"Snail" for watering the garden

Many summer residents are faced with the problem of watering their gardens. Moistening a large area with plantings every day will take too much time and effort, so the best option would be to install special irrigation devices on the site that will automatically spray water. In this case, you should choose a suitable nozzle for them. The most popular option is the snail. You should be aware of the features of such attachments and how they are arranged.

The "snail" is the simplest mechanism that allows you to quickly irrigate large areas with relatively low water pressure. When using this model, the water jets will first begin to swirl, and then a finely dispersed liquid stream is released from the central part.

This sprinkler for irrigation systems looks like an oval-shaped container, equipped with a small plastic tube, the product has a hole in the middle. Thus, with the help of a hose, a liquid is supplied to such a nozzle through a branch pipe, after which streams of water are poured out in different directions.

The snail sprinkler can be of various types. Let's highlight the most common models.

• Static models. This version is available without rotating parts. The design allows you to water large areas around you. The model can be either portable or set in the soil.

• Oscillating atomizers. These varieties look like tubes mounted on a small tripod. They will be the best option for watering rectangular summer cottages. These nozzles have a long range of water spraying. These elements belong to the high price category, most often such models have various types of humidification regulation.

• Rotary sprinklers. Such means for watering the garden are outwardly similar to static samples, but at the same time they are equipped with a rotating element. Their maximum range is about 30 m. Most often they are buried in the ground. Rotary varieties will be the best option for irrigating areas with complex geometric shapes. Such devices contribute to the most efficient use of water resources.

• Impulse models. Such devices for irrigating gardens are in many ways similar in structure to the previous version, but at the same time they release liquid in the form of a jet at equal time intervals. This is achieved thanks to a special ratchet mechanism. Impulse irrigation devices are equipped with only one nozzle. Often, such models can be independently configured to irrigate the entire area around or only a certain part of it. But it should be remembered that these samples require a significant water pressure and at the same time they cannot boast of high performance.

In order for the "snail" to be able to perform all its functions, you first need to install it correctly. To do this, the hose must be secured to the pipe as tightly as possible so that the liquid can be easily fed into the structure and sprayed. If these elements are poorly secured, then the water will be poorly supplied, and over time, the sprinkler may completely disconnect.

Installation can be done by anyone with their own hands without the use of tools.Many models have a threaded part, which also simplifies the fixing process. Different models are available for specific hose diameters, with 3/4 '' hose being common.

Before installing such a device in the garden, decide where it is best to do it. Sometimes it is positioned in such a way that the device can moisten the largest areas with seedlings in order to save water resources. In this case, it should be done so that the minimum amount of liquid falls on the paths, because otherwise weeds will grow much stronger on them over time.

For more information about the "snail" for watering the garden, see the video below.