Porcelain stoneware steps: pros and cons

The building materials market is unusually wide, the area of ​​decorative finishing is especially diverse. This time our focus is on porcelain stoneware, in particular the steps that are often created from this modern material.

The production of porcelain stoneware steps is a small area where this material can be applied. But it is in such elements that it looks the most advantageous. A kaolin clay material is created. Additional components are added to it. It can be mica, spar, quartz.

Porcelain stoneware has a set of features, due to which it is primarily considered for finishing staircases, floors and various areas:

• High wear resistance and resistance to mechanical damage, which allows the use of the material in rooms with a high load on the floor and steps, as well as outdoors.

• Water-repellent characteristics are ensured by a dense structure without pores, cracks and cavities. The production of porcelain stoneware is associated with the use of high pressure. Porcelain stoneware steps can be installed outdoors and in rooms with high humidity.

• Inertness and lack of chemical activity expands the scope of installation of porcelain stoneware steps. During use, they can be cleaned using aggressive products, which ensures easy maintenance.
• Products perfectly tolerate temperature drops from -50 to +50 degrees.

• The material does not pose any danger to the human body and does not harm the environment.

• Resistance to fire and electrical current non-conduction.

• Color fastness, despite exposure to ultraviolet radiation, intensive use, frequent cleaning and other negative factors.

This material also has negative sides. There are very few of them and they can be neutralized or minimized:

• Correct and accurate installation plays a large role in ensuring a long service life. Material performance can be compromised if violations are made during installation.

• The cold surface creates a lot of inconvenience when decorating a living space. This problem can be solved by using a carpet, but in this case the decorative surface of the material will be hidden. You can also install a "warm floor" system, porcelain stoneware allows you to implement such an undertaking.

Porcelain stoneware is produced in a wide variety, which expands the scope of its use and opens up unlimited possibilities for the user to implement bold design ideas.

Products with dimensions of 120/30 cm are more often produced from a solid sheet. The one-piece structure consists of a tread and a riser. Such steps look more neat than a similar construction created by the suture method. Monolithic products are higher, but the strength is also at a higher level. But the repair of a separate part of the steps is impossible; the entire layer will have to be replaced.

Seam and seamless surfaces can be created from individual slabs.The second option looks much better, but it requires experience and a lot of time. Although with skillful installation and a good choice of tiles, the seams can look appropriate and harmonious. Most often, such porcelain stoneware tiles are presented in three sizes: 30/30, 45/45 and 30/60 cm.

The colors of porcelain stoneware are striking in their variety. If desired, you can order a unique material that will make the steps the main element of the interior. Wood-like tiles look noble and fit perfectly into classic interiors. Marble porcelain stoneware steps are a chic option that always remains relevant. Such an element of the interior will stand out favorably and will decorate the room / building. White, black, green, with a shimmer, a combination of several colors - any idea will find its solution in this material.

A tile with dimensions of 1200x300 mm is one of the large options that is popular among Russian users. Porcelain stoneware 300x1200 allows you to significantly reduce the number of seams. There are tiles with an even greater length - 1600x300. Such long elements will cost more than tiles with smaller dimensions, but the installation process is greatly facilitated. There are also some long steps made of porcelain stoneware, their size is 1500x300 mm. Tiles 120x30 and 30x30 are easy to install, their parts are light, small-sized, so you can work with it without assistance.

Processing method is one of the criteria that divides tiles into several categories. Sanded or matte tiles go through a rough sanding and light polishing stage. Steps made of such material will not slip even in frost, snow and rain. This option is primarily chosen for outdoor stairs. Another good option for equipping stairs on the street is unpolished steps. Glazed tiles are a bit mirrored but also non-slippery. Serves as a good choice for outdoors and indoors alike. Polished tiles reflect light well, but also glide well. It requires an anti-slip pad for safe operation.

To make the right choice and buy everything you need to form complete, safe and beautiful steps, you need to know the complete set and purpose of each component:

• The tread has cuts and stripes, these are necessary to provide good grip on the shoe and reduce slipping. Some models have grooves for collecting and draining water, which is important for the porch.

