How to make wireless headphones?

Are you familiar with the situation when, leaving the house with a twitching eye, you again have to untangle the wires from the headphones? It seemed to be neatly folded for later use, but it was as if someone had deliberately snuck into the bag and confused them again. The manufacturers of the legendary "apple" solved this problem and invented a wireless headset, and this simplified the life of many music lovers.

Wireless headphones have become not only a fashion nowadays, but first of all, convenience, which is important. Stylish wireless headphone case designs in the shape of an avocado or your favorite childhood cartoon character give you a smile and stand out from the rest. Every day, people from all over the world listen to music, enjoying a comfortable sound, praising a famous brand.

Unfortunately, not everyone is willing to pay a ton of money for such a luxury. But making a wireless headset with your own hands is quite possible.

In order to build a wireless fashion accessory from an ordinary wired device, you need to have:

• wired headphones;
• Bluetooth adapter;
• charger (for charging the battery).

Wired headphones can be purchased at a hardware store. Bluetooth has the form of a USB flash drive with a 3.5 mm jack socket. Portable chargers come in various types and sizes, but for this purpose you will need the smallest one, it will be enough to fully charge the battery.

The entire listed list will not hit your pocket hard, since the cost of these products is small. The price of Power Bank is on average 200-300 rubles, you can find more expensive and better quality, but the budget will be enough. In addition, if the battery runs out in it, it will not be safe to send it to a container with trash and purchase another.

A Bluetooth adapter from a Chinese site costs less than 150-200 rubles. A headset for listening to music can also be found on the site with Chinese goods.

When all the necessary inventory is assembled, you can start homemade assembly of the device at home. Insert the portable charger into the Bluetooth adapter.

Next, connect the plug from the headphones to the adapter headset, and in the phone settings, activate the Bluetooth function. In the list of found devices, find your adapter and connect to it, in case of a request to enter a password code, you can write the standard "0000" or "1111".

However, that was all that was required. Of course, the wires will still remain, since this is the main mechanism in such a device... The wires send the signal to the board inside the headphones and the sound is reproduced. The cords can be wrapped around the adapter or the earphone itself, and they will definitely not interfere.

This method is convenient when the headset connector is broken - you can do without it, since you no longer need to connect headphones to the phone. One more plus such an accessory in listening to music within a radius of ten meters from the phone, that is, you no longer need to carry it with you in your hand and around the house... When you go outside the radius, the music will stop playing or be choppy. When you enter the pairing range again, the music will play again.

You can buy a special case for these headphones, and they will be easy to find among other items.

On the Internet, many sites pay attention to ways to create wireless headphones on your own, you just need to choose the option that suits you.

There is another alternative to making a wireless accessory at home. This option is not as easy as the previous one, but if your arms are growing in the right direction, then everything is quite possible. To do this, you need to be patient and use the following materials:

• wired headphones (absolutely suitable for any company);
• Bluetooth adapter;
• soldering iron.

Disassemble your Bluetooth headphones and headset in any convenient way. Everything needs to be done very carefully so as not to touch the sealed wiring and spare parts nearby..

Pull out the board responsible for transmitting information from Bluetooth, check the volume control, it must be turned on. Solder the Bluetooth chip inside the headphone shell with a soldering iron.

Be careful when working with the soldering iron and the board. Also consider the presence of an input for charging the battery at the external input. The charger should be connected without problems so that nearby parts do not interfere.

Activate Bluetooth on your smartphone in the same way and find the required device for pairing. If you are asked for a special code, enter it and click "connect" or "done". If the device was not found, most likely you will have to contact a mobile technician, since the Bluetooth on the smartphone is in an inadequate state and requires repair.

When the device is working, turn on the music on your smartphone and enjoy listening.

In the modern world, headphones for any of us have a very important role, and it is important that their operation does not cause any trouble to the user. Every day, various companies offer new alternatives for creating equipment and components for easy use by customers.

When all of the above points are completed, there is little left to do - check the device for serviceability.

One of the easiest ways to check if a device is working is to turn on Bluetooth.... If these two devices are paired, then you can enjoy the wonderful songs of your favorite artists for a long time.

To "extend the life" of your headphones:

• do not pull on the cable when turning off or connecting the accessory;
• wipe dirt inside the sink only with a dry cloth or cotton swab;
• store your mobile headset in a dry place;
• Wear the earbuds in the case to prevent other objects from scratching or damaging the shell.

Make sure that the battery is always charged, this is very important for the smooth operation of the device. Also, do not forget about the simple rules for caring for the equipment, and then it will serve you for more than one year.

Here's how easy it is to turn wired headphones into wireless ones.