Motor-pumps "Geyser": types and characteristics of models

Carrying liquid in buckets or even pumping it with hand pumps is a dubious pleasure. The Geyser motor pumps can come to the rescue. But in order for the investment in their purchase to be fully justified, you need to approach the choice as carefully as possible.

Geyser products deserves the most attention for the following reasons:

• the pumps are reliable and quite practical;
• they can suck in water automatically;
• remote start on command is provided;
• maintenance and repairs are simplified to the limit.

The fire pump "Geyser" MP 20/100 is in demand. The technical data sheet contains the following characteristics:

• starting is carried out by an automatic starter;
• total engine power with a volume of 1500 cubic meters. cm is 75 liters. with.;
• hourly fuel consumption is 8.6 liters;
• in a second, up to 20 liters of liquid are ejected through the barrel, ejected per 100 m.

A motor pump with a total weight of 205 kg is guaranteed for 1 year. The mechanism is recommended for rural and urban areas.

"Geyser" MP 40/100 stands out even in comparison with the previous device. The power of the stationary device reaches 110 liters. with. This force allows you to throw 40 liters of water per second at a distance of up to 100 m. The designers have provided for water cooling of the engine. The engine itself, consuming 14.5 liters of AI-92 gasoline per hour, is connected to a tank with a capacity of 30 liters - that is, you can extinguish the fire for about 2 hours.

First, the water passes through a 12.5 cm wide opening. At the outlet, you can connect several barrels of 6.5 cm. The total weight of the pump reaches 500 kg. With its help, the flame is extinguished with both pure water and solutions of foaming agents. Model 40/100 can be used in emergency pumping mode.

If the requirements for a motor pump are exactly the same, you should give preference to the Geyser 1600 version. In one hour, it is capable of throwing up to 72 cubic meters of water onto the combustion center. m of liquid. The dry weight of the installation reaches 216 kg. The longest extinguishing distance is 190 m. In 60 minutes the pump will consume from 7 to 10 liters of AI-92 gasoline. The exact figure is determined by the intensity of the work.

The motor pump "Geyser" MP 13/80 is presented with a drive from a VAZ car. The pump is able to take water from containers and from open sources of various types. With the help of this equipment, liquids are often pumped from one reservoir to another, basements and wells are drained, and gardens of various sizes are watered. The technical characteristics of the device allow it to be used at temperatures from -30 to +40 degrees. The pressure in the nominal mode ranges from 75 to 85 m. AI-92 gasoline is used as fuel.

‌The manufacturer of the pumps guarantees that the Geyser 1200 motor pump is capable of providing a water column head of up to 130 m. Under these conditions, fire fighting becomes noticeably more effective. In 1 minute, up to 1020 liters of liquid can be pumped towards the hearth. But it is worth noting that now such a pump has been discontinued. Its more modern counterpart is the MP 20/100 model.

If you are interested in motor pumps with increased corrosion resistance, you should give preference to the MP 10 / 60D model. This device provides a head up to 60 m, sucking water from tanks and reservoirs up to 5 m deep.The hourly fuel consumption reaches 4 liters. The dry weight of the product is 130 kg. 10 liters of clean water are supplied per second.

Of the new products, it is worth taking a closer look at the MP 10/70 version. Pumping unit with a total capacity of 22 liters. with. supplies up to 10 liters of water towards the fire site. The pump motor is cooled by air movement. A diaphragm vacuum pump gives a water column of 70 m. A four-stroke engine consumes 5.7 liters of AI-92 gasoline per hour.

For a detailed review of the Geyser motor pumps, see the next video.