Perforators "Interskol": description and operating rules

Interskol is a company that manufactures its equipment on the territory of the Russian Federation, and it is the only one whose product quality is recognized at the world level. Interskol has been supplying its perforators to the market for 5 years, and during this time users were able to assess the advantages and disadvantages of the units.

In the modern construction equipment market, the rock drills of this company are presented in a wide price range. The models are designed for different budgets, while all of them remain at the highest level in quality and reliability. The device, like most standard rotary hammers, is nothing special. The main characteristics to rely on are: power, dimensions and weight, number of revolutions, power supply system.

The P-22/60 ER perforator can be purchased at a low cost. It is more often used in everyday life. The power of the tool is 600 W, and the total weight is only 2.2 kilograms. The design of the keyless chuck significantly reduces the time spent by the user to change the working nozzle, or as they used to call it in the professional field - accessories. Each model comes with instructions and a design diagram.

There are also more expensive tools on the market with better functionality. Their main disadvantage is not only cost, but also significant weight. The increase in mass is a consequence of the use of more component parts. On average, their weight ranges from 6 to 17 kilograms. If you plan to work in an upright position, then the weight of the structure is beneficial because it exerts additional force without the need to use the force of the user.

On all rotary hammers of this company, it is necessary to mark the shape and position of the handle. The manufacturer placed it on the side, because during operation it turned out that this is the optimal place for it. There is also a depth gauge in the design of Interskol perforators, additional brushes and even an indicator that notifies the wear of carbon brushes, and therefore the unit will turn off after 8 hours. If we take a closer look at the models that demonstrate increased power, then they have a hexagonal chuck in their design, which is excellent for drills with a large shank diameter. Such units operate from the mains, more compact from a storage battery, as an example PA-10 / 14.4. Those rotary hammers, which work independently from the power source, can drill and be used as a screwdriver.

The company strives to follow quality standards, therefore, it uses only tested and reliable parts.made from durable materials. On the rotor, the winding and insulation are particularly resistant to overheating when the potential load increases. The handle has a special rubberized insert that provides high-quality grip of the hand with the surface of the hammer drill.

If we consider the entire range of Interskol perforators, we can distinguish two models that are popular with users.

Among the range of units for household use, he distinguished himself Interskol 26, which, according to reviews, is enough to solve standard everyday tasks. It is quite powerful, easily copes with brick and block walls, which crumble under such an onslaught in a matter of seconds. It is possible to drill holes to hang furniture later. The purchase will cost the consumer 4,000 rubles, compared to other global brands, this cost can be called acceptable. The power of the unit is 800 watts.

A hammer drill is not suitable for a large volume of work, it is better not to skimp and buy a more powerful model that will not wear out as quickly as Interskol 26. In their attempts to save money, many users failed, because they did not solve the tasks, and lost a new tool. If you do not go too far, follow the manufacturer's recommendations, then you do not have to worry about the safety of the punch when installing window structures, doors, chipping walls and installing plumbing equipment.

If we talk about the shortcomings and comments of consumers, then most people agree that not all materials are of high quality. Special note on cord that smells strong. One of the frequent breakdowns in Interskol 26 is the gearbox, since it is made of low quality steel, and therefore cannot withstand the load. But there is also a positive point, the repair of such a unit is cheap and fast, and the parts can be easily found in any service. The described model has a twin brother - Interskol P-30/900 ERwhich has more power. This figure is at the level of 900 W, therefore, it also has a higher number of revolutions than the previous model.

If we talk about the advantages and disadvantages of this perforator, then they are the same for all models of this company. The cost is also not much higher and amounts to 5500 rubles. The tool is powered by a rechargeable battery, so it is mobile, convenient and reliable. The battery capacity is 1.3 A * h. If translated into the number of hours during which you can use the puncher, then it does not even reach one. After 40 minutes of intensive use, the battery will drain.

One such tool can replace three:

• puncher;
• drill;
• screwdriver.

Each manufacturer dictates its own rules for the operation of equipment, in accordance with which the user should act. Failure to observe them leads to a decrease in the operational life. On some Interskol perforators there is a regulator that switches the equipment to the drilling mode. The revolutions are gained gradually, the control is carried out through the "Start" button. If you push it all the way, then the tool begins to work in the maximum mode for itself. The speed is adjusted according to the material in which the hole is to be drilled. Wood responds better at maximum RPM, concrete at medium speed, and metal at low speed.

Not everyone knows why rock drills are best suited for drilling holes in concrete and brick. The fact is that they have a larger backlash in the design of the cartridge, therefore, the shock load does not have a negative effect. But for the same reason, using a hammer drill is difficult to achieve accuracy when working in wood or metal. The drill wiggles, the edge comes out uneven, to improve accuracy, the chuck must be changed to a cam chuck. Most often it comes in the kit, but you can also purchase it separately.

The user must be able to properly remove and insert the drill or drill. With a keyless chuck, everything is simple, just pull the base off the chuck, put the nozzle on and release. A subtle click will be heard, which indicates that the clutch has occurred as it should. In the same way, the equipment is taken out and changed to another.When the chuck is of the cam type, the drill is fixed in the traditional way. The case will need to be disassembled by unscrewing the cartridge, changed, and then screwed back until the thread is completely tightened.

It is important to observe safety precautions when using a hammer drill.

• The tool should not be wet or damp, as there is a high probability of a short circuit.
• During work, a person should not have metal jewelry, and his clothes should meet the requirements: rubber shoes, if it is a tool powered by a network. The sleeves on the jacket are rolled up, gloves are put on the hands.
• The puncher is not used alone, but another person must be present nearby for safety reasons, since the tool must be in a strictly vertical position, so you will need to hold it firmly.

Let's consider what sequence of use of the punch the manufacturer provides.

• Before using the nozzle, apply a grease to it. After the lubricant is distributed, the snap is inserted into the body until a click is heard, or simply screwed in until it stops. In this case, we are talking about keyless and cam-type chucks.
• If necessary, the user will be required to set a limit on the immersion depth. This is usually necessary when using a borax.
• The tool is first set in working position, after which it is connected to the power supply. The cartridge begins to spin, the speed is adjusted through the trigger on the body, if it is not there, then a regulator is necessarily provided.
• Do not use extra effort when working on a horizontal surface. As a result, the wall may not withstand and collapse, or the attachment will become unusable. The drill angle is 90 degrees.

There are many reviews on the Interskol perforators on the Web. Some say that in the assortment you can find both a tool for domestic use and for solving professional problems. Others are dissatisfied with the poor quality of the materials used, therefore, argue that the service life of rock drills is short, since they have to experience a large number of loads on themselves. One of the problems is the jamming of the drill in the cartridge, all because there are slots, the cord is weak, and inside the case is small. Moreover, some models have low power, but their price is higher than that of other brands, and with weak functionality.

For information on how to use the puncher correctly, see the next video.