What kind of crafts can you make from tree stumps?

You can make a lot of different crafts from stumps. It can be both various decorations and original pieces of furniture. It is easy to work with the specified material, and the result can ultimately delight the master. In this article, we will find out what crafts can be made from tree stumps.

Before taking on the manufacture of natural homemade products, the master must know exactly how to work correctly with the material. There are a number of standard actions that must be followed by a master who creates any craft. Let's consider what procedures are needed.

Debarking is a must for proper stump handling. This operation is carried out if serious damage, dust, pests are traced under the bark of the wooden base. Debarking will also be necessary if the bark seriously spoils the appearance.

Pieces of bark are simply gently pryed off and then peeled off.

In places where the bark has separated from the base, it is also caught with a chisel and removed in whole layers. If the bark sits too tightly, then the chisel must be attached to the bast or cambium. After that, by lightly tapping the hammer, the tool is guided along the barrel. This way you can easily break off pieces of the crust.

Debarking is an operation that will require great care from the master. If the chisel suddenly touches the hard sapwood of the stump, then it will not be possible to get rid of the remaining damage.

For competent and accurate work with stumps, the master must remove all affected areas. It so happens that there are pronounced rotten places on the wood. They greatly spoil the appearance of the natural material.

It will not be able to harm the healthy surfaces of the tree, but it will clean up dust and other defects very easily.

If there is nothing in the inside of the stump, and it is empty (the core has rotted), then this area is simply cut out using an electric jigsaw. Some craftsmen prefer to use a chainsaw. If the core of the hemp is intact, it will be convenient to cut the contour with a jigsaw. After that, very carefully, in small pieces, it will turn out to break out the defective wood with a chisel.

If the depth of the lesion exceeds the parameters of the jigsaw file, the rest of the defective material is removed with a chisel. First, the contour line is deepened to it, and then removed in strips 2 millimeters thick. The chisel should not be used immediately, since there is a high risk of going outside the contours and causing serious harm to healthy wood.

Many craftsmen remove damaged areas with a metal brush. It is installed on a grinder or drill with a smooth start and speed control. Such a method is relevant and in demand, since after its application, clear edges are not visible on the tree. Thanks to this, the treated surfaces look neat.

If wood processing is carried out with the above tools, the master must use a respirator and goggles, since the brush always creates a lot of dust.

Before creating this or that craft, the surface of the stump must be leveled. All protruding parts (branches, twigs) must be well processed. First, such parts are cut off with a hacksaw or chainsaw, and then the surface is leveled with a well-sharpened plane.

Getting rid of irregularities that often appear on old wood, the plane can be moved exclusively from top to bottom. Otherwise, you can leave a lot of scoring on the base, which will be very difficult to get rid of later.

You can also level the surface of the stump with an ax. Usually, this method is used when it is necessary to level an already damaged tree. The best results are obtained by a blow struck with a blade directed in relation to the direction of the grain of the tree at an angle of 10-25 degrees.

If the bumps on the stump are relatively small, they can be removed with a coarse emery sander. It is allowed to move this tool in any direction - after that there will be no scoring. True, it is not recommended to make too sharp movements and strong pressure.

The whole point of this manipulation is to cut one or a number of layers from the hemp, which can subsequently be used in different ways. The stump, on which the lower or upper part is clearly cut off, can be used as an original decorative stand, a small table (dining or coffee).

To properly cut the stump, it is fixed so that the line running in the inside of the trunk from the roots to the top is strictly perpendicular to the floor surface. After that, be sure to mark the line of the future cut with an ordinary felt-tip pen or marker.

After that, the guide is thrown over it and on the back side is attached to the furniture corners with self-tapping screws. Once all the parts are installed, the saw bar is moved along the guide.

Working correctly with stumps, one must not forget about competent cutting. If you need to cut a healthy piece of stump, it is advisable to use a compact chainsaw. True, she will only be able to make rectangular notches. If they need to be more complex in shape, then the main part can be removed with a chainsaw, and the remaining sections can be trimmed with a knife and a chisel.

