Cutting porcelain stoneware: tool selection

Porcelain stoneware is a unique building material characterized by beauty and originality. The products are made from granite chips, which are pressed under high pressure. At the exit, an almost monolithic slab is obtained, which does not differ in structure from natural stone.

Cutting porcelain stoneware, the choice of tool for which is carried out depending on the place of use, is a complex procedure. Stone processing is carried out only with special mechanisms that are capable of destroying the material without cracking.

The structure of porcelain stoneware is monolithic. It is not always possible to break such bonds with an ordinary metal tool.

Today, several types of cutting are used to process this tile.

This process involves exposing porcelain stoneware to hand or power tools. Often, diamond-tipped products are used for such purposes. This type of cutting is the easiest and most popular. It is used almost everywhere. This is due to the availability and simplicity of the tool itself. Some types of mechanisms work only in conjunction with the water supply.

Wet cutting today is used quite often only in conjunction with professional equipment.

Dry processing is mainly used in everyday life, where a small amount of porcelain stoneware needs to be processed. The disadvantage of this approach is the release of a large amount of dust, which can settle in the lungs. Therefore, during such work, high-quality personal protective equipment should be used.

Mechanical cutting is a fairly simple process, which does not always allow you to get a high-quality cut. If you use poor quality tools, it can lead to the formation of chips or cracks.

This technology is carried out by a special device that delivers a stream of water and abrasive sand to the surface of the slab. Fine metal in the form of a powder can also be used as an abrasive. In this case, the mixture moves at a very high speed, which leads to the destruction of the material.

The water jet has a fairly small radius, which makes it possible to form a thin cut. Waterjet is one of the most difficult methods. Often, such devices are controlled by computers. This allows you to get a thread of almost any shape.

Another area of ​​use is mosaic imitation. For this, slots are cut out on a sheet of porcelain stoneware, but at the same time their depth reaches about half the thickness of the tile.

Another modern method of processing porcelain stoneware. Cutting is done with a stream of charged photons. They also come out in a directed thin beam from the generator. Getting on the surface of the tile, it begins to heat it, destroying the bonds of granite and adhesive. The advantage of this processing is its versatility and high speed.

The cut surface may in some cases be even better than after waterjet cutting.

Therefore, they are dealt with only by specialized companies that cut porcelain stoneware to order.

The processing of porcelain stoneware requires reliable and powerful equipment capable of destroying the monolithic structure of the material. The modern market today provides several types of tools that can be divided into such groups.

This structure consists of a special bed, rail guides and a cutting roller. Tile cutters are used relatively rarely. With it, you can get small, even cuts at the corners or along the slab. But curly cutting is not available to him.

The device is in many ways similar not to the previous modification. Only it is already equipped with an electric motor, which simplifies and speeds up the processing of porcelain stoneware.

The sander is a versatile tool that allows you to work with different types of materials. To be able to cut porcelain stoneware, it should be equipped with a special diamond disc. The device is quite easy to use, and also affordable for almost everyone. With the help of a grinder, you can get both smooth and curly cuts of small complexity. But the quality of processing depends on the operator himself.

Grinding machines are used when access to other tools is limited or simply not economically viable.

This is a kind of grinder, only the structure is completely fixed on a fixed frame. In order for the machine to be able to cut porcelain stoneware, it also needs to be supplemented with a diamond disc.

At the same time, the processing quality here is somewhat better than that of the grinder. Systems of this type are complemented by support platforms, which allow more precise control of the movement of the saw relative to the tile.

Someone hardly associates this tool with porcelain stoneware or tiles in general. But technically he can carry out cutting of this product. To do this, you need to insert a special diamond thread into the jigsaw. On its surface, just like on other products, there is a crumb of diamond dust. The jigsaw is a versatile tool. With it, you can get smooth or curly cuts. The disadvantage of such a tool is considered to be a low processing speed.

These mechanisms are distinguished by their complexity and high processing accuracy. In most cases, the working tool moves on a special bed under the control of a computer. To get a complex drawing, you should enter its layout in a special format. It is almost impossible to meet such machines in everyday life or on construction sites.

Cutting with a glass cutter is practically not used for porcelain stoneware. This is due to the fact that the material is very strong, and therefore, having destroyed only the top layer, you cannot easily break the sheet.But if the thickness of the product is relatively small, then you can quickly and efficiently get the desired piece of product with a glass cutter.

Therefore, it is important to pay attention to their type and quality, as they can be designed to solve different problems.

The cutting of porcelain stoneware is used only if it is laid on the floor or wall. Therefore, when choosing a tool or method of processing this material, several factors should be considered:

If you only need to organize a few slices, you can do this with a hand tool. The best option is also a grinder, which does not allow you to quickly cut porcelain stoneware into even tiles. Large volumes of tiles should only be processed with an electric tool.

