All about sawmills "Taiga"

Wood is an important building component that has been used by humans for a long time. Each era has its own characteristics of working with this material and options for its processing. Today, for this, sawmills are often used, which have proven themselves from the best side. Of the domestic manufacturers of this type of equipment, one can single out firm "Taiga".

Sawmills "Taiga", being a popular technique in the market of forestry equipment, have a number of features that are useful to know.

• Simplicity... A domestic manufacturer creates models that do not have a large number of technological functions. The emphasis is on ease of use, which is confirmed by the model range and its copies. If you want to equip the sawmill with additional devices, then they can be purchased directly from the manufacturer with detailed instructions for installation and technology of use.
• Reliability... The Taiga Group of Companies has been on the market for about 30 years, during which it has studied the forestry machinery market throughout the country. This allowed the company to gain the trust of customers and improve its products. At the moment, the Taiga sawmills can be called the product of many years of experience, which has full certification confirming the quality of the equipment.
• User qualification requirements... In order to work at the Taiga sawmill, there is no need for any professional experience. You can use this technique for your own business, where it is not about industrial volumes of harvesting, but about the local supply of wood.
• Availability... If we consider logging equipment from the point of view of the domestic market, then in terms of cost and self-sufficiency, the Taiga sawmills can compete even with more expensive counterparts. At the same time, there are no problems with the purchase, since in each federal district of Russia there are representative offices where you can purchase the necessary model.
• Feedback. The manufacturer makes discounts for bulk buyers, and also has a wide dealer network and service centers, so each buyer can maintain a high level of feedback with the company.
• Range... There are several basic models that differ not only in their class, for example, "Economy", "Premium" or "Standard", but also in the fuel system.

"Taiga T-2" is a standard electric model that is suitable for both private use and for your own sawmill business. This model is designed for cutting material with a diameter of up to 90 cm into smaller pieces - bars, boards and much more. The energy consumption level is 7.5 kW, which is the optimal indicator for a technique of such efficiency.

Small dimensions and the ability to disassemble the structure allows you to transport this sawmill by means of small trucks... At the request of the customer, this unit can be equipped with a reinforced rail track, which will increase productivity. There is also an electronic ruler among the modifications, which will make the workflow more accurate when you are dealing with certain indicators and size standards.

These capabilities allow you to purchase the original sawmill for a small amount and improve it over time in case your business is profitable quickly.

As for the characteristics, then it is possible to note the length of the used log at 6500 mm, voltage at 350 V, wheel diameter 520 mm... The carriage is lowered due to mechanical action, the movement of the sawmill in the forward and backward direction is done manually. The dimensions of the machine are 930x1700x200 mm according to the DVSH. The weight is 550 kg, the productivity is 8 cubic meters. meters / shift. In addition to this standard variation of the sawmill, there are T-2M Benefit and T-2B Economy.

Taiga "T-2M Benefit" is an electric drive model that differs from its original version in improved efficiency. It is made possible by a robust design made especially for professional sawmill operators. Experience in using such equipment will allow you to have an increased power of the equipment in the middle price segment of the sawmill.

Normal energy consumption and optimal cost make this unit one of the most preferred for those enterprises that have good specialists. This is a case where craftsmanship can bring more value at the expense of equipment. Dimensions do not differ from the previous model, therefore it is also possible to disassemble and transport on small transport vehicles such as "Gazelle".

When installing an electronic ruler, the manufacturing capabilities increase many times over, and the quality of material processing will already depend on the skill of the sawmill operator. It should be said about the complete set, which can be expanded by installing modifications. Among them, one can distinguish hooks, adjusting supports, as well as saws and a sharpening machine with all consumable elements.

The diameter of the sawing log is 900 mm, the length of the processed material can be up to 6500 mm, the motor is installed with a power of 11 kW, voltage of 380 V. The diameter of the 520 mm wheels and the increased productivity make this unit more preferable than the standard unit if you are seriously considering a quick payback. The dimensions are 8000x80x1060 mm for DVSh, the dimensions of the band saws are 4026 mm in length and 32-35 mm in width.

"Taiga T-3 Premium" is the most popular model from this manufacturer, which for a long time has proven itself from the best side in the entire domestic market... The main advantage This technique can be called versatility, because the operation is simple for both a beginner and a professional. A wide range of possibilities allows you to have high efficiency, depending on the skill of the sawmill. Of course, such a unit requires considerable energy consumption, which is 11 kW, which is higher than that of cheaper models.

Despite its versatility and increased power, the dimensions and weight remain at the same level as previous models. The cost is fully justified by the characteristics that are important to clarify. The diameter of the sawing log is 900 mm, the length of the material used is up to 6500 mm, the voltage is 380 V, the diameter of the wheels is 600 mm. The lifting is of a mechanical type, band saws are used with an increased length of 4290 mm and a width of 38-40 mm. The productivity is 10-12 cubic meters. meters per shift.

First of all, it is important to determine the amount of work to which the equipment will be subject. As a rule, T-1 and T-2 of standard or economical types are used in small industries, where the load exerted is quite sufficient for the sawmills. In this case, it is worth considering the resource of the equipment, which is higher for more expensive models. Do not forget that the units can be gradually improved by installing modifications.

If you want to expand your own procurement farm, then it is better to use generic models... They may work depending on how much material you have. Thus, you will not need to maintain equipment, the power of which will be used only partially.

The sales policy of this company is directed towards the buyer, therefore the cost of each model allows you to have a quick payback... There is no significant difference in price, as is the case with other manufacturers, so rely on how you expect to operate the equipment. Do not forget also that the assortment is subdivided into units with electric and petrol drives.

Installation of a circular sawmill is a complex of actions that must be performed in a strictly defined sequence. The basis of the technique is made up of supports, which are fixed with nuts and installed on the surface by means of fasteners. Then it is necessary to assemble the roller tables, feeding and leading parts of the installation. This is followed by the installation of the electronics. The role of adjustment along the planes is very important so that the sawn log moves most accurately in a given direction. Installation and the entire process of its implementation are described in detail in the instruction manual.

As for the use of sawmills, it is worth marking safety engineering during work. Because of the high speed saws in the design, be careful when in close contact with the cutting material. If your technique is equipped with an electric motor, then monitor its power supply. Inspect the sawmill for any defects before each work session.