Features and methods of installation of PVC panels

PVC panels are a cheap material, commonly used for the decoration of living quarters and utility blocks. At a relatively low cost of such cladding, the decorative qualities of the coating are quite high. These are practical and durable materials, which are also easy to install - even a novice finisher can install the panels with their own hands.

Let's dwell on the advantages of plastic panels:

• Hygroscopicity. Plastic does not absorb moisture, it is not subject to decay, mold does not appear in it and fungi do not multiply, which is why the panels are mainly used in rooms with high humidity (in the kitchen / in the shower room and bathroom).
• Material has a long service life, it is wear-resistant and resistant to small impacts. Of course, if damage is done with a hammer or an ax, the panels will crack, but small mechanical impacts will not leave any marks on the surface.

• PVC panels retain their aesthetic appearance for many years - they do not turn yellow over time and do not fade under the influence of direct sunlight.
• Ease of operation It is also a significant advantage - the panels are unpretentious in maintenance, for their high-quality cleaning, you can use the simplest detergents, but nevertheless, you should not use abrasives and strong acid-base compositions.
• Laying the panels does not take much time and does not require special skills and efforts, even a non-professional will cope with the work.
• Low price. Moreover, this is the case when a decrease in cost does not entail a deterioration in quality.

• Security. In the production of panels, the most advanced technologies for processing raw materials are used, due to which the product does not emit harmful and toxic substances. Hazardous materials are difficult to find even among counterfeits.
• The coating is easy to repair - it is enough to replace one broken panel, and not to remove the entire cover.
• The panels are very aesthetic - manufacturers put on the market products in the widest range, an abundance of colors and textures. Consumers can choose slabs that imitate the texture of wood and stone. Many firms apply photo printing to the panels, and some manufacturers produce non-standard products that differ significantly in their appearance from the usual "official" options.

• Possibility of installation in small spaces - wall panels are great for creating niches in such corners of apartments where working with other materials is difficult.
• PVC plates are installed together with ventilation grilles and sockets, they are not striking and look harmonious in the overall interior concept.
• Many advantages of cladding with PVC panels are associated with the installation of the frame. Due to the formation of an air cushion between the wall and the panels, additional sound insulation is provided, and the space itself can be successfully used for conducting communications or insulating a dwelling.

There are also disadvantages associated with the use of PVC panels:

• When exposed to fire, the material supports combustion and at the same time releases substances hazardous to human health.
• The panels do not allow air to pass through, completely blocking its circulation and necessary ventilation.That is why the scope of application of the panels is limited - they are not recommended to be installed in bedrooms and children's rooms.
• In the southern regions, insects settle in the voids between the panels and the wall, which are rather difficult to remove.
• When installing the panels, the use of a special tool is required and this is also considered a disadvantage. However, all the necessary equipment can be purchased at any hardware store.

The choice of plastic panels is great, in any construction supermarket you can find a wide range of models of any colors and textures. Thanks to modern technologies, such products are created that can add gloss and emphasize the conceptuality of any room.

What you should pay special attention to when choosing panels:

• PVC products are lightweight, but if the purchased panels are too light, this may mean that you have a low-quality fake;
• there should be no coating defects on either side: chips, cracks and scratches indicate the inadequate quality of the product;
• when purchasing panels, you should clarify the release date and marking - it is optimal to purchase those where these values ​​are approximately the same - even within the same model, there can be a significant difference.

PVC panels are produced in the overwhelming majority of cases in Europe and China. Depending on the manufacturer, the technical parameters of the product may vary, however the following are considered optimal characteristics:

• front panel thickness - in the range from 1.5 to 2 mm;
• the number of stiffeners - from 20 to 29;
• lamella weight - from 1.7 to 2 kg per sq. m.

Experts do not recommend making a purchase if:

• stiffeners are damaged and bent;
• the line of the drawing is not clearly expressed;
• the color of the panels within one stack differs;
• the surface has cracks and scratches;
• the segments are of different sizes.

And a few more recommendations:

• the thickness of the plastic should be the same everywhere, any thickening and, conversely, thinner places indicate low quality;
• the thicker the jumper at the cut, the stronger and more durable the structure will be;
• the cells must be perfectly flat, without lumps or dents, therefore all panels should be inspected, even if packed.

And of course, you need to choose the right texture and color. Patterned options are very attractive. In most cases, a pattern is applied to PVC sheet panels. Typically, it is printed on film and then glued to a panel and laminated. Such panels can have a smooth surface or textured, they are very durable, and the price for them significantly exceeds their counterparts without a pattern.

There are no strict stiffness requirements for panels for finishing ceilings - they are practically not exposed to physical stress. Their standard sizes are:

• thickness - from 3 to 5 mm;
• width - from 125 to 380 mm;
• length - up to 10 m.

The parameters of wall plates are different:

• thickness - in the range of 6-10 mm;
• width - from 250 to 300 mm;
• length - less than 6 meters.