Porcelain stoneware is produced in different thicknesses, which affect the strength of the material. Thick products can only be cut with electric tools, which quickly destroy the structure. There are no universal mechanisms for thin canvases. Only the cutting technology is important here.

There are several types on the market, and they differ in thickness and diameter.

This parameter is one of the most important. A straight line cut is capable of producing almost all types of tools that were previously considered. But if you need to get a curly element, then only a few devices can handle this. The simplest of them is considered to be an electric jigsaw. But it does not allow achieving high precision, as well as the complexity of the figures. It is used to cut small decorative elements in the form of a circle, petals, and so on.

Here you can also choose from several tools. Simple modifications, such as a circular saw or a grinder, produce small chips when cutting. If you use high-quality discs, then such defects can be minimized, but not completely eliminated.

They give the surface a smooth finish. Use a similar approach to create steps or tiles for decorative borders. You can also grind the ends using sandpaper of various grain sizes. But this method is not always relevant, especially if you need to process significant volumes.

The cutting technology of porcelain stoneware depends only on the tool that you will use.

Sawing floor tiles with a grinder involves performing several sequential operations:

1. Before starting work, the material should be fixed firmly on a flat surface. It can be a special bed or a wooden board. It is important that the product does not slip as it is dangerous and does not allow the operator to cut straight.
2. Cutting porcelain stoneware tiles should be done slowly, sequentially moving the grinder along the marked line. If a lot of dust is generated, you can water the cut with water. This will also lower the temperature of the saw slightly and extend the life of the saw.

Cutting material with an electric tile cutter is carried out using almost the same technology as processing with a grinder. Here, the tile is also fixed on the bed, but the thread is formed only at a shallow depth along the entire cutting line.After that, the product is taken out and simply broken.

When working with an electric jigsaw, you should adhere to these specific recommendations:

1. First of all, you should draw the contours along which the cutting will be performed. It is advisable to slightly moisten porcelain stoneware with a little water. After that, you need to slowly begin to destroy the tile, constantly monitoring the condition of the wire.
2. During work, it is advisable to blow off dust, which not only covers the marks, but also clogs the thread. This will make it possible to better control the operation of the movement of the working body.
3. If the thread reaches the end or edge, it is important to control the load on it. It is better to reduce the speed a little to keep the tool intact and also to get an even cut.

If you decide to use a circular saw for processing, then there are also several nuances here:

1. The tile should only fit on the bed. Cutting by weight is not permissible, as this will result in injury to hands or other organs.
2. The product should be moved along the previously marked line in the direction of movement of the disc. It is important that the disc goes into the material, not exits it. Otherwise, it will be difficult for you to hold the sheet, and the cut quality will be significantly reduced. In this case, you need to hold both sides strongly with your hands so as not to allow the material to slip out.

Try to follow all safety rules for working with circular saws.

For cutting, the material is simply inserted onto the bed and fixed with special clamps. After that, the rollers feed it to the knives, where they chamfer. It is quite difficult or almost impossible to get this at home. But you can try this with a grinder that can remove the ends.

It is almost possible to get a high-quality cut at home.

For these purposes, you should simply follow a few rules of experienced craftsmen:

• Cut porcelain stoneware only from the front side of the material. This minimizes the appearance of chips. If you perform this procedure the other way around, then when you exit the saw will simply tear the decorative layer and give it an ugly look.
• After cutting, it is advisable to process all ends with a professional grinder. This allows you to get rid of small chips that are not always needed on the surface of the product.
• It is necessary to cut correctly only with the application of little physical effort. Otherwise, it can lead to splitting of the material or the appearance of a large number of large chips.
• Use only quality saws and other cutting tools. This will not only allow you to cut more pieces, but also reduce the risk of cracks during operation.

• When there is a need to cut out a workpiece in the shape of the letter "L" from porcelain stoneware, then it is desirable to use elastic materials as a substrate. This base will prevent the product from cracking in the corner where the risk of cracking is highest.
• Hole shaping is best done with diamond crowns or special ballerinas. They allow you to get a hole with smooth edges and a precisely defined size. If you do not have this tool, then you can try to cut a hole with a grinder. But this approach requires skills in working with this tool.
• Be sure to wear protective clothing that minimizes exposure to dust or other unforeseen factors.

Cutting porcelain stoneware is a complex process that requires compliance with all the nuances of working with this material. Use only quality and serviceable tools when working with this product. Only in this way can you get a smooth and beautiful cut that will fit into the interior of the room.

You will learn how to properly cut kermogranite with a manual tile cutter from the following video.