How to scrub grout from tiles?

Often, after repairs, stains from various solutions remain on the surface of finishing materials. This problem occurs especially often when using grout for processing joints. The composition quickly hardens, and it can be difficult to remove it, since resorting to rough mechanical methods is not the best solution. In this case, it is important to know a few simple ways to clean this type of contamination.

Basically, the seams are rubbed after laying the tiles. Most often, this finishing material is used for the kitchen, bathroom or toilet, that is, places with high humidity. Modern manufacturers produce tiles that do not require much maintenance. The main thing is to regularly wipe its surface.

After repairs, grout often remains on the material itself. Getting rid of frozen solution stains is quite problematic. Things are a little simpler with a fresh composition, which can be easily washed off without resorting to radical methods.

When removing the fugue from the surface, you should not make excessive efforts, as this can ruin the appearance of the tile and even violate its integrity. Today, there are many special tools that allow you to quickly and without negative consequences remove grout from tiles, without leaving traces. However, an incorrectly selected composition can also spoil the material. Therefore, an important point is the timely removal of grout even at the stage of laying the tiles.

The jointing joint dries up rather quickly. This may take from 12 to 20 minutes, depending on the quality of the solution and compliance with the application technology. Therefore, the fugue that has fallen on the tile must be washed as quickly as possible.

It is especially difficult to clean surfaces with a rough and porous structure, since sudden movements can easily damage the material. In this case, it is better to remove the mixture during the processing of the joints between the tiles. In this case, wipe off the dirt as carefully as possible so as not to spoil the treated gaps between the finishing elements.

You can wipe the grout off the cladding in two steps. The first stage is dry cleaning, which is carried out after fixing a small area of ​​the veneer. A special float is used to wipe the finished surfaces. Movements must be carried out diagonally to the seams. In this way, damage to the building joint that has not yet hardened can be prevented.

To cope with the remnants of the building mixture on the tiles, you can use special household products, which contain acid. These are highly active solutions and various powders based on the specified component. It is worth noting that products containing organic acids are ideal for removing other contaminants after repairs.

Compounds with acid quickly remove stains from glue, primer solutions. This category also includes traces of grout (even colored), which quickly solidify on the tile. Also, special tools give the treated gaps between the tiles a uniform look.

Particular attention should be paid to liquid formulations and gel cleaners. According to many experts, they are the ideal choice for cleaning all types of surfaces. The principle of action of these compounds is to create a fast reaction that softens the building mixture.

When it comes to powder options, they should be used with caution.

They can be especially dangerous for:

• marble tiles;
• granite finishes;
• materials from marble chips.

When choosing household compounds for removing stains from tiles, you need to take into account the fact that they all differ from each other in different percentages of acid. Also, in many variants, flavors and other components are present. Carefully study the composition before buying, because an incorrectly selected product can ruin the finish.

If you decide to clean your tiles using professional methods, be sure to follow the instructions provided by the manufacturer. As far as aids are concerned, it is also better to use soft sponges to remove old and dried fugue. Please note that no metal objects or brushes with stiff bristles should be used to clean ceramic tiles, as they can scratch the material.

If you decide to abandon the use of special tools, you can turn to effective folk methods. Ordinary citric acid will help in removing the building composition from the surface after it dries.

Often, a mixture in the form of a paste is also used to wash out dried grout.which includes baking soda and vinegar. The components are mixed in equal proportions and the contaminated areas are treated with the ready-made composition.

The product is applied to the stain and left to act for a few minutes. After that, the paste is removed with a soft sponge or brush.

You can also erase the frozen fugue with simple baking soda. To begin with, the cladding must be slightly moistened using a spray bottle filled with water or a damp cloth. After that, a small amount of baking soda must be applied to the tile. Then the cladding is wiped with a soft brush, without making any sudden movements.

With the help of soda, you can also process tile joints. This will be an excellent prevention of mold or mildew. After the procedure, the treated tiles should be rinsed with clean warm water.

You can clean the matte surface with a regular dish detergent. The gel is diluted in water, after which the tiles are washed with a sponge. Then the traces of the gel must be removed with a cloth soaked in warm water.

You can clean the grout from the embossed tiles with glycerin. The substance is diluted in water (1 part of the substance to 3 parts of a clean liquid). The composition gently cleans the surface without leaving stains and streaks.

Another simple folk way is to use an ammonia solution. One tablespoon of the substance is diluted with water, after which the contaminated area is wiped. As soon as the grout has completely disappeared from the surface, the tiles must be treated with clean warm water.

It is better to use white spirit to clean porcelain stoneware. The composition (1 tbsp. L.) Must be dissolved in one glass of water.The remains of grout are removed from the surface using a prepared solution and a soft sponge.

The hardest part is cleaning the fugue with epoxy. This component makes the building composition completely immune to the effects of organic acids and various alkalis. That is why special cleaners must be used to remove grout. Apply a softening agent to the contaminated areas and, after 10 minutes, remove the remaining mixture with a brush.

If this is your first time removing grout from a tile, there are several important points to pay attention to.

• Hydrogen peroxide can help whiten dirty seams. The solution is applied to darkened areas and left without rinsing.
• Epoxy paint or masking tape will help protect the seam from damage. It is recommended to use them during cleaning work.
• Always start grout removal from the bottom. This technique helps to eliminate even the smallest stains without leaving streaks on the surface.
• If you are using special household products, be sure to read the instructions. The substance must be diluted strictly in the specified proportions. Remember to wear protective gloves.

For information on how to effortlessly scrub grout from rough tiles, see the next video.