Unis tile adhesive: characteristics and consumption

When working with tiles, it is important to choose the right solution for which the material will be attached to the wall. Few people choose a cement-sand mixture due to the inconveniences that arise during the installation process: tiles slipping, various unpleasant sounds when working with such a solution. Special adhesives for tiles are now popular, which have a number of advantages over DSP.

When choosing a dry mix, you need to know in what conditions the work will be done, and how the tiles will be used. The properties that must be given to the glue depend on this, respectively, the manufacturers calculate the proportions of all ingredients. Thanks to this, various types of adhesives are created, designed for a specific range of work and conditions.

Unis is a Russian manufacturer of various dry mixes. He has been presenting his products in all major stores for over two decades. Used when working with ceramic or tile.

It can also be used when working with a stone, but there are limitations:

• Weight should not exceed one centner per 1 sq. m.
• The area of ​​the slab should not exceed 0.35 sq. m.

Most often, this adhesive is used when working in rooms with medium to high humidity, so it can be used when working with tiles in the bathroom. When considering the characteristics, it can be seen that the adhesive can withstand significant temperature fluctuations. When kneading, the solution can be used for three hours, however, it is best to lay the tiles in the first 20-25 minutes, then 10 is to adjust the position. From this position, Unis glue is not inferior to the best analogues.

The resulting solutions provide high adhesion of the tile to the surface. Also, the mixtures can be used in those rooms where there are warm water floors. The main property of the solution is its plasticity, which creates ease of use. When solidified, strength appears and the ability to withstand low temperatures and high humidity.

The composition is applicable on such grounds as:

• Gypsum.
• Brick.
• Cement.
• Concrete.
• Asphalt.

There is a wide variety of adhesives for different jobs. Here are the most common ones.

Refers to the universal types of tile adhesive. Strong adhesive for laying ceramic tiles, provides high adhesion. Suitable for work both indoors and outdoors. Laying on a base with underfloor heating system is possible.

Main characteristics:

• The required dosage is 1 part water to 5 parts of the mixture.
• Working layer - 3-15 mm.
• Working time is about 20 minutes.
• Correction time is from 5 to 8 minutes.
• Operated at temperatures from -50 to +65.

Suitable for porcelain stoneware and tiles. It is used when laying tiles on any horizontal and vertical surfaces. The main feature is the ability to level irregularities up to 1 cm during work.

Specifications:

• The required dosage is 1 part of water for 5-5.5 parts of the mixture.
• Working layer - from 5 to 15 mm.
• Working time - 10 minutes.
• Correction time is 7-10 minutes.
• Withstands weight up to 75 kg per sq. m.
• Operated at temperatures from -50 to + 55.

It is used in those rooms that often freeze through and in which there is high humidity. The mixture is only suitable for interior work and work with standard tiles.

Specifications:

• The required dosage is 1 part of water for 4-5 parts of the mixture.
• Working layer - from 2 to 12 mm.
• Working time is 12-15 minutes.
• The adjustment time is 10 minutes.
• Operated at temperatures from -50 to + 50.

Used when working with complex bases. Laying can be done with the "top down" method. Has a longer mortar life. Suitable for children and medical institutions.

Specifications:

• The required dosage is 1 part of water for 4-5.5 parts of the mixture.
• Working layer - from 3 to 15 mm.
• The solution has a pot life of about 5 hours.
• Working time is 20-30 minutes.
• Correction time is 15-20 minutes.
• Withstands weight up to 50 kg per sq. m.

It is used when working with slabs made of natural stone, which are of great weight. Adhesion of the glue is much higher than that of other types.

Specifications:

• The required dosage is 1 part of water for 4.2-5.2 parts of the mixture.
• Working layer - from 4 to 10 mm.
• Working time is 10-15 minutes.
• Correction time is 7-10 minutes.
• Withstands weight up to 110 kg per sq. m.

Eunice Belfix is ​​designed to work with complex types of tiles. Frost resistant and elastic. Due to its white color, it is suitable for grouting.

Specifications:

• The required dosage is 1 part of water for 4.5-5 parts of the mixture.
• Working layer - from 3 to 10 mm.
• Working time - 15 minutes.
• Correction time - 15 minutes.
• Withstands weight up to 80 kg per sq. m.

Unis Fix is ​​a weak adhesive and is the cheapest in the Unis range of dry mixes. Suitable for working with ordinary tiles. It is black.

Specifications:

• The required dosage is 1 part of water for 5.5-6 parts of the mixture.
• Working layer - 3-15 mm.
• Working time - 10 minutes.
• Correction time is 5-7 minutes.
• Withstands weight up to 30 kg per sq. m.

Eunice Pool is designed for work in pools or other reservoirs.

Buyers pay attention to the high quality of the mixtures. Often Internet users write that only their own mistakes and misunderstanding of the instructions lead to defects in installation. The correct choice of glue is the key to success, according to all users, which leaves feedback on Unis products.

How to use the Unis brand adhesive correctly can be found in the video below.