Wall panels are often thicker, because when sheathing with wide slabs, the coating visually appears smoother and more intact (since the number of joints is less). At the same time, many finishers prefer a narrow sheet, since it is easier and faster to work with it.

There is a noticeable variation in prices for PVC panels - the cost of the product is influenced by the thickness of the walls, as well as the type of printing and brand.

At the stage of preparing the finishing work, it is very important to correctly measure and make an accurate calculation of the required number of panels and related materials. This is necessary in order to avoid unnecessary costs for the purchase of unnecessary products.

Installation of PVC panels provides for their location vertically and horizontally - it completely depends on individual taste preferences.

For a horizontal arrangement, the area of ​​the room is calculated, from which the area of ​​the openings is subtracted, and the resulting value is divided by the area of ​​the panel.

Again, 10-15% is added to the received private in case of damage to the coating, that is, in reserve. Keep in mind that when mounting horizontally, you will have to cut the panels, so you can end up with a lot of cuttings.

Let's consider an example of horizontal arrangement of panels. Suppose we need to wall the walls in a 6x8 meter room with a ceiling height of 2.5 m. The room has 4 windows measuring 1.2x1.8 m and one arch with parameters 2.2x0.9.

For finishing, panels of 250x30 cm were purchased.

The total S of the walls will be:

(6 + 6 + 8 + 8) x2.5 = 70 sq. m.

S window and door openings:

1.8x1.2x4 + 2.2x0.9 = 8.64 + 1.98 = 10.62 sq. m.

S to finish will be equal to:

70 sq. m. -10.62 sq. m. = 59.38 sq. m.

Next, we calculate the S panel:

2.5x0.3 = 0.75 sq. m.

Accordingly, for work you need to buy:

59.38 / 0.75 = 79.17 panels.

Having rounded the resulting value upwards, we have 80 pieces, 10-15% should be added here and we get about 100 panels.

It is necessary to prepare for working with PVC panels. As already mentioned, the use of this finishing material involves the use of professional tools, namely:

• perforator - will be needed when forming the frame;
• screwdriver - it is used when fixing panels to bars or metal profiles (a perforator can also cope with this task, but it is quite heavy, so it will not be easy for a finisher with little experience to cope with it);
• jigsaw with small teeth or circular saw;

• scruff with an angle of 90 and 45 g;
• stapler - used for the installation of timber battens;
• rubber mallet - required to remove jammed plates; if such a procedure is carried out manually, then there is a high probability of breakage of the crate and the panel itself;
• putty knife - it is used to bend the profile when the very last panel needs to be inserted. It is optimal to use a tool with a length of 80 to 120 cm.

Auxiliary tool:

• tape measure for taking measurements;
• pencil or marker - for making notes on the panels;
• level - to measure deviations from the ideal geometry of the coating;
• square, moldings, clips, edging;
• elements for fasteners (dowels, screws and cleats).

Work with plastic panels begins with surface preparation. To do this, by all means remove the old coating, close up all existing cracks, chips and cracks - only then the finish coating will have a perfectly even and smooth appearance, and most importantly, it will become durable. To prevent the appearance of mold and moss, it is recommended to cover the base base with solutions with fungicides Is a strong antiseptic that will protect the house from the appearance of "uninvited guests" for many years.

At this, the preliminary stage of work ends, then the frame is mounted and the panels are directly laid, and for this, the location of the frame racks should be determined.

For ceilings and walls, the markings are carried out in this order:

1. First, a point is fixed at a distance of 2 cm from the floor or wall, and already through it a straight line is drawn along the entire perimeter. It is at this stage that you will need a building level and a paint thread.
2. When marking walls, exactly the same line is drawn under the ceiling.
3. Further, with a step of 30-40 cm, they draw transverse lines - they will become "beacons" for the construction of the frame.

When decorating walls with PVC panels, first of all, a crate is installed. Most often, wooden slats are used for it, less often - a metal profile (the second can be bent, the first cannot).

Exactly according to the marking, using a perforator, holes are made for fasteners with a step of about 40-50 cm, after which the frame element is mounted to the wall. At this stage, it is necessary to provide places for fixing the wires and make sure that they will not protrude beyond the crate.

If desired, you can use the frameless method and glue the slabs directly to the walls - directly to the concrete It is quick and convenient. However, it should be borne in mind that the surface to be treated must have an ideal geometry - any irregularities impair the quality of adhesion and ultimately reduce the service life of the finish.

In the frameless method, liquid nails or special glue for PVC are used. It is very important to use formulations that do not contain solvents. Otherwise, the plastic will gradually deteriorate.

Work with this type of installation is carried out in the following sequence:

• cleaning the old coating, priming and drying;
• preparation of an adhesive solution with the obligatory observance of the instructions and the indicated proportions of the substance;
• depending on the consistency of the solution, a tool for application is selected - it can be a brush or a paint roller or a spatula;

• with the help of glue, the corner piece is fixed to the concrete wall, to which the ordinary element is subsequently attached using the built-in grooves;
• the panels are pressed with effort for 10-15 seconds and allowed to grab;
• by analogy, all the remaining tiles are mounted;
• attach a decorative element;
• seams are treated with grout or sealant, which act as a decorative connector.

