Motoblocks SunGarden: characteristics, pros and cons, features of operation

SunGarden walk-behind tractors have recently appeared on the domestic agricultural machinery market, but have already gained quite a lot of popularity. What is this product, and what are the features of the operation of SunGarden walk-behind tractors, let's figure it out.

SunGarden walk-behind tractors are manufactured in China, but the trade mark itself belongs to a German company, so German specialists monitor the strict implementation of technological processes at all stages of equipment production, which allows us to produce goods of excellent quality at an attractive price.

Motor-blocks SunGarden in their technical characteristics are in no way inferior to counterparts from well-known brands, but at the same time they will cost you much cheaper. And this is not the only plus of these units. Here are some of the advantages of SunGarden walk-behind tractors.

• The brand has more than 300 service centers throughout Russia, where you can carry out maintenance of your device.
• Motoblocks are sold complete with additional attachments. You will be able to use the device all year round.
• If your equipment did not come with any attachment, you can purchase it separately.
• A variety of models will allow you to buy a unit according to your requirements.

The range of SunGarden walk-behind tractors consists of several units.

• MF360. This model will become an irreplaceable assistant in the garden. It has a fairly high rotational speed of mills of 180 rpm and a depth of tillage up to 24 cm. In addition, the walk-behind tractor is equipped with a professional 6.5 liter engine. with., which allows the device to work on a slope, without fear of its overturn. The handles of the appliance can be adjusted to almost any height: you do not need an additional key to turn them. The walk-behind tractor does not have consumable parts such as belts in the design, so you do not have to spend extra money on them. Equipped with additional attachments: plow, hiller, mower, brush, snow blower, trolley for transporting goods. The weight of the device is about 68 kg.
• MF360S. A more modern modification of the previous model. This modification has increased engine power up to 7 liters. with., and also changed the processing depth to 28 cm. The complete set of the walk-behind tractor is the same as that of the MF360 model. The unit weighs 63 kg.

• MB360. A mid-range motoblock with an engine power of 7 liters. with. The plowing depth is 28 cm.This device can also be used for cultivation, hilling, digging out potatoes, transporting crops, as well as with the ST 360 snow plow attachment to remove snow, with the help of a broom, to clear paths from debris and dust. The weight of the model is about 80 kg.
• T240. This model belongs to the light class. Suitable for use on a small garden plot or cottage. The engine power of this unit is only 5 liters. with. The plowing depth is about 31 cm, the rotational speed of the cutters reaches 150 rpm. The weight of the modification is only 39 kg.
• T340 R. This model will suit you if your plot does not exceed 15 acres. It has an engine with a capacity of 6 liters. sec., which provides a rotational speed of the cutters of 137 rpm.The walk-behind tractor is equipped with a serviceable gearbox. The set includes only cutters for plowing and cultivating the land. The unit weighs approximately 51 kg.

Working with a walk-behind tractor does not require any specific preparation. To do this, it is enough to study the passport of the unit.

According to the operating instructions, you should first prepare the walk-behind tractor. To do this, it is necessary to inspect it, if necessary, stretch all the bolts.

Next, you need to set the handle to the working position. Here you need to be quite careful not to damage the clutch cable. You should also adjust the cable itself so that it is not too tight, but does not dangle. Now you need to install the desired nozzle. For this, the drive shaft connector is mated with the connector of the nozzle.

After the device is adjusted for you and prepared for the necessary work, it should be refueled. For this, the oil level is checked and added if necessary. The oil level must be checked not only in the engine crankcase, but also in the gearbox, if there is one in your unit. Further, gasoline is poured into the tank. This procedure is carried out before starting work. Do not add fuel when the engine is running.

Now you can turn on the walk-behind tractor and start working.

Remember to maintain your device.

• Clean the appliance after each use, taking particular care of the clutch and engine.
• Stretch bolted connections as needed.
• Check the condition of the air filter every 5 hours of operation, and replace it after 50 hours of operation.
• Change the oil in the engine crankcase every 25 hours of operation and check the condition of the spark plug.
• Change the gearbox oil once a season, lubricate the cutter shaft, change the spark plug. It may also be necessary to replace the gear chain. If necessary, the piston rings should also be replaced.

For an overview of the SunGarden T-340 multicultivator, see the video below.