MATRIX sandblasting guns

The sandblasting gun is designed for processing parts from different materials. The device is used in everyday life, at a construction site and for solving problems in the industrial field. The tool allows you to handle even hard-to-reach places. One of the most popular manufacturers of sandblasting guns is MATRIX. The company's products have won the trust of professionals and DIYers.

MATRIX sandblasting guns allow you to level any surface, grind, clean the part even for a person with no experience, who works in his own garage or at home... The pneumatic tool is highly prized by motorists. It allows you to independently and without unnecessary financial expenses remove rust from the car or prepare it for painting. Even jack-of-all-trades will find a use for the device, because thanks to it you can make patterns on glass and matting.

The design is robust, there is a handle and a nozzle with a separate hole for an air jet. Any surface is cleaned by compressed oxygen and sand, which comes out of the nozzle under pressure. Typically, such a device is used to process metal, glass and concrete.

Sandblasting guns from the company can be with a hose or with a bottom tank. In the first case, the structure has two tubes for supplying air and abrasive from separate containers. Mixing takes place inside the body of the gun, and then it is applied under high pressure to the surface to be treated. Such a gun differs in power and mobility, works without shutdown for a long time.

In construction, it allows you to clean large surfaces in one go. This is a great solution if there is really a lot of work. At the same time, models of this type combine light weight and compactness.

MATRIX pistols with a bottom tank are less powerful. The operating time is significantly limited by the capacity of the tank, which is filled with abrasive. This is a good solution if the job is simple and fast, but repetitive. It will be extremely difficult to process a large surface, however, the unit is suitable for home use.

Any sandblasting gun has a fairly simple design. The main action is carried out thanks to the compressor, which pushes the abrasive to the nozzle with air. It is through this hole that the mixture goes outside, making processing. The result directly depends on the characteristics of the nozzle. Consider the main structural elements of a sandblasting gun:

• abrasive is fed through the nozzle hole;
• the tip can be made of special steel or ceramic;
• the handle is needed for control: it depends on how convenient it will be to work with the pistol;
• the body itself has holes for hoses through which the abrasive mixture and air are supplied.

The principle of operation is quite simple. The device itself consists of a hose and a suction valve, a gun itself, a compressor and a pressure blower. The simplicity of the design ensures trouble-free operation. At the same time, there is also a container with an abrasive. It can be built-in, but sometimes additional modules of arbitrary size are used.

The MATRIX range includes two reliable sandblasting guns.They are able to satisfy any specialist, and work from a household compressor. The models demonstrate good performance and durability, they are made with high quality and thoughtfulness. Let's give a brief overview of the devices.

• Sandblast MATRIX 57326 with bottom tank. The body is made of high quality metal, wear-resistant, a container is fixed at the bottom. Allows you to remove plaque, rust, dirt, and make grinding. Even at home, you can apply a picture or make the glass frosted, remove oil stains. The mixture is supplied at a pressure of 4 bar. The air consumption is only 230 l / min.

• Gun with hose MATRIX 57328. It allows you to get rid of stubborn dirt, remove old paint, sand or level the surface of the material. The device weighs only 1.2 kg. The mixture is supplied at a pressure of 8 bar, the flow rate is 600 l / min.

The sandblasting gun is a rather dangerous piece of equipment. This apparatus is used in many areas. Allows you to clean glass, metal or concrete from any dirt, rust, paint. So, in construction, a gun is most often used for painting metal. It can also be useful for clearing the site before finishing.

In a car workshop, the device is used to remove rust and paint from metal. You can also clean any part from oil or dirt. The sandblaster is able to grind and polish any surface to an ideal state. Even glaziers use it. The device allows you to matte workpieces and apply complex attractive patterns on them. Glassware is often decorated with a pistol. This is the easiest way to make a product more attractive with minimal effort. Similar tasks can be performed at home as well.

An overview of the MATRIX sandblasting gun in the video below.