Plasterboard wall alignment: process features

The problem of uneven and curved walls with many drops is not uncommon. You can correct such defects in various ways, but one of the simplest and fastest is the leveling of the walls with drywall sheets. This method of adjusting the wall base can be used both in an ordinary city apartment and in a private house. Let's take a closer look at the intricacies of working with drywall, and also consider in detail the features of the process of leveling surfaces using this material.

Many owners of private houses and apartments at least once in their lives faced the problem of uneven walls. Such defects cause many difficulties in the repair process. Many finishing materials cannot be applied to such floors, and they look completely unattractive.

Currently, there are many different ways to align a particular base. One of them is laying drywall sheets. Many people turn to this method of alignment, since gypsum panels are inexpensive and easy to install.

Such popularity and demand for drywall is also explained by its perfectly flat and smooth surface. Thanks to this feature, such a material is able to make even wavy surfaces of walls from a log house aesthetic and straight.

Installation of gypsum plasterboards cannot be called too difficult, so any home craftsman can handle it. The most difficult thing that you will have to face is the design of a high-quality and reliable frame on which the drywall panels will be attached. The durability and aesthetic appearance of the leveling layer depend on this component.

Frames are made from different materials, but the most common are metal and wood structures. Metal elements should be treated with anti-corrosion agents to avoid deterioration over time, and wooden parts should be well dried and undamaged (no signs of decay). Only if these requirements are met, the resulting design will serve for many years, without delivering the slightest problem to household members.

Drywall is quite often used in wall leveling.

Both the material itself and the corresponding method of finishing the floors have many positive qualities.

• First of all, it should be noted the quick and easy installation of leveling gypsum boards, especially when compared with other methods of adjusting floors.
• Drywall itself is perfectly flat, therefore it does not require special preparation after its installation. It does not need to be putty or sanded, which can significantly save time. Of course, the putty can be applied to the gypsum board sheets, but this process is not required. As a rule, it is referred to in the event that there are noticeable seams between the gypsum panels that need to be hidden.
• Many consumers turn to drywall wall alignment, as it is inexpensive. In terms of price, this finishing material outperforms more expensive plaster, which can also be used to eliminate irregularities.
• GKL sheets on the frame can be mounted on any base.

• When leveling walls with plasterboard, you will not encounter a lot of "wet" work. Thanks to this, it is possible to work with ceilings even after laying a fine floor covering.
• Between the drywall and the wall (in the case of the frame installation method), there are always free cavities that can be used for laying communications. In addition, insulation is often installed in these spaces.
• Drywall is a flexible material that is very easy to work with. After installing the gypsum sheets, you can decorate them to your liking - paste over with wallpaper, paint with paint, decorate with spectacular panels and other similar coatings.
• Aligning the floors with plasterboard sheets is absolutely safe. GKL is recognized as an environmentally friendly material, which contains no hazardous substances and harmful compounds, so it can be safely used in living space.

Due to its many benefits, drywall wall alignment is insanely popular.

Everything has its weaknesses, and this method is no exception.

• Drywall is a fairly fragile material, especially when compared to reliable cement plaster. This disadvantage causes some difficulties in the process of installing the panels, since they can be easily damaged.
• When using plasterboard coatings on the walls, problems may arise with the fastening of hanging pieces of furniture, as well as the installation of switches and sockets. Remember: heavy elements cannot be installed on such surfaces, since the gypsum board is not designed for heavy loads.
• The rough walls in the dwelling must be absolutely dry. In addition, if they turn out to be less vapor permeable than drywall sheets, then moisture can begin to accumulate in the free cavity. Because of this, mold or mildew forms on the walls. Such defects will shorten the life of the drywall and damage its appearance.
• Plasterboard is not recommended for installation in rooms with high humidity levels.

Plasterboard sheets can be used to level walls in a wide variety of living spaces. This can be not only a dry living room or bedroom, but also rooms with a high level of humidity - a bathroom or toilet.

For the latter rooms, it is recommended to choose a high quality waterproof drywall. This material can be used in rooms with high humidity levels. Substrates like these are the perfect solution for laying tiles on top of them.

