Polishing and grinding marble

Marble is one of the most common materials used for interior decoration and the manufacture of various products. However, the surface of natural stone becomes dull over time, so it is necessary to grind and polish it in order to restore its previous attractive appearance. However, the procedure consists of several stages, in addition, first you need to select the appropriate means, and then follow the instructions and observe safety measures. We would like to bring to your attention some useful information on how to properly polish marble at home.

Marble serves as a material for the manufacture of various products that decorate the interior and landscape design. Natural stone is often used as flooring and wall cladding.

Marble requires regular maintenance and quality care, and the right products must be selected - and sanding is an integral part of the process. Surface wear depends on how intensively the stone product is used, and various external factors should also be taken into account. When it comes to flooring, it is easily damaged by shoes, furniture, which leaves marks on the material. In addition, over time, the color may become somewhat dull, stains appear. All this leads to the need to polish the marble, due to which the product's service life is extended.

When should this procedure be performed? If unpleasant imperfections have formed on the surface in the form of stubborn stains from fats and various liquids, you must immediately proceed to the task. Also, the cause may be the occurrence of erosion of marble from various solutions that are used to wash the floors.

The peculiarity of grinding is that various scratches are removed mechanically. About 2 mm of the top layer is removed from the surface of the marble stone, due to which an even coating is achieved. This procedure is suitable for restorations and is considered the only method for removing cavities, chips and other defects. Plus, sanding can remove stubborn dirt, dust and even grease.

First you need to study the joints of the slabs, because there may be loose seams, as well as foreign bodies and dirt. If you see large gaps, you need to fix this defect with two-component glue. The same means restores the integrity of the tile, if there are chips.

When looking for an adhesive, it is necessary to take into account the color of the floor or other marble surface. When it comes to colored material, dye can be added to the glue to achieve the desired shade. You will also need a polish that is used to process the equipment. There are various products on the market for this procedure. If you are not using special equipment, you can purchase a liquid formulation.

If it stays on the surface for too long, the marble will become stained and not easy to get rid of. It is also important to pay attention to the structure of the surface that will be processed, this affects the search for a composition for re-polishing. Material with a mirror-like shine is best treated with products that are intended for a glossy surface. As for rough marble, there are anti-slip formulations on the market.

It is necessary to choose equipment for the upcoming work according to different criteria. First, you need to assess the volume and complexity of the procedure, as well as the inaccessibility and size of the product. If we are talking about small areas that are not so easy to reach, the best choice would be oversized equipment or an ordinary grinder, which can be found in every owner's house. If we are talking about a large product, for example, steps, then you need to find a polishing machine, and also diamond grinding disc.

Before starting work, it is necessary to carefully prepare the surface for the use of special products, so make sure that there is no dirt, fat residues, foreign bodies and anything else on the stone that may impair the quality of the procedure. You can do the re-polishing with your own hands at home without outside help. It's pretty straightforward, and you will immediately see the amazing results of your work. Regardless of whether the stone is artificial or natural, white marble, black or colored, it must be carefully looked after.

Many people wonder if it is possible to polish marble on their own without any experience. The answer will be yes, since it is enough just to choose the right tools with tools and follow the instructions. An important step is sanding, which will level the surface, eliminate imperfections and prepare it for the next step.

Crystallization is not a mandatory step, but if you want to improve the quality of the material, you can use this technology. We are talking about polishing with a weakly acidic medium, however, the composition does not need to be prepared independently, it is better to purchase a ready-made product that has the required acidity indicator.

The essence of crystallization is to soften the top layer of the marble surface, after which it hardens again. Thanks to this procedure, cracks are removed, scratches are repaired, and the stone itself becomes mirror-like. This should be done before finishing polishing. To do this, you need a rotary machine, a product is applied to the surface, after which you need to carefully walk over the entire coating. Make sure that there is nothing unnecessary in the room in order to facilitate your work and ensure access to the material.

The first step is rough processing, during which a circle and pumice stone are applied, which will remove minor defects. It should be noted here that the marble will become thinner by 2-3 mm. The next step is polishing, which is designed to protect the stone from various factors.

Use wax or paraffin wax to repair small cracks, then wipe with a cloth. If there is dirt on the surface, you can use regular baking soda and water, stirring them in a 1: 2 ratio. This mass is applied to the coating, and after a few hours you will need to rinse the marble with warm water and wipe it dry.

At the last stage, you can hydrophobize the marble floor and impregnate it. The essence of this procedure is to improve the protective properties of the surface. The film that remains after the procedure will be transparent, while perfectly repelling water. But if there is no need for protection from moisture, you can wax and polish the surface.

It is important to note that natural stone has its own differences from artificial. For example, natural material is much faster and easier to get dirty, so it is recommended to immediately remove spilled drinks and wipe the floor dry.

Such a paste is perfect for a thorough polishing of marble, usually it is applied to dirt, then covered with oilcloth to dry the composition. Then you need to remove the film, add a little water and remove the paste from the treated area. You will immediately see an amazing result, in addition, you can prepare the product yourself or purchase it ready-made in a specialized store.

Artificial marble is not so finicky, since it is already made with a protective coating in production, so it is not so easy to scratch it. However, even such a surface must be carefully monitored. The procedure for natural and artificial stone is practically the same, the main thing is to do everything according to the instructions.

Turning to the masters for services, you don't have to worry about anything if the specialists have proven themselves well. But if you are going to do the grinding and polishing of marble yourself, you should not only prepare the tools and all the tools, but also learn about the precautions so as not to run into problems.

Household chemicals for washing or cleaning tile surfaces are also not suitable for polishing, moreover, they can leave stains that are difficult to get rid of. Also, some people mistakenly believe that substances with turpentine in the composition are excellent for re-polishing, however, this will only harm.

Decor elements made of marble are a striking detail of any interior. This material is one of the most popular for interior and exterior decoration, it is considered noble, besides, the assortment of patterns and textures is amazing. To ensure a beautiful interior, all surfaces, including marble, must be carefully maintained. If you do not take care of the product, it will only spoil the overall appearance. Marble is an expensive stone, so it must be properly polished and the recommendations of the experts must be followed. When choosing tools, you should choose only proven equipment that will work well and fulfill its function.

How to properly grind and polish marble, see the video.