When chiseling, the master must work with a chisel. With this tool, you will need to act on the workpiece in the direction across the wood fibers.

An operation due to which the surface of the wood is perfectly smooth and neat. It is not recommended to use a sander for this. Better to do everything by hand using different sizes of sandpaper. First, they use a large one, and then gradually move on to the smallest.

It so happens that it is not possible to completely remove the pile with emery. In this case, the surface of the wood can be slightly moistened. This will allow the villi to rise. Then the sandpaper will need to be moved in turn - from bottom to top and across.

Stumps can be used to make very reliable, high-quality and beautiful furniture. Many options can be easily built with your own hands at home. Consider several schemes for making various furniture from hemp.

A very interesting solution is to make a comfortable chair from a large stump. The resulting product can be used to decorate a garden. At the dacha, such garden furniture will definitely not go unnoticed!

We will analyze the step-by-step instructions on how to design a chair from a stump yourself.

• First, the master must prepare all the necessary tools. It is advisable to have at least minimal skills in working with the material in question.
• For the manufacture of a chair, it is better to use a stump 40-60 cm high from the ground. If you are cutting a workpiece from the trunk yourself, you need to take a larger height. For example, for an armchair of 50 cm, you will need a blank of 100 cm, because the furniture will still have a back.
• Next, you need to form a support under the back. A horizontal cut is made at the seat level. The cut will need to be made to a depth of 2/3 of the trunk. It is necessary to saw through from the side in which the chair will "look" later.
• To form the back, a vertical cut is made from the top until a horizontal cut is reached. The cut piece must be removed.
• The base is ready. Now the chair needs to be decorated. At this stage, the master will need a chisel and a sander. It all depends on what kind of decoration you want to apply to your homemade furniture.

From the stumps, it will be possible to form an excellent bench on wheels. Using a chainsaw, you need to cut the stump so that both the upper and lower cuts are parallel to each other, but perpendicular to the axis line. Let's consider step by step how to proceed.

• Both surfaces will need to be well leveled with an electric plane or sander.
• The bark can be removed or left - everything is decided by the master.
• The cleaned tree can be decorated as you like.
• On the top of the bench, you can put a piece of foam rubber and beautifully cover the base with leatherette. As a result, the bench will look like a cozy pouf.
• You can build a coffee table in approximately the same way, but for this you need a stump with a more impressive difference in circumferences (between the aboveground and underground parts). The underground half, which is located above the level of the roots on the sides, will serve as a top, and wheels must be attached to the upper cut.

Using hemp, you can build a wonderful decorative table that will look very original and interesting. Such a piece of furniture will definitely refresh the surrounding environment.

When making a table from hemp, the main problem is the choice of the material of the table top. It is not so easy to find a stump with a top diameter of 80 cm or more, and then make a perfectly flat cut with a suitable thickness. For this reason, countertops are so often made from other materials, for example:

• board made of boards;
• Chipboard, OSB;
• glass;
• plexiglass.

To attach a beautiful glass tabletop, you need to use a special adhesive based on epoxy resins. Degreasing components will also be needed. Sometimes craftsmen first glue the epoxy cap, and then level it until they achieve the desired plane. Then the tabletop is glued with a special glass glue.

The tree stump is a great base for a chic and original looking flower garden. Many gardeners resort to placing such decorative items on their plots.

Basically, flower beds are made from stumps sticking out in the ground or previously uprooted - both options are suitable. If the stump is in the ground, it will be much more difficult to work, since people have to bend very much. If you want to cut out some drawings on such a flower garden, you will have to act even while lying down.

It is much easier to work with an uprooted tree stump. He is lifted to the workbench, where all manipulations are carried out extremely simply and conveniently.

