Making a sandbox with a bench cover

For a small child, outdoor activities are indispensable: that is why every parent strives to make his child's time interesting and fun. For summer games in the courtyard of a private house, a hand-made sandbox is ideal: after all, as you know, what is done with love serves best. But if you want to make a sandbox for children, many questions arise about the structure. One of them: what kind and form should it be made so that it is fun to play, but at the same time, so that the design is practical?

One of the best options is a sandbox with a bench cover.

This design has a number of advantages:

• the doors fold back easily, so not only an adult can open and close them;
• the cover turns into a backrest in an instant, which creates additional comfort for the child;
• if the children have enough space in the sandbox, then they can use one half of the lid as a play stand;
• thanks to the bench, you can always put aside toys or things that the child does not use, and at the same time not lose them.
• if desired, the product can always be easily repaired or improved.

It is very important for the child's health where the sandbox will be located. Children may refuse to spend time in it only because the conditions of its location will be uncomfortable for them. To choose a good site for installing a sandbox, you need to take into account several important conditions:

• the place should be blown through with a slight breeze, but not a draft that threatens the health of the child;
• it is good if the sand can warm up: from morning to noon, it is advisable to open the lid, which will free it from condensation and warm it up to a suitable temperature;
• it is better to put the sandbox where there are no tall trees and thickets, which can provoke the appearance of dangerous insects near the child;
• the place for games must be equipped as far as possible from the road and prying eyes, but so that it can always be viewed by parents.

If this is not possible, then it is better to take care of installing a canopy.

The best choice is a sandbox made of wood: this material is not only very durable, but also environmentally friendly. but do not use wood material that contains formaldehyde, as well as hazardous chemicals after processing. The building materials market offers a large selection of wood that is resistant to decay, harmful insects, natural and atmospheric phenomena, but at the same time safe for the health of the child.

To build a wooden sandbox, you will also need mounting hardware: packing of self-tapping screws - long to ensure reliable fastening, but not so much that their edges sticking out through the boards injure the child, as well as metal hinges to create a transforming structure, in the amount of 8-12 pieces.

Their exact number depends on individual preferences, but if we talk about standard values, then you should count on eight boards for the sides, twelve for making the top cover, four bars that strengthen the corners when building the box and ten bars for fastening the boards during construction. backs and seats. Materials that function as benches must be carefully planed and processed.

A list of tools that are necessary for the implementation of the conceived project will come in handy: a circular saw, a screwdriver, a drill, a square (will help to ensure the reliability of the structure, since the curved corners of the sandbox will make it wobbly), a shovel, a construction stapler for attaching a coating that protects against plants, as well as an emery sanding paper.

It is easy to make a transforming bench, even if a person has no experience. It is important to prepare all the tools and materials, create a drawing and get started.

First of all, it is worth making a drawing of the future folding sandbox. After reading the step-by-step instructions, it is worthwhile to draw up a work scheme, taking into account the dimensions that will be used during construction.

Prepare wooden blocks and boards of the required length. All received elements must be coated with a primer. It is worth noting that for the standard design, three pairs of boards for the lid with benches will be used, not counting the boards for making the box.

Assemble a sandbox box with a roof and benches. To do this, it is necessary to connect the boards and bars located in the corners of the structure with screws, using a square: otherwise, you can get a crooked, unreliable base. It is necessary to check whether the heads of the fasteners entered the tree well so that in the future it would not be possible to injure your hands on them.

It is necessary to make high-quality grinding of the surface: this will protect the playing children from splinters. The same should be done with the transformer sandbox benches. The resulting structure should be treated with a wood preservative, which will prolong the life of the product, protect it from water, fungus and harmful insects.

After completing work on the box, you need to outline the perimeter of the area that the sandbox will occupy. Dig the soil about 20 centimeters over the entire area of ​​the intended area, level the bottom, clean it of the remnants of roots, stones and irregularities, and then lay a film to protect it from plants.

To make a lockable sandbox with a bench, you need to make the lid correctly. First, you need to distribute the prepared materials depending on their quality: boards with a flat surface should be placed closer to the middle of the structure, while it is necessary to lay them with the smoother side to the sand. To the previously prepared box using self-tapping screws, you need to attach two boards with pilot holes drilled in them. It is better not to tighten the self-tapping screws, otherwise the wood may crack. The gap left should be about a centimeter.

The seat will be connected to the box using the edges of the structure that are already attached to it: metal hinges are used to connect to them. To tie the boards together, you need to use short bars, two of which are attached at the edges, and one in the center of the bench: thanks to these bars, the back of the bench will not move forward while using the product.

Put the finished seat on the already fixed boards and place a pencil between them, which will show the size of the gap suitable for the hinge. The hinges must be secured with self-tapping screws.After the work done, it is worth trying to raise and lower the resulting structure and make sure that it works. To securely fix the seat, you can use three hinges instead of two, distributing them along the length of the bench.

The last two boards will be used to make the back, which also needs to be secured with loops. To begin with, it is worth fixing only one board. When installing the second one, you need to use bars that will integrally fasten the boards of the backrest together, and also prevent it from tipping back. The planks should be perpendicular to the roof planks and the gaps should be carefully aligned. It is advisable that the lid is closed, so that during windy weather the sandbox does not open and the benches are not broken.

Often, children's sandboxes are prudently made with a canopy. There are different ways of fixing it, but for a structure with a standard base, you can choose a simple but reliable method that will work in this case, because the shape of the sandbox allows it. To build a canopy, you must:

• fix the racks in the corners of the box;
• connect the tops of the racks with one strapping;
• install the awning on the resulting frame, use decorative nails for fastening, it is desirable that the awning is waterproof.

After completing the main part of the work, you need to carefully sand the boards again. After that, you should take care of the treatment with an antiseptic. Much attention is usually paid to the last stages: painting and varnishing, which will create additional protection against splinters under the child's skin, as well as increase the level of durability of the painted wood.

To choose the right paint, it is worth taking into account several important nuances.

• Antiseptics and impregnations for wood are quick-drying and non-toxic substances.

• The safest option is eco-paint, which is based on natural resins.

• Paints for outdoor use (enamel, facade paint) dry quickly, but are more toxic and can be harmful. Nevertheless, they perfectly tolerate atmospheric and natural phenomena.

• In any case, coloring should be carried out a week before the children start playing in the sandbox. During this time, the paint or varnish is completely dry, and the smell disappears.

After completing all the stages, it is worthwhile to take a responsible approach to the choice of sand. It should not contain foreign impurities or objects; for a fun game, the sand should have good flowability, but at the same time be shaped so that children can sculpt castles and Easter cakes from it. An important criterion for children's health is dust-free. The sand can be washed and dried, or a very fine sieve can be used. It is important that the material is hygienic, and there are no animals in it - this can harm the child. It is better to give preference to already sifted sand: river or quartz.

In order to provide the child with a safe pastime, the product must be regularly looked after: change the sand twice a year, cover the sandbox so that unwanted objects do not fall into it. It is important that the play area is always kept clean.

How to make a sandbox with a bench cover, see below.