For the kitchen, you can use moisture-resistant and fireproof drywall. These types of GKL sheets are among the most durable and safe. They can also be used for gluing tiles, which are often used in the design of dining rooms and kitchens.

Plasterboard sheets are optimal coatings for leveling walls in a wooden house or a log building. Thanks to these finishing materials, you can achieve perfect symmetry of the space. However, it is worth considering that even after complete shrinkage, wooden walls undergo periodic expansion, absorbing moisture, then they lose it, drying out. Because of this, the highest height that plasterboard floors can be designed for should be about 6 m.If you do not take into account such features of wooden structures and simply install the frame on the walls, this will lead to cracking of the joints between the gypsum panels, even if the installation mesh is installed.

In log houses, drywall is a real lifeline. Before proceeding with the installation of drywall, the walls in such dwellings must be treated with antiseptic compounds. Only after these substances have completely dried can you proceed to the direct installation of the leveling elements. In such cases, you can use chipboard boards, and already attach drywall to them.

Often people who have adobe houses turn to leveling the walls with drywall. These buildings are very warm. They are a kind of composites and are built from materials such as clay, earth, straw and sand. Of course, with such raw materials, there is no need to talk about perfectly flat walls. That is why the floors in these clay houses simply need to be leveled with various materials, and drywall is ideal for such tasks.

You can do the alignment of the walls with drywall on your own, without involving specialists. When starting such work, it should be borne in mind that a high-quality installation will be the key to the durability and aesthetics of the floors in the house, so it should be taken seriously.

There are only two ways to dry wall leveling.

• On the frame... This option for installing gypsum boards is used most often, although it is more laborious due to the preparation of a high-quality frame. It is assembled from metal or aluminum profiles or wood.
• With glue... It is easier to fix drywall on a wall base using a special construction glue.

Both installation options can be done by hand. Let's take a closer look at the step-by-step instructions that reveal all the stages of these installation methods.

With this method of installation, drywall sheets are fixed on a frame made of metal or wood. Most often, people use metal structures, as they are unpretentious and more durable. They do not need to be cared for regularly, such as wood products that rot and dry out.

Frames are pre-fixed to the wall that needs alignment. If the structure is made of wood, be sure to make sure that it is completely dry and does not have any signs of decay on the surface. Otherwise, in the process of moisture release from the material, the entire structure may deform, as well as lose its visual appeal.

To create a high-quality frame, you need to use rack and guide profiles. The latter are necessary to determine the contour of the resulting structure. To do this, they must be attached to the ceiling and floor (parallel to each other). As a rule, they first fix the parts on the ceiling, and then use a plumb line to measure out the place for the floor profile. After that, the guides are connected to each other by rack elements, which should be fastened to self-tapping screws. Do not forget to maintain a distance of 40-60 cm between them.

To make the frame more durable and wear-resistant, you can additionally install suspensions in the structure, and attach rack profiles to them. Maintain a step of 30-50 cm between them.

Installing drywall on a finished frame is quite easy. GKL must be attached to the structure using rough screws. Similar fasteners are made of a special oxidized metal. Their number directly depends on the size of the drywall sheet. For example, for a standard blade with dimensions of 2.5x1.2 m, you will need about 100 self-tapping screws.

When screwing in self-tapping screws, be as careful and accurate as possibleotherwise you risk ruining the drywall by damaging it. The hats should always be slightly sunk into the drywall itself, but do not press too hard.

Thanks to the frame installation method, you can insulate the room, if necessary. In the cavity left between the wall and drywall, it will be possible to place an insulating layer. Most often, consumers choose popular mineral wool or glass wool for this. However, it should be borne in mind that all components must be as close to each other as possible so that there are no gaps between the mats. Such materials are not only heat-insulating, but also sound-insulating.

The last step in creating frame smooth walls is to putty them. It is especially important to putty the areas where self-tapping caps and ugly joints between drywall sheets remain.

Before starting to putty the joints, you need to stick a special mesh tape on them - serpyanka. This part is necessary for better and more reliable adhesion of the putty to drywall. After applying serpyanka, the surface of the sheets is covered with primer, and then putty. In this way, the tape is pressed into the first layer of trim, and then another layer of the mixture is applied to it.

