How to make a swing "Nest" with your own hands?

The swing is one of the favorite attractions for children. In principle, this is not a very complicated design that you can do with your own hands. "Nest" is a suspended model that has some advantages over other structures. It is a good option for installation in a summer cottage or in the yard of your own house.

The "Nest" design is quite popular, it is also called "Basket" and "Cobweb". The main feature of the product is its round seat. Thanks to this shape, the swing has additional advantages:

• the model can fit several children at once, if you choose a sufficiently large diameter of the seat;
• due to the method of suspension, the structure can swing in different directions, bounce and rotate;
• if you choose the oval version of the seat, the attraction can also be used as a hammock for relaxing adults and children.

On the other hand, in this modification, the suspension ropes have a significant load, therefore strong and safe ropes must be used. If we take the standard factory model, then it has the following characteristics:

• the seat mesh in it is created using machine knitting, therefore it easily withstands constant stretching;
• you can hang it at a height of 2-2.5 m above the ground;
• the ropes are usually made of polypropylene, they are strong and safe, have a thickness of at least 1 cm;
• fasteners and rings are made of galvanized steel.

Ready-made structures are made taking into account the effects of ultraviolet radiation and high humidity, therefore, they are immune to negative external conditions. All these points must be taken into account if you decide to make a swing "Nest" with your own hands. This is beneficial because the cost of products manufactured in production is quite high.

To independently make a practical, convenient and reliable model, you will need instructions and knowledge of the device of this attraction. You should also think about the materials from which the main elements will be made.

• The swing is supported by a frame made of metal profiles; it is also made of wooden beams.
• The base of the seat can be made of a hoop, plastic or steel, this central part of the structure must be well thought out both in shape and in the raw materials. There are usually no questions with the net - it can be woven from a climbing rope, it will represent the central part.
• The basket, as a rule, is complemented by a round pillow with high-quality artificial filling and a nylon cover, which can always be easily removed for washing.

It makes sense to take the following materials for making a home swing:

• safety cord or tow rope (diameter 5-6 mm) for binding the seat;
• synthetic fabric for tents, felt and foam rubber, since the outer part of the suspension needs a multi-colored or at least bright material that children will like;
• a steel water pipe (about 4 m) is suitable as a support;
• two steel (gymnastic) hoops with a diameter of 90 cm to create a frame.

Arrangement of a children's swing should begin with the manufacture of a seat. First, the steel frame of the seat is made, for this, two hoops are taken, they are connected using loops or clamps.If it is assumed that adults will also use the structure, it is better to use a steel pipe with a cross section of up to 15 mm and a length of 150 cm, which is bent on special pipe bending equipment and welded.

The net for the Nest swing can be woven in any way, if only the knitting is strong enough. To do this, use such weaving techniques as tatting, macrame or patchwork. However, it should be borne in mind that the use of openwork fabric or too thin cords is suitable for the use of the structure by one child. You should also pay attention to the fact that the mesh does not sag - for this, the cords are pulled extremely tightly. The created seat fabric must be securely attached to the frame with knots.

When the central part of the structure is ready, you can proceed to making the frame. It makes sense to use the traditional version of a profiled pipe or timber (100x100). Procedure:

• prepare two support in the form of the letter "A";
• for a horizontal crossbeam, a steel pipe is mounted to them, while the height of the swing should be the same as the distance between the supports;
• ropes and slings are fixed in pairs on the crossbar, polypropylene cables are preferable, but chains previously wrapped with dense material can also be used for suspension;
• so that the cable does not undergo abrasion, a polyester gasket is made under it;
• four carabiners are required for fastening the basket.

After installation, it is necessary to test the structure for strength - this can be done by laying bars with a total weight of up to 120-150 kg on the frame. At this stage, the degree of tension on the ropes is usually checked and the distance of the seat from the ground is optimally adjusted. Already after checking, before finally hanging the basket, the metal frame should be pasted over with foam rubber, and then with special expanded polypropylene, having performed thermal insulation of the steel pipe.

The outer edge is carefully braided with a turnip, it should be applied evenly, and on top it should be supplemented with a polyester cover. Self-production of such a model of a swing will not take much time and will require a minimum investment of money. The main thing is to follow the instructions so that the structure is strong, durable and safe.

How to make a swing "Nest" with your own hands, see below.