How to connect the music center to a computer and laptop?

Often, computer users want to connect a full-fledged music center to their equipment. With the advent of modern PCs and laptops in our life, the need for a separate speaker system has gradually disappeared, but sometimes there is a desire to give the device a second life. This can be done by connecting it to your existing computer hardware. We will talk about how to do this correctly in this article.

First you need to purchase a special cable to connect the music center to your computer. It is called "tulip" for its similarity in color. This wire is used to transfer a signal from one device to another. It can be found at any radio or electronics store. To choose a network wire, you will need to know the model of not only the existing computer, but also the music center connected to it, since various devices manufacturers do not always provide similar connection methods.

In this case, a short circuit may occur, which will lead to the failure of not only the speakers, but also the computer equipment. When choosing the length of the wire, take it with a small margin.

The set with the music center may have a wire with 3 tulip connectors. This option is not suitable for this purpose, so you will have to purchase a cable with 2 connectors.

In case of doubt, when you just can't find a suitable cord for connecting the acoustics to a computer, you should ask a sales assistant for help. The main thing is to know exactly the name of the technique for which the required guide is being sought. A specialist will help you choose the perfect wire that will not harm the operation of the equipment.

Connecting the music center to your computer is quite simple. This procedure is almost the same as connecting a subwoofer or home theater. After completing a certain algorithm of actions, you can connect your old (or new) music center to a PC, tablet or laptop. This requires a wire with a cinch connector. Sometimes such wires are included in the package of the music center, which greatly simplifies the work.

When looking for the right cord, sellers can offer to buy the same connectors with gold plating, citing the fact that with such a connection, the sound will be much cleaner, without unnecessary noise and distortion. This is true, but you can only feel the difference on professional equipment. At home, the difference will be very small. If you are not a sound engineer, then there is no point overpaying for the gold-plated version.

When all the necessary components are prepared, you can safely proceed directly to the connection.

The basic procedure is as follows:

• the first step is to disconnect the music center from the electrical network, the same can be done using a special button on the case;
• then you will need to connect the 3.5 mm connector to the connector on the computer, which is usually indicated in green, and in some cases - white;
• now on the back of the connected equipment it is necessary to find the area marked with the inscriptions "AUX" or "Line";
• connect tulip connectors by color;
• when everything is connected, you can turn on the music center to the network.

Although this procedure is considered safe, since even with a connection error it is unlikely to lead to serious consequences, you still need to use the simplest rules for carrying out such procedures. For example, it is advisable to arrange the connected equipment in such a way as to clearly see all the necessary connectors for the planned connection.

Before the actual connection, it is recommended to perform a visual inspection of the connectors, especially in cases where the device has not been used for a long time. All components of the equipment must be in working order. Otherwise, there is a risk of provoking breakdowns and malfunctions in the operation of devices.

Being engaged in self-connecting the music center to the computer, you should be as careful and careful as possiblemi. Do not jerk or insert wires sharply to avoid damaging important connectors on the conductor or device. As a result, you will have to deal with their repair, which will lead to additional expenses.

When all the connection procedures have been completed, it will be time for a check, which can be performed by simply turning on the music on the computer. For this, music saved on a PC or online radio is suitable. It happens that the sound does not appear immediately. You should not be afraid of such a phenomenon. To fix this annoying situation, you need to manually turn on AUX.

It also happens that there is sound, but the necessary clarity of sound is practically absent. You can fix this in the same place - in the sound settings. This is not difficult. The user will need to properly configure the capabilities of the musical technique.

How to connect the music center to your computer, see below.