The frameless installation of plasterboard leveling sheets is easier. It is ideal for novice craftsmen who do not have sufficient experience in such work.

With this installation, drywall sheets are fixed with special glue. Such an adhesive is quite common and is found in many hardware stores.

Before proceeding with the installation of drywall on the walls, they must be prepared. First you need to free the rough base from the old finishing material, as well as dust and dirt. After that, the evenness of the floors should be measured. If this indicator is in the range of 4-7 mm, then the adhesive must be smeared over the entire area of ​​the drywall, smearing with a notched trowel. After that, the sheets can be glued to the base. If the curvature of the walls reaches 20 mm, the glue should be applied in sections in the form of separate portions. In this case, it is necessary to maintain small intervals.

However, there are times when the curvature of the walls exceeds 20 mm. In such cases, the floors must first be leveled with plaster, and only then the plasterboard panels must be glued.

When you have removed old finishing materials and dirt from the floors, they must be well primed. Keep in mind that when combining work on plastering the surface with both dry and wet methods, you need to start with wet processing, and after it is completely dry, go to dry.

Then you need to prepare the adhesive for work. How to dilute it, as a rule, is indicated on the package. Try to strictly adhere to the instructions provided, otherwise the composition may lose its beneficial properties and become useless. A properly prepared glue should have a thick, curd-like consistency. Do not immediately knead a large volume, as the mixture will dry completely after half an hour, and then it will no longer be possible to use it.

An uncomplicated algorithm by which the leveling of plasterboard ceilings takes place in a frameless method.

• On the places where it is planned to stick the gypsum board sheet, it is necessary to apply a pre-prepared glue.
• Then the drywall sheet should be unrolled with the back side and portions of glue should be applied to it, maintaining small intervals. Most often, the adhesive is laid out only around the perimeter of the plate, but for greater reliability, several adhesive spots should be applied in the middle of the sheet.
• The drywall should now be lifted and lightly pressed against the wall. Do not press too hard on the material, otherwise you risk breaking it.
• Using a rubber hammer and a builder's level, flatten the sheet and press it against the base.
• The remaining drywall sheets should be attached to the base in a similar manner. However, do not forget about checking the joints between the parts.

Based on this algorithm, we can conclude: frameless wall alignment is quite simple, although many experts argue that it is more difficult than wireframe. The choice of the optimal installation method remains only for the owners of the home.

If you are determined to align the walls in the room yourself, you should rely on some advice from experienced craftsmen.

• Pay attention to the quality of the purchased materials. Do not look for too cheap products in stores, as they may be of poor quality. High-quality designs will cost more, but they will serve faithfully for many years without causing problems.
• Select drywall according to the conditions in which it will be located. In rooms with high humidity (bathroom, kitchen, toilet), special moisture-resistant panels should be installed. Ordinary sheets are cheaper, but in such conditions they quickly deform and collapse.
• If a frameless installation method is chosen, you should take care of the selection of a suitable glue in advance. The reliability and durability of the resulting finish will depend on the quality of the adhesive mixture. It is necessary to dilute this composition, carefully following the instructions on the package.
• Make sure that during the installation process, the joints between the drywall sheets pass strictly in the middle of the vertical profile.

• Despite the fact that the frame method of installing drywall does not provide for special preparation of rough floors, they should still be treated with soil with antiseptic components in the composition.
• After installation on drywall sheets, protruding caps from self-tapping screws often remain. It will be most convenient to putty them with a narrow spatula.
• When fixing drywall sheets with glue, take into account the drying time. As a rule, this takes 30-40 minutes (depending on the composition of the glue).
• When installing drywall on the frame, try to leave distances between the screws not exceeding 30 cm.The ideal distance between the two mounts is 12-20 cm.
• During the installation process, it is recommended to lay special gaskets with a thickness of 10-15 mm between the floor and the sheet, as well as the ceiling and drywall. They are necessary so that the gypsum board can expand freely if the temperature or humidity level changes in the room.

For the secrets of installing drywall, see the next video.