Do-it-yourself garden watering systems

Watering is an integral part of crop care. How to perform the procedure, everyone decides for himself. In this article, we will consider various methods of watering.

Watering the garden can be done with a regular watering can. This method is optimal for performing the procedure in a greenhouse or irrigating beds, but it is very labor-intensive. The watering procedure in the country can be made much more pleasant with the help of the simplest devices. Let's consider them in more detail.

Typically, rubber products or PVC hoses are used for irrigation, and are standard half or 3/4 inch sizes. The difference between the latter option lies in its lightness and reliability. Products perfectly retain their shape under the rays of the sun, do not fail at extreme subzero temperatures. True, in the latter case, they become not as flexible as before.

Rubber hoses are also characterized by their durability. Their disadvantage lies in their large mass, which leads to an increase in the load during irrigation. As a result, a person gets tired quickly, as he has to carry a large amount of water.

The popularity of reinforced hoses is growing. They have a braid resembling a spiral or mesh located between the layers. Such a device prevents creases, bends.

Oozing models are in demand among gardeners, with the help of which they equip drip or underground irrigation. In the manufacture of such products, a porous material is used that can pass water.

The perforated product differs in the presence of a large number of holes. Water comes through them. This is ensured by a specially created pressure in the system. A perforated hose is used for carrying and installing the structure of the rain system.

The purpose of the sprayers is to evenly distribute water over the territory of the summer cottage. There are several types of special products.

1. The principle of operation of a fan is to irrigate a fixed area with the ability to change the distance with a jet.
2. Umbrella resemble an umbrella when spraying jets.
3. Products of the rotary type are distinguished by their economy. When using the attachments, the spray angle can be adjusted.
4. Directional irrigation is provided when using the impulse option. It makes it possible to humidify an area of ​​40 square meters.

The use of any irrigation system is not complete without a pump. They are presented in large quantities on the market. Use each pump and filter item as appropriate.

1. The popularity of the superficial is growing. They suck in water from a depth of 8-9 meters. With their help, liquid is pumped from containers of different sizes.The designs are easy to carry and easy to use.
2. It is possible to use submersible. They raise water from great depths.
3. To water the area from a small container, it is necessary to use barrel models.
4. Containers are filled with drainage structures. However, they cannot water the ridges.

To equip a do-it-yourself irrigation system, a humidity sensor is often used. It is used in the manufacture of an automatic structure. The sensor helps to understand whether or not it is worth watering the area at a given time.

The use of a variety of reinforcing products is great. To get the job done, you need to purchase fittings, fittings, clamps, plugs and some other accessories.

To make it easier to transport various garden tools and equipment, professionals advise buying a cart.

The drip irrigation device provides plants with the right amount of water. The portions are small. With the correct method, the roots of plants and the soil around them are moistened. Distribution of water establishes an optimal regime for feeding crops. They do not dry out or rot, which often happens during overflow.

Not a single drop of liquid is lost if you carry out drip irrigation yourself correctly. To accomplish the task, you should only select the necessary tools and materials. After that, a homemade design is not difficult to make.

To mount the system, you need to take several pipes or plastic bottles. The gardener himself makes a choice of what is easier for him to use. If the area is small, the use of bottles is suggested. For a large area, it is better to take pipes. Let's consider each option in more detail.

For arranging the bottle variety, take a one and a half liter container. It is hung over the beds with the throat down or buried in the soil. Previously, several small holes are made in the lid, and water that has settled for several days is poured into the container.

Holes can be made with a heated needle. Typically, one bottle provides nutrition to the culture for 5 days. The bottom in such a container is cut off, so that you can easily replenish the liquid supply.

During preparation, a water reservoir is buried in the soil, several pipes are laid, connecting them with adapters and leading to the main source of moisture. At the next stage, small pipes are laid with holes made in their surface.

Special branches are made from pipes to each plant. Usually, the remains of droppers are used for these purposes. They allow crops to be hydrated while providing nourishment.

If you do not want to face a blockage, you should regularly clean the structure. For this, a filter is installed at the entrance to the tank. It separates water from dirt and sand. An absolutely pure liquid is supplied to the crops.

You can organize an underground irrigation system with your own hands. Several years ago, similar products were used to irrigate large areas. Currently, an underground watering system is used in the garden and at the summer cottage.

The method makes it possible to facilitate the delivery of water to the root system using tubes in which special holes are made. When installing such a structure, there is no crust on the surface. This will avoid loosening the soil and removing weeds.

It is possible to assemble a convenient device without special expenses.

• To do this, take a sufficient number of small pipes with a 3-4-centimeter diameter. Small holes are made in the surface of the products.
• Dig small holes to a depth of 50-90 centimeters. Then lay a polyethylene film on the bottom of the tape. This measure helps to prevent moisture loss.
• Pipes with holes made in the surface are laid on top of the polyethylene tapes. Then they are brought to a container from which water will be supplied. After the preparatory work, the pipes are buried with a sufficient amount of earth.

It is customary to call rainwater an automatic method of irrigation. It is built to simulate natural precipitation. When using this method, the root soil and the top layer are irrigated.

With the help of sprinkling, crops are naturally cleaned of dust and pollution. This allows them to grow and yield better. Usually such systems are arranged to water the lawn.

To equip a rain system, they dig on the territory of a special trench. Then, pipes are laid with the installation of sprinklers and the connection of the structure to the container. An uninterrupted water supply is carried out using a specially programmed controller.

The latter option is difficult enough for the independent implementation of the process. It is better to entrust the work to experienced craftsmen.

Watering your garden by hand is very difficult. This option can be used in a small area. For large areas, it is better to mount a special irrigation system. This will ensure an uninterrupted supply of moisture to the plants and increase the yield.

You can learn how to do drip irrigation of a garden with your own hands from the video below.