Sandstone paths

Slabs made from sandstone have recently become very popular. This stone is used most often in construction. This is an excellent option for finishing and cladding surfaces, it is also used for decorating paths. To achieve the maximum result, working with such material, it is necessary to take into account the features of the stone, the technology of its laying.

The natural stone got its name due to the fact that it contains quartz grains the size of a grain of sand, bound together by a substance like cement. The composition of sandstone can include quartz, feldspar, micaceous minerals. Its structure can be layered, smooth or porous. It depends on the natural conditions in which the stone was formed.

The color range of the natural material is varied, which makes it possible to use it both in landscape design and for decorating premises inside and outside. The variety of shades and patterns of sandstone makes it possible to successfully use it to decorate various surfaces. The composition of the material can be different; quartz compounds, elements of feldspar, clay or iron ore can be found in it, which directly affects the density of the material and its shade.

For the arrangement of the local area in the country or in a country house, a variety of materials can be used, one of them is sandstone. It is suitable both for finishing various surfaces and for creating garden alleys. The use of stone will make the base reliable, increasing its strength and safety, while it will become very attractive outwardly.

A path made of sandstone is an excellent option for arranging a backyard area. Paved paths on the lawn will make it visually more interesting, allowing you not only to move along them, but also to carry out various garden work in the form of watering the lawn, cleaning it.

For walking paths and driveways, layered sandstone is more suitable. It can simply be used to make tiles for covering, but they do not have to be cut to the same size and thickness.

The use of various types of sandstone makes it possible to build convenient and functional access roads and paths.

The advantages of such material include the fact that it has:

• unique structure with low water absorption;
• natural color;
• rough surface;
• aesthetically pleasing appearance.

The density of sandstone can vary depending on the composition. The material has a porosity of 0.7%. Its refractoriness is +1700 degrees, which is especially important when finishing indoor surfaces with this material. For garden paths, this indicator is not important.

This material is easy to work with, comfortable, strong and durable. The presence of roughness on the surface of the tracks will prevent the car from slipping in the event of emergency braking. Using tumbling material, you can create an unusual and unique design on the site near your home, decorate a pool, fountain, small pond or any suitable device.

When choosing a material for performing such work, you need to make sure of its quality. To do this, you need to take a stone and visually make sure that there is no marriage.

• On the surface there should be no traces of delamination from the end side, which often appear under the influence of various natural influences. When choosing such a stone, the surface will soon begin to deteriorate, which will lead to its deterioration and crumbling.
• Make sure that there is no limescale on the surface, as the inclusion of lime may indicate a decrease in strength.
• If there is an abundant layer of rust, it must be removed, otherwise this can also lead to the rapid destruction of the stone.
• It is advisable to evaluate the relief of the selected material. Usually the yellow flagstone is more prominent than the gray one.

When choosing a suitable material, it is necessary to consider for what purposes it will be used. For ordinary garden paths, sandstone can be purchased with a smaller thickness, and for driveways, a stone with a slab thickness of at least 30 mm is chosen. In certain cases, specific requirements apply to the material. When choosing tiles with the smoothest possible surface, a tumbling stone, cleaned of oxides, is more suitable.

Experts advise purchasing sandstone from one batch. Even if the material looks identical, stones from different batches can be strikingly different after they have been washed and varnished. If you have very large pieces, it is better to break them down into smaller pieces. This will make the path outwardly more beautiful, while there will be much less hollow places. If you have any doubts about choosing a stone, it is advisable to contact the seller or manager for help.

Sandstone can be laid in different ways, so they are carried out taking into account the type of work to be done. The installation of the stone can be carried out vertically or horizontally. The vertical method is suitable for finishing work in the design of facades, for the creation of decorative elements. To create alleys, driveways, the horizontal method is suitable.

Paving is produced either dry or wet, in a more traditional way. In the dry method, various layers are used, consisting of crushed stone, cement-sand mixture and stone. Usually installation with dry technology is carried out, starting from the edges, and then moving to the center.

The technology of the traditional so-called wet method is also simple and does not require any special skills. With the wet method, you need to pour cement on the sand, mix the mortar and mix it with Ceresit 85 type glue.

Many craftsmen recommend traditional paving. To do the job correctly, it is advisable to heed the advice of experts and carry out the installation in stages.

Before starting work, you must prepare a solution. To prepare the mixture, sand and cement are prepared in a ratio of 3 to 1, then the Ceresit 85 adhesive base is added to the mass. If the thickness of the material is less than 30 mm, no glue can be added to the batch.

In order for the laying to remain reliable for a long time, you should take a concrete screed with a thickness of up to 100 mm, then reinforce it using a construction mesh, and lay out the prepared mixture.

The initial stage of work is as follows:

• make markup;
• hammer in the pegs;
• to determine the height - pull the string;
• remove the soil to a depth of about 25 cm;
• fill up the prepared place and tamp;
• put a reinforced mesh and fill it with the prepared solution.

After that, it is necessary to allow the mixture to dry. In the warm season, it is advisable to cover the site with a film so that the mixture does not dry out. Then, sandstone cladding is performed in a dry or traditional way.

The steps described above are carried out in the case of a quick installation.

The paving of paths, which will be subjected to heavy loads in the future, is carried out in a certain way:

• it is necessary to lay geotextiles and cover it with sand, then carefully level and tamp everything;
• lay out a layer of rubble on top;
• a metal mesh can be used as a frame;
• pour concrete over the laid out materials (concrete thickness should be 60 mm);
• after 48 hours, start laying the stone.

When constructing paths, stone elements can be sunk into the ground so that the coating does not protrude beyond the height of the ground, or they can be placed above the surface. When choosing the second option, the width of the alley should be increased to form its borders with a curb, which is installed on a cement composition.

To make the finished path look aesthetically pleasing, it is necessary to prepare the stone in advance. Experts advise to pre-soak the sandstone - this will help get rid of the remnants of salt that is ready to show through on the already prepared masonry. Next, the stone is cleaned of moss or dirt using a metal or plastic brush. Having cleaned the material, it is laid out on a pre-spread film to select the size, shape and shade.

Having built paths from this natural stone, it is necessary to ensure proper care for them, clean them regularly and keep them clean. Several days after carrying out the described work, the alley should be sprayed with water, paying special attention to the seams. At the same time, when filling the joints, the ingress of water should be excluded, otherwise the presence of water between the slabs can lead to a split of the stone or its detachment.

To give the effect of a "wet stone", many craftsmen recommend covering such paths with colorless varnish. This will make such surfaces more interesting in appearance, adding some zest to the landscape design of the backyard or local area.

The choice of sandstone for paving paths will make them functional and comfortable. At the same time, such alleys can become the main part of landscape design, they will give a special flavor to the site, help to highlight certain zones, to divide them.

To make the site more decorative, many landscape designers use a combination of laid tiles with germinated grass. Although such trails will not be durable, they will be able to fulfill the functions assigned to them.

The use of tiles of different colors and shapes will allow you to achieve an impressive effect when decorating.

Any option for using sandstone for landscape design will decorate the territory and make it more accurate, the main thing is to adhere to all recommendations for the choice of material and its installation.

How to make a garden path from natural sandstone stone, see the video.