your time and use serviceable tools. If everything is done according to the rules, then the risk of making mistakes will be minimized. Let's consider the main features of these events.

• So that with subsequent possible replacements you do not have to contact the housing office and close the hot water riser, it is recommended to install a bypass along with the heated towel rail. This is the name of the bypass pipe with ball valves. Thanks to this component, the water supply to the dryer can be stopped at any time without shutting down the riser.
• It should be remembered that all connecting sections of pipes and fittings must be sealed. For these purposes, it is advisable to use tow, FUM tape, as well as a special thread.
• Next, you need to install the "American" on the eyeliner. This is necessary so that the next time you do not have to re-cut the pipes, but it turns out just to unscrew the dryer and replace it with a new one. This will significantly simplify repair manipulations if the unit breaks down for some reason.
• In the next step, you will need to mark the places on the wall where the fasteners will be located. For these purposes, you will need to connect the assembled and prepared towel dryer to the eyeliners. In this case, you can also use "American".
• Clamping the detachable connection, you need to carefully adjust the position of the device, as well as mark the fixing points on the wall.
• After this stage, it will be possible to finally install the new heated towel rail in its direct place in the bathroom. The device will need to be fixed as securely as possible on the mounts, and then reconnected to the pipes.

If you have planned to change the heated towel rail in the apartment yourself, then you should arm yourself with some useful recommendations on this matter.

• To replace an outdated device with a new one with your own hands, it is possible to use welding to obtain reliable connections. During the operation of electric welding equipment, it is important to observe 2 basic conditions. First, it is necessary to achieve a reliable grip and contact with the metal parts of the crocodile clips. Secondly, it is allowed to connect any electrical devices, especially a welding machine, only to properly grounded power sources.
• As a rule, in new buildings, a bypass is provided initially, so you can carry out a replacement without looking at your neighbors. If there is no bypass, you will have to interact with the management company. You will need to submit an application to obtain permission for installation, and then contact the dispatcher of the housing office to clarify the time of the work. After the completion of the replacement, an employee of the Criminal Code is called to check whether the repair complies with this permit.
• It is advisable to dismantle the old heated towel rail not only when it is severely worn out. Such procedures can also be used if you want to install a more functional appliance in the bathroom with an attractive stylish design.
• The installation of a new heated towel rail on the top floor will be characterized by a simpler piping, since there is no pipe connection to the neighbors from above.Thanks to this, the installation of the device will be much easier and faster.
• The dryer may be installed either in parallel or in series with respect to the riser pipes. If the device breaks the water stream, then for replacement it is imperative to call the plumber from the housing department to the house, and then block the riser.
• When installing a new heated towel rail on your own, it is very important not to forget that the water in its structure should flow exclusively from top to bottom. For this reason, the supply riser must be correctly connected to the upper socket of the unit.
• The current norms and rules for installation do not allow the installation of any fittings on the bypass. It is imperative to remember this prohibition when installing the device with your own hands.
• You can not arbitrarily transfer the heated towel rail to inadmissibly long distances. Self-relocation of the riser is also strictly prohibited.
• If you decide on your own to replace the old device with a new one, it is strongly recommended to use only properly working tools for this. If the same grinder does not work correctly, then high-quality work will simply fail.
• If at the preparatory stage the owner realized that his knowledge and skills would not be enough for the error-free installation of a new coil, then it makes sense to turn to more experienced craftsmen. Of course, this will entail certain expenses, but important systems in the home will not receive any damage.

How to replace a heated towel rail, see the next video.