All About Wooden Slats

Cover strips or pretend strips are slats, bars that close the gaps between the window frames and the wall. They perform several functions at once: connection of structures, protection against moisture, wind and light penetration, aesthetic decoration in the interior. Wood trims will not only become a special decor, but will also fill the room with a natural smell, which is sometimes so lacking in noisy and dusty cities.

Since the false strips fulfill both protective and decorative functions, this means that they can be used both indoors and outdoors. Some models are designed for outdoor use.

Under the influence of ultraviolet light, the material begins to disintegrate. Then sheaths come to the rescue. They block the polyurethane foam and also create another insulating layer.

The planks can also be used indoors. A wide range of assortments will allow you to choose the color, material and texture that will suit your interior style.

Over the past few years, the use of window trims has become much more common. Although this element is not mandatory in this design, its use gives the room a neater and more comfortable look.

Cover strips are also used to hide mounting slots when installing a lining or frame. At the summer cottage, corner and curly cover strips for the barn are used.

The false slats are very simple and easy to install. This can be done without much skill or tools. And the variety in the choice will not complicate the process of selecting flats.

Cover strips can be made of various materials:

• plastic;

• metal;

• wooden.

Metal strips are made of galvanized steel or aluminum and can also have a flexible edge. They are not subject to so much changes in temperature, humidity and sunlight. Such pretend strips are attached to self-tapping screws with a press washer. It is recommended to use metal strips in brick or panel houses. In order to give the strips a neat look, they are covered with polymer paints, but you can find already painted models in stores. Often, such strips are used for cladding window facades of non-residential premises - garages, barns.

And also the strips are made of natural wood species, which is considered the most environmentally friendly material. In shape, they can be convex, flat or angular, resembling a regular rail. Pine is considered the main raw material due to its availability and low price, but linden, aspen, larch, beech, birch are also used for the manufacture of flats, there are also more expensive mahogany options. Window facades, which are also made of wood, are trimmed with wooden strips, so that the result looks harmonious.

For in order to extend the service life of wooden strips, they are coated with varnish, polymer compounds or paint for a better combination with the interior of the room. Some models can be curly: patterns will already be cut on the bar itself. The classic version is cut parallel stripes of different widths. Such models need to be used carefully, as they will definitely attract attention.

For a log house, you need to carefully select the strips in order to seal the cracks as tightly as possible. For these purposes, models made of wood and plastic are suitable.

The main advantages of wood strips can be considered:

• aesthetic appearance, since wood products always give the interior a noble look and simplicity at the same time;

• environmentally friendly and natural materials;

• strength of finished products;

• they are easy to attach using liquid nails or wood screws;

• wood provides a high level of sealing.

However, such models also have disadvantages:

• wooden strips can burst due to too high temperature changes, they are also afraid of dampness;

• high cost relative to plastic and metal models.

As for the sizes, they can be very different depending on the place where they will be installed. Cover strips are available for sale in lengths from 2 to 3 meters. The width of the false strips can be from 30 mm.

In order to preserve the presentable appearance of the window and the tightness of the seams for as long as possible, you need to take a responsible approach to the choice of flashing. To do this, you just need to follow a few simple recommendations.

1. It is necessary to choose the right color scheme so that the shades of the window frame and the false slats are combined. They may not be the same, but the result should look harmonious.

2. Calculate in advance how much material you need. To do this, measure the perimeter of the window frame and add a few centimeters in reserve.

3. Think about the combination of not only colors, but also materials. For example, wooden strips will not look good against white plastic windows, and vice versa. And also pay attention to the room itself - bright or expensive materials on the barn, which is used only for household purposes, will hardly look harmonious.

4. Don't go after the cheapest models. You have to pay for the good quality of the material. Cover strips made of quality materials will last longer, they will not deform and have better characteristics. Before choosing planks, check prices in different stores, choose goods from trusted manufacturers. The price for the lining cannot be the same as for the plastic model.