It is possible to sheathe the ceiling with plastic panels in the same way as in the case of walls - with and without a frame.

It is required to assemble the frame in rooms with a high level of humidity and in low-heated spaces. Plates are fixed with fasteners and a profile, so the place of fixation is not weakened under the influence of external unfavorable influences.

The frame is nothing more than a crate with a step of 40-60 cm. As a rule, its assembly is carried out from wooden slats, metal profiles or plastic. Panels are screwed to the crate. This repair is time consuming, but it can be done by a home craftsman, even with little experience.

This is a fairly simple and quick way to sheathe the surface, however, it significantly limits interior design solutions in terms of lighting, since it does not allow mounting spotlights and LED strips, as well as carrying out drywall work in order to build multi-level structures.

PVC panels are widely used when installing slopes on windows. This is indeed an excellent solution that allows you to quickly, easily and cheaply make an aesthetic decorative coating. Thanks to a large selection of panels, everyone will be able to choose exactly the modification that can truly transform their windows.

There are several ways to trim slopes.

With this method, profiles are installed, which become a frame for mounting panels.

The order of work with this method is as follows:

• along the edge of the window frame, a starting bar is installed using self-tapping screws;
• slats are mounted on the opposite edge of the window, it creates the completeness of the contour.

The prepared panel is cut into the desired size, then inserted into the profile, and attached to the rail from the other edge. The panels must be docked with each other. An F-profile is used as a casing. The advantage of this method is its high speed and ease of installation. However, this technology requires additional laying of voids that may form during the work.

Everything is simple here - the panels need to be glued to the slopes using polyurethane foam or glue.

The procedure is as follows:

• first, you should prepare the window well, remove excess foam, putty and level the surface;
• panels are cut in accordance with the parameters of the slopes;
• each part is carefully coated with glue, then the fragment is pressed to the surface for a few seconds and torn off - the final fixation is carried out after a couple of minutes;
• at the final stage, the seams are treated with a sealant and closed with corners of a suitable color.

Fastening the slopes in this way is carried out very quickly, but requires a perfectly flat base surface.

There are several more ways to lay slabs on slopes, but they require a longer time and a bedroom of knowledge.

It is believed that plastic panels require special care. However, this has absolutely no reason - of all types of finishing materials, perhaps, it is difficult to find a simpler and "unpretentious" one. Regardless of whether they are in the hallway or on the loggia, it is enough to wash them a couple of times a year with any traditional dishwashing detergent or soap solution.

However, sometimes during service, more serious dirt appears on the surface - drawings made with felt-tip pens and markers, engine oil stains, scotch tape residues and others. Cleaning abrasive wipes will help to clean them, and if the marks are significant, then liquid cleaners such as Synto-Forte, Graffiti Flussig, etc.

There are several compounds that are not recommended for cleaning PVC panels:

• chlorine;
• degreasing compounds;
• alkaline soap;
• nail polish remover;
• acetone;
• all types of polishes.

When purchasing goods, everyone pays attention to the manufacturer. Image and reputation mean a lot and are a kind of quality indicator. PVC panels in this sense are no exception, there are hundreds of manufacturers on the market, but only a few have won the recognition of consumers.

• Venta (Belgium). The company is a leader in the market of finishing materials in Europe and all over the world. The company regularly opens new production facilities in various countries, and in 2003 a plant in Russia began operating.This made it possible to reduce the cost of plates for the domestic buyer - now Russians can buy models of European quality at affordable prices. The assortment list includes a large selection of panels of all colors and shades, products have the property of increased strength, and printed panels are also available.

• Forte (Italy). The company is considered one of the largest manufacturers of PVC panels in the world, its products are sold in 50 countries around the world. The company constantly operates the strictest quality control, and the technologies are constantly being improved. Largely due to this, the company regularly launches new items on the market - for example, quite recently, decorative panels made using stone chips were offered to consumers. This gives a stylish and highly aesthetic appearance to the coating, making it sophisticated and luxurious.

• Deceuninck (France-UK). An international holding with production facilities located in all parts of the world - the manufacturer of PVC panels has more than 10 factories that successfully sell their products in 90 countries of the world. The holding's representative office also operates in our country, thanks to which the domestic consumer has the opportunity to get acquainted with the panels from Deceuninck.

• Shanghai Zhuan (China). In recent years, Chinese products have made a sharp leap towards improving quality. Of course, not every model labeled "made in China" can be trusted, but products from Shanghai Zhuan Qin Co. Ltd is considered a recognized example of a reliable supplier. The company sells wall panels of different colors, textures, while the prices for products are available to a wide segment of the population.

• Green Line... And of course, one cannot fail to mention the Russian manufacturer of plastic plates. Green Line is a plant in the Vladimir region that supplies its goods not only to Russia, but also to European countries. The manufacturer's assortment list includes more than a thousand modifications of panels, while the price remains at an invariably low level.

How not to make a mistake in choosing panels, see this video.