Sand concrete brand M500

Concreting is one of the most difficult and important stages in the construction and renovation process. The result of construction depends on the quality of such actions, whether it is pouring the foundation of a building, installing floors or installing cover or floor slabs.

One of the most important elements of concreting, without which it is impossible to imagine the process itself, is a cement-sand mortar. But it was like that before. Today, there is no need for it, because there is a new and modern material, the quality and technical characteristics of which are no worse. We are talking about sand concrete of the M500 brand. It is about this free-flowing building mixture that will be discussed in the article.

The composition of sand concrete of the M500 brand includes only sand, concrete and various modifying components. Large aggregates such as crushed stone, gravel or expanded clay are absent in it. This is what distinguishes it from ordinary concrete.

This mixture has the following technical characteristics:

• the maximum particle size is 0.4 cm;
• the number of large particles - no more than 5%;
• density coefficient - from 2050 kg / m² to 2250 kg / m²;
• consumption - 20 kg per 1 m² (provided that the layer thickness does not exceed 1 cm);
• liquid consumption per 1 kg of dry mix - 0.13 liters, for 1 bag of dry mix weighing 50 kg, on average, 6–6.5 liters of water are needed;
• the amount of the resulting solution, the kneading field - about 25 liters;
• strength - 0.75 MPa;
• frost resistance coefficient - F300;
• water absorption coefficient - 90%;
• the recommended layer thickness is from 1 to 5 cm.

The surface filled with sand concrete hardens after 2 days, after which it can already withstand the load. It is also worth noting the resistance of the material to temperature extremes. Installation work using sand concrete can be performed at temperatures from -50 to +75 ºC.

Sand concrete of the M500 brand is one of the highest quality and most reliable materials for installation and construction works that exist today. It has a number of features, among which it is worth noting:

• high strength, wear resistance;
• corrosion resistance;
• minimum shrinkage factor;
• homogeneous structure of the material, there are practically no pores in it;
• high plasticity;
• high coefficient of frost resistance and water resistance;
• ease of preparation and kneading.

As for the shortcomings, it is regrettable, but they also exist. Rather, one, but quite significant - this is the cost. The price for sand concrete of the M500 brand is very high. Of course, the properties and physical and technical parameters of the material fully justify it, but such a price excludes the possibility of using the material in everyday life.

The use of sand concrete M500 is relevant in industrial production, in cases where absolutely all parts and structural elements of a building or structure to be erected must have high strength. It is used during installation:

• strip foundations for buildings, the height of which does not exceed 5 floors;
• blind area;
• load-bearing walls;
• bridge supports;
• brickwork;
• supports for hydraulic structures;
• paving slabs;
• wall blocks, monolithic slabs;
• high-strength floor screed (flooring made of M500 sand concrete is made in garages, shopping centers and other places that are characterized by a constant high load).

As you can see, the scope of application of this bulk building material is quite wide and varied... Very often, this type of material is used for the construction of underground structures, such as metro stations.

Sand concrete mixture is extremely rarely used in private construction. This is, of course, due to the high cost of bulk building material and its high strength. If on the territory of a private house it becomes necessary to erect a one-story building or a temporary building, concrete of a lower grade can be used.

Sand concrete is sold in bags. Each bag weighs 50 kilograms, and on each bag, the manufacturer must necessarily indicate the rules and proportions for preparing the mixture for its further use.

To obtain a high-quality mixture, you must observe the proportions and follow the instructions:

• pour about 6–6.5 liters of cold water into a container;
• the concrete mixture is gradually added to the water in a small amount;
• It is best to mix the mortar using a concrete mixer, a construction mixer or a drill with a special attachment.

Ready-made mortar "sand concrete M500 + water" is ideal for leveling floors and walls. But if it is necessary to fill the foundation or concretize the structure, it is also necessary to add crushed stone.

As far as water is concerned, there is a very thin line here, which in no case can be crossed. If you add more water than needed, the mortar will lose its strength, as the amount of moisture allowed is higher than normal. If there is not enough liquid, the surface will spread.

The ready-made sand concrete solution must be consumed within 2 hours after preparation. After this time, the solution will lose its plasticity. Consumption per 1m2 depends on the type of work and the thickness of the applied layer.