You can pre-drill a drainage hole in the stump, after which you can plant the plants not directly into the wood, but in a separate pot, which will later be inserted into the prepared recess. After that, the stump itself will need to be carefully treated with a special hydrophobic / antiseptic solution, and then smeared with high-quality varnish. With this treatment, the flower garden can last for many years.

A properly cut and processed tree stump can be a chic decoration or functional part of a garden or vegetable garden. If you want to ennoble your site, you can make an original border for flower beds or flowers in pots from hemp, make interesting animal figures (hares and owls are often made).

If you want to build from hemp not just a fence for a garden bed, but a more complex figure, for example, it can be an originally designed goblin, an owl, mushrooms and other "forest" objects, then the master must be able to competently work with wood. This is especially true when it is necessary to cut small and detailed parts into the stump.

If you don't have the proper knowledge and work experience, you can make an extremely simple, but very cute figure out of a stump. It could be a charming fly agaric. To make it, you only need to prepare an enamel bowl or bowl, as well as an aerosol. The bowl should be cleaned and then spray painted with deep red paint. When the coloring layer dries out, on a red background it will be necessary to draw snow-white circles, like on a cap of a real fly agaric.

The stump itself should be painted white. To make the figure more original, you can draw a smiling face on the stump. After that, all that remains is to put on a painted hat over the beautiful mushroom. After that, the homemade product will be ready!

Also, from the stump, you can build a fabulous teremok, which will surely become a bright accent of the local area. To make such a decoration, you need to prepare a dry, for example, oak stump. It will play the role of the basis for a hut or a tower, decorated with various kinds of decorative elements. Decorating components for the house can be cut from plywood or a piece of fiberboard. The decoration should be attached to the tower with self-tapping screws. The wooden components of the homemade product will definitely need to be treated with antiseptic compounds so that they do not start to rot in the open air.

Often in the trunk of dry trees, very close to the surface of the earth, there are small hollows or growths. These are elements of natural origin, but at the same time they can be safely used to create a spectacular composition. For example, from the hollow you can lower miniature toy ladders with cute gnomes holding on to them. On the growth, which is on the stump, you can arrange various interesting figures.

There is another unusual version of the stump crafts. Otherwise it is called the "green monster". For such a solution, a stump of huge size and with a very powerful root system should be prepared. If you have one in your garden, that's great. All you need to do is buy a moss variety that matches your climate from a garden store. Then he is planted on a stump. Periodically it will need to be sprayed with water. It is important to ensure that the moss grows well. As soon as this happens, it will be possible to fully appreciate the grandeur of the natural crafts.

Using stumps in landscape design is a win-win and very original solution. Consider several bright and beautiful compositions that effectively decorate the garden area.

• You can decorate the garden area with natural furniture made from high and solid stumps. It can be 3 makeshift chairs with high backs, 2 stools made of low hemp, as well as an original table made of wood cuts. Such a composition will be a stunning and functional addition to the local area.

• A pair of stumps, laid "on the edge" and with a sawed-out inner space, can serve as a chic natural vase for bright and elegant flowers of different shades.Different color combinations of buds will look especially expressive against the background of wood: red, purple, green, yellow and many others.

• You can make funny figures with funny faces from hemp. To do this, it is enough to effectively paint them, draw big eyes, nose, mouth on them, glue an improvised mustache made of laces or scraps of fabric - there are insanely many options for implementing such ideas. It's easy to beat the simplest stump with the help of ordinary or glowing paint.

• Design solutions in the form of stumps, made in the form of houses, castles or small towers, look very elegant and unusual. They can be made with a gable roof, tall towers, painted or decorated with carved details - there are no restrictions. Around such chic garden decorations, you can make a neat and beautiful floor, covered with pebbles, or lead a neat garden path to the houses.

• It will be interesting to look at garden furniture, for the manufacture of which birch stumps of sufficient height were used. It can be a combination of 3 chairs with backs and a table made of a large sawn tree stump. The composition will definitely not go unnoticed by guests and neighbors and will perfectly decorate the local area.

An interesting master class on working with a sling can be seen in the next video.