Taps for heated towel rails

Modern plumbing should not only be beautiful, but also work like a clock. The heated towel rail is an element of the general heating system, therefore it must be installed correctly. A high-quality heating system must have shut-off valves in order to regulate heat transfer, if necessary, or shut off the system if an emergency occurs. All structural elements must be sufficiently reliable and strong. The article will focus on taps for heated towel rails.

These designs differ in several ways.

1. Material. The faucets can be made of various metals, as well as have a decorative chrome finish. For example, bathroom products can be made of bronze, stainless steel, brass. The type of metal is of particular importance, since the reliability of the structure, its resistance to high temperatures and the overall service life depend on this parameter. The best materials for heated towel racks are stainless steel and brass.

2. Purpose. Regulating taps can have a shut-off design, there are also options called Mayevsky taps. The latest models differ in design features and are designed to bleed air from the heating system.

3. The structure consists of valves and taps. The taps have a special lock, which is responsible for the redistribution of the water flow. Valves are necessary to cut off the flow of water in time, they are also necessary to regulate this flow.

Depending on the location of the nozzles, the taps for heated towel rails are divided into direct-flow and angular. There is practically no difference between these options in terms of technical characteristics. They differ only in the form of connection to the system.

The cross-section of the passage of structures is marked in inches. The lower this indicator, the higher the level of hydraulic resistance. Therefore, experts say that you should not connect a tap if its dimensions are smaller than the main hole.

If you install a three-way tap, then the water can be regulated both through the bypass and through the heated towel rail (if the water flow increases in the heating system, then the flow for the bypass will become less intense).

The shape of the crane structures or valves can be different. The assortment includes options in the shape of a square, cylinder or rectangle. There are also more complex models. Therefore, faucets for heated towel rails, depending on the shape and other parameters, are suitable for any bathroom.

Ball locks are quite common because they are very easy to install. Usually, two such designs are needed for heated towel rails. It is best to choose models made of copper or brass with a special chrome finish. Such locks easily withstand the flow of hot water and the pressure inside the structure.

The ball joint consists of the following set of parts:

• the body itself;

• Cork;

• handle;

• sealing rings - 1 inch;

• spindle.

The ball valve is designed to shut off the heating channel, as well as to adjust the temperature of the water supply. For this, the structure is equipped with a special handle, which can be turned to control the water flow and its temperature. Such a crane can be hidden in a box or a special niche.

The technical characteristics of this type indicate that the product is perfect for working in an aquatic environment. Jib valves of this configuration are best suited for towel rails on the bottom. It is also worth stopping the choice on products made of copper or brass. A tap is mounted at the top of the heated towel rail.

The Mayevsky shutter consists of the following elements:

• shut-off valve;

• valve;

• frame.

The cranes are unpretentious in operation. When too much air accumulates in the design of the dryer, it is necessary to remove all things that may get splashed with boiling water. Under the shutter, you must substitute a container into which the water will be drained.

The thread of such cranes is right-handed, so it is easier to work with such structures. To release the air, you need to open the valve one turn and wait for the air to come off. Air movement will be heard during the procedure. Then you need to wait until water begins to drip from the tap. This procedure will need to be repeated from time to time. It is especially relevant if the heat is unevenly distributed. The procedure can be carried out on a monthly basis, since the accumulated air must be released from time to time.

Mayevsky's device is found in different variations: from classic models with a screwdriver valve to more complex designs with a comfortable handle. However, the principle of operation of such cranes is no different.

Particular attention should be paid to the material from which the crane is made. It is best to choose models with a stainless steel finish. The valve must be made of durable and heat-resistant material.

Valves made of chrome-plated metal, copper and brass are considered affordable and of high quality. The structures themselves most often have a combined configuration: the inner sections are made of durable material, and the outer ones are not so strong, but provide a presentable appearance.

In the assortment you can find high quality and durable valves in any price segment. It is better not to buy structures with polypropylene elements. Even the toughest plastic will fail faster than metal taps.

The range of sanitary ware includes a wide selection of closures for heated towel rails of all configurations. Experts point out the nuances that need to be considered when choosing.

• Shape and size - an extremely important indicator, since the model must not only fulfill its direct functions, but also be beautiful.

• Connection type. The purchased device must be suitable for the operation of the entire system. Therefore, before going to a plumbing store, you need to measure the pipes, as well as the space in the corners and from the wall.

• Installation method. We are talking about the differences in installation for different types of communication (for central heating or for autonomous). Installation of cranes is not allowed if a bypass has not been organized before. This is true for rooms with central heating, since this factor can affect heat transfer in neighboring apartments.

• Pay attention to design. If the heated towel rail is white, then a black faucet will be inappropriate.

You can install such a structure yourself without special experience and skills.

First you need to check all the components. If some special devices did not come with a heated towel rail, then you will have to buy the necessary ones yourself. Additional devices should be inspected prior to purchasing. The shut-off valve must be suitable for the dimensions of the system.

When a new heating system is installed, the arrangement of the elements and the joints must be carefully checked. You will need masking tape for the marks.

For a finishing connection, it is important that all the marks match. To do this, you need to put a crane, put gaskets, windings. Then all the nuts are tightened. When installing a new system, the seal must be changed.

To install the Mayevsky crane, you need to follow these steps:

1. Air accumulates at the very top of the structure, therefore, it is better to remove it in these areas. Concealed installation on the side surfaces of the structure is possible.

2. The shutter must be cut into the upper edge of the heating device. If work is carried out on a ladder-shaped heated towel rail, then there is usually a special plug on it. If no plug is provided, you will have to drill a small hole and cut the threads.

To replace an old appliance, you first need to drain the water. It is recommended to ensure that the system is not pressurized. All devices that are connected to the common system must be turned off. Then you need to open the tap, which is responsible for supplying hot water, and bleed off excess air.

If we are talking about central heating, then turn off the water by turning the common shutter. Most often, the common tap is located in the basement or in the basement of an apartment building. If you turn off the common tap, the pressure in the system will decrease and you can start dismantling.

When sealing, it is better to use a special tape made of fluoroplastic material (FUM). After carrying out the work, you need to check the performance of the tap by connecting it to the riser and opening the water.