Description and use of foam cutters

Polyfoam is a fairly durable and practical material that is often used in a variety of construction work. But most often it comes in the form of large slabs. To cut such canvases into pieces of the required size, special thermal knives should be used.

Foam thermo knives are a special device designed to cut this material evenly. It consists of a thin metal wire that is heated by an electric current.

In the process of moving along the foam, the tool begins to melt its path. Due to the porous structure, this material will begin to decrease in volume during such processing, therefore, as a result, the device leaves behind a cut larger than its own diameter.

Now we will take a closer look at individual models of such thermal knives.

• Canty KD-7H - 190W. This tool can be used to process foam, polyurethane foam, various artificial fabrics, ropes, slings. It is ready to work within 4-5 seconds after switching on. The model provides the fastest and most accurate cutting of foam plates. It has a special insulating protection. During processing with such a device, dust and other debris will not form. The variety is equipped with a special temperature regulator, a convenient mount, which provides quick and easy blade replacement. The device has a comfortable ergonomic design. Its maximum heating temperature is 600 degrees. The sample is sold with a small plastic case for storage and carrying.

• Canty KD-7H - 320W... This heat knife can also be used for styrofoam, fabrics, rope, polystyrene and polyurethane foam. It is widely used in construction and sewing applications. The specimen is equipped with the thinnest, but at the same time very strong and durable metal blade, which provides an even and neat cut. The variety also has special insulation protection, a step-by-step temperature controller. Ergonomic design provides user comfort during work. The instrument has a power of 320 watts. The highest heating temperature is 600 degrees. The model also comes in a handy plastic case.

• Insulation panel cutter REXANT, blade 340 mm. This device can also be used for styrofoam. Its blade is made of high quality stainless steel. The handle is made of durable plastic. This product has a total length of 475 millimeters. The blade has a special additional overlay, it performs a protective function. One set also includes a protective case.

• Canty KD-7-3 - 90. The model provides the fastest and most accurate material cutting. In its case there is a special cooler, it allows you to prevent overheating of the product. The variety is supplied with a convenient temperature regulator. It is equipped with a thin blade that will cut the thinnest materials. This instance has a power of 90 watts. The maximum heating temperature of the product is 500 degrees, it heats up in just two seconds. The sample comes with a hex wrench, plastic storage case, blade and wire brush.

• Canty KD-5-0 - 120W. Such a heat knife can easily handle materials of various thicknesses. The device has a power of 120 watts. It can heat up in just 4 seconds to a temperature of 500 degrees. The model is supplied with a fairly thin, but strong and reliable blade. It is also sold with a hex wrench, plastic case, wire brush.

• Canty KD-7-0 - 120W. This electric foam hot cutting tool also has a special cooler in the housing that protects the knife from possible overheating during operation. The device has a convenient regulator that allows you to independently set the required temperature. The maximum heating temperature is 500 degrees, while heating up occurs in just 2 seconds. The unit has a power of 120 watts.

• REXANT, blade 280 mm. This hot knife is equipped with a fixed blade design, which is made of machined stainless steel. High quality plastic is used in the construction of the handle. The variety also has a special protective strip on the cutting edge. The total length of the product is 420 millimeters. This thermal knife comes with a handy plastic case.

In order to properly evenly cut the foam with such a product, you should remember some important rules for its use. So, in order to cut a piece of the required size, such a unit should be gradually moved along the plate at an average speed.

It is necessary to cut with forward movements. Plates that are too large are best handled by two people at once. Moreover, the foam must first be securely fixed so that it does not move during the cutting process.

remember, that electric tools are worth using if you need to cut such material with a thickness of 50 millimeters or more. Thinner slabs can also be processed using simple handicrafts (hacksaw).