Headphone sync methods

Recently, wireless Bluetooth headphones have become very popular. This stylish and convenient accessory has practically no drawbacks. Sometimes the problem with using these headphones is just their synchronization. In order for the accessory to work smoothly, some nuances must be taken into account when setting up.

Before you can sync your headset, you need to determine the operating system of your device. In most cases, this is iOS or Android.

For the Android operating system, the sequence of steps will be as follows:

• Bluetooth is turned on first on the headphones themselves, and then on the device;
• then select the appropriate headset from the list of detected devices.

With the iOS operating system (Apple gadgets), you can pair them in the following way:

• in the device settings, you must activate the Bluetooth function;
• then bring the headphones into working condition;
• when they appear in the list of available headsets, select the appropriate "ears".

When connecting a Bluetooth headset, users often wonder if only one earphone can work. Indeed, some manufacturers of such devices have added this capability. The synchronization procedure in this case will be exactly the same. But there is an important nuance - only the lead earpiece can work separately (in most cases, it is indicated). The slave works only in tandem.

If you have any problems during the operation of the headphones, you can restore them by resetting the settings to the factory settings. It will also help if the headphones are planned to be sold or donated to another user.

For to return Bluetooth headphones to factory settings, you must first remove them from the device on which they were used... So, you need to go to the phone menu and in the Bluetooth settings click on the "Forget device" tab.

After that, you need to simultaneously hold down the buttons on both headphones for about 5-6 seconds. In response, they should signal by showing red lights, and then turn off completely.

Then you need to re-press the buttons at the same time only for 10-15 seconds. They will turn on with a characteristic sound. You do not need to release the buttons. It is recommended to wait for the double beep. We can assume that the factory reset was successful.

After a factory reset, the headphones can be re-synced to any device. They are conjugated quite simply, the main thing is to take into account some of the nuances.

In order for both "ears" to work in the desired mode, you must perform the following steps:

• on one of the headphones, you need to press the on / off button - the fact that the earphone has turned on can be judged by the light indicator that appears (it will blink);
• then the same must be done with the second earpiece;
• switch them between each other by double-clicking - if everything is done correctly, then another light signal will appear, and then it will disappear.

You can assume that the headset is completely ready for use. The synchronization procedure is quite simple and does not take much time if done correctly and without haste.

Synchronization of wireless headphones via Bluetooth in the video below.