How to choose a plastic slide for the slide?

For those parents who are fortunate enough to equip their own children's corner for their child, it is very important to approach its construction and choose the constituent structures wisely. And the quality of materials in this matter is far from last. The "heart" of the children's corner has always been a slide. What to guide you when choosing a plastic slope for a children's slide is described in this article.

The slope of a children's slide is an elongated surface of small thickness, one part of which is located at the upper point of the slide support, and the lower one - on the ground surface. Installed on a frame specially equipped for it.

Such designs can be of different lengths and are made of different materials. Models of any color can be purchased or ordered.

The most common material of manufacture is plastic. Modern processing and production technologies have made it quite durable against mechanical stress and resistant to temperature changes. Best of all, plastic models are combined with a wooden frame.

Materials derived from plastics are also worth mentioning right away. The first of these is fiberglass. It has a very beautiful appearance, but it is distinguished by intolerance to low temperatures - it can freeze and become fragile in this state. During production, it is very easy to take any given shape, which makes this material popular with manufacturers.

The second material of manufacture is fiberglass. This is the same as fiberglass, with the only difference that the fibers of the material are impregnated with resin. Fiberglass models are durable and flexible. The material is not affected by temperature drops and changes in humidity levels. Fiberglass slopes have the same strength as the same steel models, but they are several times lighter. Such models hardly sag over time.

Metal models are still available. They are strong and durable, but in the conditions of a sharply continental climate, they overheat in summer and become simply icy in winter.

Wooden stingrays are also produced, but in small quantities. Over time, this material is easily destructible due to the influence of temperature and moisture. Such slopes cannot be made in any other shape, except as straight, otherwise such a structure may collapse. But such slides have one advantage - they are environmentally friendly, do not have a strongly pronounced odor, do not cause various reactions in the child when in contact with the skin, do not overcool and do not overheat.

Obviously, the slide for children should be made of plastic. They are available in any color and the most interesting shapes, even in the form of a fairytale tower or the Eiffel Tower in miniature. And stingrays can be found with the most bizarre curves.

The first thing you need to pay attention to is the workmanship. The outer surface of the slope should be flat, without cracks and protrusions. Particular attention should be paid to the seams - they should be invisible and well worn. The surface of the slope must have a high degree of slip. The base of the ramp is equipped with a safety speed damper to prevent injury.

The second selection parameter is height. First of all, the choice of the height of the slope should depend on the age of the child. For young children, it is better to choose a slide no more than 3 m high, and for children from 4 years old, installations from 4 m high are purchased.The recommended installation height in meters is indicated by the manufacturer.

Another important point is the quality and durability of the component parts. In particular, the fasteners for installation must be flat, tightly seated in the nests, and safe from injury.

It is impossible to save on the safety of children, you need to stop your choice, first of all, on constructions of good quality. In addition, the bright slide will delight even adults with its appearance. Plastic slides are both a safe and not very expensive option.

For information on how to make a slide for a playground with your own hands, see the next video.