All about carports with a utility block

A carport along with a utility block is a good alternative to a garage. The car is easily accessible - sat down and drove off. And tools for repairs, winter tires, a can of gasoline can be identified in a nearby outbuilding.

Hozblok is called a small room for household needs. The structure can have universal or specific purpose. The building has a workshop, shower, storage for garden tools and other things. If the utility unit is built for the car, then it is logical to keep the tools for its maintenance in it. Many people think that it is still better - a garage or a visor with a utility block. If you look at the topic in more detail, you can find your own features near the awnings, note the pros and cons.

Let's try to determine the merits.

1. First of all, the visor protects the car from the sun and bad weather conditions.
2. To build a canopy, even with a utility block, you do not need to document it, make a project, take a building permit, put it on a cadastral record, since it is built on a light foundation and is capable of quick dismantling.
3. Building a shed with a utility block will be cheaper than building a major garage. In addition, most of the work can be done by hand.
4. The visor is easy to use, as it allows you to quickly use the car.
5. A canopy can become a decoration of the local area if it is made aesthetically interesting, for example, in an arched way and covered with a material that matches the roof of the house.

The disadvantages of an open canopy include the following points.

1. It will not protect against frost, slanting rain and theft.
2. The absence of a garage pit will not allow in-depth car repairs.

A place for a carport is chosen near the gate, but away from the active zone of domestic inhabitants. The site is asphalted or covered with tiles. A parking lot with a utility block can be built under one roof.

The frame, supports and roof are erected from different materials. For supports use metal piles, bricks, stone, concrete pillars, wooden beams. For frame and walls the following types of materials may be needed.

Supports and a frame of walls for cladding are made of metal. After concreting the iron supports, a frame is made of profiled pipes. To connect them together, you need a welding machine. Metal is protected from corrosion with a special coating.

They resort to this type of materials if they want to make a solid capital outbuilding. Unlike metal piles, which can withstand any load, the pressure on the supports of concrete and brick structures must be calculated correctly. A building erected of brick or stone does not require additional finishing. Its appearance will always be expensive and beautiful. And for concrete walls, finishing is necessary. They can be plastered or sheathed with siding.

Beams and boards treated with an antifungal agent are used for wall cladding, sometimes they are also used for roofing. Wooden buildings look very organic against the green background of the garden.

This material is most often used to cover canopies. It transmits light well and is 100 times stronger than glass. Polycarbonate has a different structure and color, it is plastic and is able to form an arched roof.

Glass is rarely used for visors; it is necessary in the following cases:

• if the canopy is located above the windows of an outbuilding and can give a shadow to the room;
• when the design solution requires a transparent visor to support the rest of the buildings on the site;
• if an original modern building is being created.

Before proceeding with the construction of an outbuilding with a canopy, make up blueprints, make calculations and make an estimate for the purchase of materials. The size of the carport depends on the possibilities of the territory and the number of cars planned for placement. The parking lot can be arranged for one, two or three cars.

But sometimes the roof is made in several levels, the roofing material is used in the same way. If the canopy is attached to a finished building, different types of materials can be used, for example, the utility unit is covered with slate, and the visor is made of transparent polycarbonate. The construction project is not difficult to complete on your own, but you can find a suitable scheme on the Internet. We offer several drawings for the construction of a change house with a parking lot.

it large building with a total area of ​​6x9 sq.m. The two-room utility block has dimensions of 3x6 m, and the square shed covers an area of ​​6x6 m. The building houses a workshop (3.5x3 m) and a generator room (2.5x3 m). The canopy is attached to the back wall of the building and is a stand-alone structure. To get from the workshop to the parking lot, you should go around the building from the side.

More compact building, designed for parking for one car, occupies a total area of ​​4.5x5.2 sq.m. Of these, 3.4x4.5 sq.m. is planned for the construction of a shed and 1.8x4.5 sq.m. assigned to the economic part. The entrance to the premises is carried out from the side of the parking lot, which is very convenient if the entire arsenal of things for servicing the car is in the utility block. The general structure has a single roof and is made of the same materials.

At the dacha or in a country house, it is quite possible to build a small room for household needs without outside help and supplement it with a canopy. First you need choose a place, the entrance to which will not create problems for others. Before construction should be to clear and level the site, prepare drawings, purchase materials.

For a small building with a canopy you will need columnar foundation... To erect it, it is necessary, according to the sketches, to make markings on the ground using stakes with a rope. In the places marked for the pillars of the foundation and the support of the canopy, they make 60-80 cm depressions with the help of a drill or a shovel. Sand and crushed stone are poured at the bottom of each pit, then the pillars are installed, leveled and poured with concrete.

After waiting a few days until the foundation dries out, you can proceed to erection of walls. To begin with, they make a strapping along the foundation and form the floor. To do this, install logs, fill the gaps between them with expanded clay, cover the surface with a rough board. For the construction of walls, various types of materials are used: foam concrete, brick, sandwich panels, boards, corrugated board.

When the walls are erected, with the help of beams, they make the upper harness, on which the rafters are installed. Then the sheathing is created and the roofing material is laid. It can be roofing material, bituminous tiles, slate, ondulin, corrugated board, polycarbonate. The roof covering is installed with an overlap to protect the building from precipitation. Only in the case of polycarbonate, a gap is left between the sheets.

Upon completion of the roofing work, proceed to the outer casing of the block and to its interior decoration... The outside of the building can be sheathed sidingflat slate or cement-bonded particle boards (DSP). Interior decoration is often performed clapboard or OSB plates.

Hozbloks can be beautiful in their own way, we suggest you this with examples of ready-made buildings.

• A canopy with slatted walls.

• Outbuilding with garage and shed.

• A beautiful structure with a two-level roof.

• Modern style canopy.

• Unusual structure including a utility block and a shed.

For an overview of the carport with a utility block for a car, see the video below.