Everything you need to know about Kedr sawmills

The modern domestic market of logging equipment is represented by a large number of companies that are ready to offer their products to the consumer. A variety of models are available, equipped with a variety of features and capabilities. One of these manufacturers is the Kedr company, which will be discussed.

Consider why the presented products are so attractive.

• Wide range of models. You can choose the equipment at your discretion and preferences, since this manufacturer has copies of various directions and modifications that make each unit more versatile. Any model is presented in several variations, which makes the choice easier.
• Low cost. In comparison with other units of domestic production, the Kedr sawmills meet the price / quality ratio, so you can quickly recoup the money invested in the equipment.
• Mobility. Most of the sawmills of this company have the optimal dimensions and weight, so placing them even on a small area will not present any problems. It is worth noting that with different power and configuration, the models are still designed in such a way as to take up little space.

Now, for a closer acquaintance with the products of the "Kedr" company, it is worth reviewing the most popular models that have made the manufacturer well-known in its field.

"Kedr-M" is a small band sawmill equipped with everything you need to do your job efficiently. Speaking about the features of this unit, it is worth noting its small size and performance. Being the “junior” model of the first analogue “Kedr”, this technique is recommended for those who are just starting their way in the logging business. The length of the processed material is from 0.5 to 6.5 meters as standard, and with the purchase of an additional section for the rail track, logs up to 9.05 meters can be processed.

If you are going to make beams and boards, then their maximum thickness should not exceed 270 mm. The width of the processed logs can reach 710 mm, for one full working shift the productivity of this unit will allow processing from 5 to 10 cubic meters. m. forest. The diameter of the saw pulleys is 510 mm and the speed of the saw band is about 30 m / s, thanks to which this technique has become known among the buyers. An electric motor with a power of 7.5 kW is installed, for raising and lowering the saw mechanism only manual adjustment is possible.

Voltage 380 V, machine dimensions - 7650x1600x400 mm. The weight is 600 kg, which is 100 less than that of the "older" model, while the power and performance are at the same level. The key difference is only the width of the material to be cut.

"Kedr-2" is a disk model that has become popular due to its performance, high power and optimal cost. With such advantages, this machine can pay for itself in a fairly short time. The length of the processed logs is from 0.5 to 6.5 meters, and with the installation of an additional section for the rail track, this figure will increase by another 2.55 meters. The maximum diameter of the material used does not exceed 930 mm, while for a board or timber it is about 270 mm. For a long 12-hour work shift, you can process from 10 to 18 cubic meters. m. of wood.

As for the components of the sawmill and their parameters, the diameter of the saw pulleys is 510 mm, and the speed of the saw band is about 30 m / s. To drive the saw, an 11 kW electric motor is installed, there is also a motor for lifting and lowering the saw mechanism with a power of 0.55 kW. Saw carriage feed is manual, voltage is 380 V, weight - 700 kg. Dimensions - 7650x1800x1600 mm in accordance with DShV. The recommended length for the tape is 4026 mm, and the width is from 32 to 40 mm.

This unit is one of the best from this manufacturer in terms of the ratio of its performance, efficiency and price.... Recommended for purchase in cases of expansion of the enterprise and increase in production capacity.

"Kedr-5" is the most powerful and efficient equipment from the presented company. The best performance combined with a wide range of options and capabilities make this model preferred in order to make it a mainstay of a large enterprise. The key feature and difference from other units is the ability to start the saw at an inclination of 15 degrees. For a 12-hour work shift, you can process from 20 to 25 cubic meters. m. of wood.

The saw length is 4928 mm, and the width is 32-40 mm. In this case, the diameter of the saw pulleys is 600 mm, the speed of the saw band is up to 30 m / s. The maximum width of the processed logs is up to 1150 mm, there is an electric raising and lowering of the saw carriage. Dimensions - 8000x2200x1720 mm, machine weight - 730 kg. An electric motor with a maximum power of 15 kW is installed, with the possibility of installing additional equipment.

Operation is an important part of the workflow. For proper use of the Kedr sawmills, first of all, check the state of the equipment and check it before each start. Since the electric motor is installed, remember to keep the power cord secure and to keep moisture or liquid away from the electronics.

The package includes saws, therefore special attention is required in relation to them.