• The riser is a wall that is installed vertically in relation to the treads. The main characteristic is height. This element is now available in a wide variety of colors and patterns. If desired, you can create a unique architectural composition.

• The skirting board is a corner piece. It gives the structure a complete look and makes the corner joints aesthetically pleasing.

The correct choice, although based on the information presented above, also requires adherence to the following tips and recommendations:

• Water absorption should be minimized. When choosing a tile, you can moisten it with water, it should spread over the surface and drain, leaving almost no trace.
• Outdoor steps should be faced with rough porcelain stoneware. It will not slip even in frost and heavy rainfall.
• When choosing tiles for outdoor work, you need to pay attention to the quality of the staining. If the dye completely fills the material, then the color will retain its intensity and brightness for the entire period of operation.
• Marching stairs require the use of straight slabs.For screw-type stair structures, beveled elements are required. Such material is difficult to find in free sale, more often you have to make an individual order. In addition, the editing process is more complicated, but the end result is beyond expectations.

• In houses and apartments, you can use glazed porcelain stoneware, it looks gorgeous, and is cheaper than other analogues. For rooms with a high floor load, choose polished, matt or unglazed material. The wear resistance and durability of these types of porcelain stoneware is higher.

• The separate leading edge profile makes possible step repairs easier and cheaper. In this case, it will be necessary to replace only one element, and not the entire tread.

• The height of the riser is an important parameter for choosing porcelain stoneware, which will largely determine the further work. If the height does not match the design parameters, then the risers will have to be cut. In this case, it is impractical to choose elements with a pattern; it is best to stay on a monochromatic version.

• Kapinos steps have rounded edges. Such a staircase is aesthetically pleasing, looks complete and fits more harmoniously into any interior.

Porcelain stoneware can be easily applied to the surface. There are no particular difficulties in this process. You will have to study the stages of work in detail and observe the subtleties that are used by professionals.

The work algorithm is as follows:

• The base for laying the material must be carefully prepared. Any irregularities must be repaired, chips and cracks must be filled. The preparation is completed by priming. It is imperative to apply a primer, it improves the ability of surfaces to adhere to each other.

• We compare the tiles and the prepared base. We make adjustments if necessary. A special machine must be used to trim the tiles. This is the only way to achieve a perfect edge without damaging the material. It will not be superfluous to check the packages for matching colors, shades and patterns.

• We prepare the adhesive composition according to the recommendations that the manufacturer must apply to the packaging. Usually the essence of this stage comes down to mixing the dry mixture with water using a mixer. The mixture should be infused, it takes about 10 minutes.

• Let's start laying the tiles. We will move from top to bottom so that we do not have to step on the laid, but not yet fixed tile. We start with the riser, then the front part follows. Using a notched trowel, the adhesive is applied to the substrate.

• The corner part of the steps requires the installation of a corner. It can be metal or plastic. A grout is required for grouting. Dirt from the tiles, which are obtained during the installation process, can be easily removed.

• To obtain beautiful joints, it is necessary to make the base on the same level with the tiles or slightly less.

• If the staircase is created outdoors, then the tile should be at an angle. Such a secret will provide a drain for the water. A drainage channel can be left on the side of the outer plates. In this case, moisture will not accumulate on the surface of the steps.

• It is much more difficult to install winder steps. The installation process involves trimming the tiles, which increases its consumption. The number of residues can be reduced, for this you need to clearly select the necessary modification and guess with the size, find out the area of ​​the future structure, carry out detailed calculations in which allowances for the seams will be taken into account.

• After laying, the seams are rubbed with a special compound. The remains are removed with a spatula and wiped off with a damp cloth.

Porcelain stoneware tiles are very easy to maintain, as in this case there are no special conditions and requirements. For cleaning, you can use any chemical that is commonly used for cleaning the house.

Monolithic porcelain stoneware is advisable to use in rooms with high traffic. It is for such options that the combination of porcelain stoneware and chrome elements is the most successful.

Soft sandy shades form the basis of this cozy and warm interior. The accent was created on the railings, which turned out to be expressive and eye-catching.

For information on how to lay porcelain stoneware on the stairs, see the next video.