How to Choose a Rail Tile Cutter?

Knowing how to choose a rail tile cutter, you can choose this tool for yourself individually, taking into account your needs. There are monorail and manual types of tile cutters, so it is necessary to find out how the monorail-based and professional models differ.

The concept of a rail tile cutter is, rather, of an everyday nature. It is more professional to speak of a device with an upper engine arrangement, but in practice this term has been simplified. It is generally accepted that this technique belongs to the professional class.

It is characterized by a high cutting accuracy and an insignificant probability of rejection if the work is carried out carefully. The term monorail is quite unambiguous - only 1 guide line is used.

The most important difference between devices is the type of drive. Yes, they are all professional tools. But at the same time, purely mechanical devices are singled out in a special category. They are typically relatively small in size. A roller, which is moved manually, helps to cut the tiles. Structurally, such a model is made in the format of a rubberized bed. A rail mechanism from a pair of parallel tubes is mounted on it. But there is also a solution on a monorail in the version of an I-beam. It is also important to consider the length of the cut. If it is 600 mm, then the tool is usually reinforced, which makes it possible to increase the accuracy of cutting the tiles.

It is not often possible to come across manual devices for processing tiles with a cutting length of 1200 or even 900 mm. There is little point in using this technique. At home, it is quite possible to do with a device with a cutting line of up to 600 mm.

When choosing tile cutters, it is very important:

• carefully study the technical documentation;
• read reviews;
• find out how a particular device is suitable purely for their purposes.

For home use, when only straight cuts are made, and you also have to work with tiles no larger than 600x600 mm, a simple mechanical model is quite enough. Such devices work fairly accurately. The tolerable degree of load is not too important, so there is no particular point in paying attention to this indicator. But at the same time, the frequent loss of cutting characteristics is unlikely to please users. It is necessary to give preference to tools that allow you to replace the cutting part without changing the tool.

It is useful to pay attention to the integral rolling bearings. They run more smoothly and are not subject to jerks. Cutters with such a filling work better and more accurately. But sometimes it becomes necessary to increase the functionality of the product. And then you need to choose modifications of tile cutters with ballerinas who confidently drill holes with a cross section of 3 to 8 cm.

This solution is optimal for tiles to bypass specific pipes for various purposes. If the depth of the cut is greater than 10 mm, then an electrical device must be selected. Again, it's not worth chasing record indicators - an economy-class device is enough. It usually has a capacity of up to 0.6 kilowatts and is equipped with a 180 mm disc.