All about Matelux glass

Matelux glass pleasantly amazes with its thinnest line between protection from prying and unwanted eyes and the proper ability to transmit light due to the uniform frosted layer and the effect of a light and unobtrusive diffused light. The designer body willingly uses these qualities of various matte finishes in their creative projects to the delight of sophisticated consumers.

Matelux glass ("satin" or satin) belongs to the category of float glass - polished sheet materials produced by the float method. In the course of production, a special chemical treatment takes place with the help of a chemical solution. The operation carried out does not change the mechanical, thermal and other qualities of the source.

Let's list some of the topical properties of "satin".

• By moisture resistance. If water gets on the glass, the matte effect of matting is somewhat reduced, but insignificantly. With the complete evaporation of moisture from the glass, it completely returns to its original qualities.
• In terms of heat resistance, the product is fully adequate to the parameters of a typical polished glass.
• According to the degree of resistance to ultraviolet radiation, "satin" fully withstands their impact, as well as artificial light.
• For fastening and installation. The material fully provides the level of lightness, simplicity and safety during installation.
• In terms of fire resistance, matted products belong to non-combustible materials (class A1).
• By the degree of bending moment strength. Has the same properties as standard products (GOST 32281.3-2013, EN 1288-3).
• The material is absolutely environmentally friendly.

There are quite a few advantages of frosted glass.

• The matte product softens the reflection and diffusion of light in the room, creating a pleasing aesthetic appearance.
• Has an excellent degree of light transmission (about 90%).
• Allows you to make completely original creative solutions for the decoration of countertops and various fragments in kitchens.
• Matelux glass manufacturing technology is subject to the strictest quality control. Its uniform appearance is maintained over a wide size range and requires close attention.
• Possesses a high degree of immunity to stains and prints. This makes it easy to clean and maintain.
• A special collection of frosted glass types demonstrates the broadest possibilities of its use in terms of designing interior design ideas and facade use options.
• A wide variety of uses and processing possibilities in terms of hardening, laminating, insulating glass and more.
• Available in a wide variety of dimensional standards, it is widely used in many architectural innovation endeavors.

There are basic types of "satin". Let's list them.

• Matte, with light matting and double-sided.

• Glasses based on Optiwhite glass (coated glass).

• "Satin" based on reflective Stopsol glass, when one side of the polished material is covered with a mirror layer, and the other is matted.In case of rain, such glass becomes mirror-like and shiny, and in sunny weather a light metallic tone appears (important for double-glazed windows).

Can be found:

• patterned matte and corrugated glasses used in the design of the wardrobe;

• silk-screened glass widely used in furniture design;

• acrylic glasses for furniture production.

The latest collections include:

• clear - based on blanks of the greatest neutrality (high aesthetics);

• crystalvision ("crystal") - based on standard polished blanks with neutral shades;

• bronze (bronze) - based on tinted glass blanks with shades of bronze;

• gray (gray) - on the basis of tinted glass in gray tones.

Many other varieties of “satin” are also popular: “grace”, “light”, white glass, “mirror”, “graphite” and others. Tempered glass is also produced by technological standards. The satin color is varied, and any designer can choose exactly what suits him for the interior.

Satin glass is used:

• for furniture - glazing of shower cabins, covering of tables and shelves, for wardrobes (with diamond engraving), kitchen facades, countertops;
• for bulkheads inside and outside;
• for standard and sliding doors;
• in retail stores - in showcases, glass stands for trade, shelves, racks;
• in the facade fragments of offices and residential buildings in a set of packages, in the glazing of doorways, balcony structures, shop windows and much more.

"Satinat" resists the formation of defects and scratches. It is easy to care for and clean using proper and reputable products. However, the material requires protection from contamination.

• It is washed in washing machines according to the factory recommendations with pure demineralized water.
• Wet care of the glass should be carried out over its entire plane; cleaning with fragments is not recommended. This way, scratches are avoided.
• When removing grease stains with proper cleaning agents, apply them to the entire surface and clean with a soft, lint-free cotton cloth or paper towels. Excessive efforts should not be applied, otherwise damage the product. We clean the product dry in a similar manner until the funds are completely removed. The more evenly the satin is moistened, the less likely it is for dirt to stick. If the spots appear again, then the procedure is repeated.
• When sanding material by hand, large volumes of deionized water are used for flushing.
• It is recommended to clean heavily soiled glasses using pressurized water (Kärcher) with a temperature of at least 30 ° C.
• Do not use abrasive materials, alkalis, sharp objects and hard sponges when cleaning.
• Defects of matt layers from silicone or similar items cannot be repaired. The best method for cleaning matte surfaces from similar substances is a regular school eraser or objects made from a similar material.
• For cleaning, it is also recommended to use alcohol-containing substances, for example, an alcohol-based glass cleaner Clin.

The abbreviated list of substances whose contact with "satinat" must be excluded includes:

• silicone adhesives;
• aggressive compositions - lime, soda, cement and others;
• paints and varnishes;
• excessive dustiness;
• when handling, it is important to monitor the environment.

And a few more recommendations.

• Cut "satin" on the polished side. It's safer and more convenient. The cutting surface is covered with a felt pad and periodically swept as necessary. Felt needs to be changed from time to time.
• When finishing cutting, all particles are immediately removed from the glass.
• When storing glass, it is necessary to use pads that do not include sticky, solid particles and moisture.
• The shelf life of the material should be reduced to a minimum. Storage is allowed no more than 4 months from the date of delivery.
• The “satin” should be stored upright with a maximum angle of inclination up to 15 °. The storage location is recommended to be dry and ventilated. But a simple canopy will not work, since sharp temperature changes cannot be allowed. Storing frosted material in damp conditions will result in staining or iridescent streaks that are highly visible and difficult to remove.
• The best storage conditions are in a closed, dry room at a temperature of 20-25 ° C, away from heating devices. Desired air humidity is up to 70%.
• If you notice wet manifestations on the container or glass, then immediately refuse to buy such a product. Raw glass from the warehouse is recyclable.