Potato diggers for motoblocks "Neva": types and tips for use

Almost everyone knows how hard it is to grow potatoes. This is not only very monotonous, but also quite difficult work. Therefore, you can purchase a potato digger that will help you cope with this task in a matter of hours. To date, the choice of such equipment is quite large. However, among many, it is worth paying attention to the necessary equipment for the Neva walk-behind tractor.

The potato digger for the "Neva" walk-behind tractor is a fairly simple equipment with which you can quickly dig potatoes of any kind. Not so long ago, only large farms could mechanically cope with such a task.

Today, such a process is available to anyone. Therefore, when buying a walk-behind tractor, almost everyone tries to purchase all the additional devices with it or just design everything with their own hands.

If we talk about the process itself, then it is distinguished by its ease and speed. Even a novice gardener can cope with such a task. To do this, you just need to familiarize yourself with the actions, and you can get to work.

The digging process is as follows: its teeth are driven into the ground and immediately begin to lift the potatoes up, after which they lay them on the ground. There is very little work left for a person: just collect the tubers and transfer them to a storage location. Such a process significantly saves both the owner's time and his strength.

There are several types of potato diggers. The principle of operation is the same for everyone, but some differences still exist. All of them need to be considered in more detail.

The potato digger itself is a simple shovel, which has two small roundings, as well as teeth. They are on top of the structure.

The sharp part of the digger plunges into the ground, after which it lifts the potatoes onto the twigs, where the earth crumbles, and then moves it to the ground.

This type of construction is a vibrating digger. It is more complicated than the previous one. She has a share, as well as a grate that can sift potatoes. It is located on digger wheels. Subsequent actions are identical.

If we talk about the advantages, then they are available in both diggers. So, simple ones will cost much cheaper, but on top of that, they are both reliable and very easy to use. However, screen diggers are more productive.

This type of construction is a vibrating digger. It is more complicated than the previous one. She has a share, as well as a grate that can sift potatoes. It is located on digger wheels. Subsequent actions are identical.

If we talk about the advantages, then they are available in both diggers. So, simple ones will cost much cheaper, but on top of that, they are both reliable and very easy to use. However, screen diggers are more productive.

Such a digger is an attachment to a walk-behind tractor, which distinguishes it from other types. Therefore, it is often also called fan or ribbon. Such a digger has a moving belt.Through it, the potatoes are fed upward, where the earth crumbles, while it is not damaged at all.

Almost all digger models are identical to each other. Among the potato diggers, it is worth noting those that are in great demand. These include such designs as "Neva KKM-1" or "Poltavchanka".

If we consider vibration models, then they are more suitable for the Neva MB-2 and Salyut walk-behind tractors. This model can be classified as a screen type structure. It has a knife, as well as a shaker moving in an ellipsoidal trajectory. In addition, the knife can be connected through an adapter to the frame, which will significantly increase vibration. This will help the potato digger to be used on very heavy soils.

If we consider some of its characteristics, then it can dive to a depth of 20 centimeters. This structure weighs 34 kilograms, while its width reaches 39 centimeters.

This model also belongs to vibration diggers, but has more advanced designs. The composition of such a model includes a ploughshare, which is quite active, as well as a grate sifting potatoes. With the help of a ploughshare, you can remove the required layer of soil, which immediately falls on the grate, where it is sieved. The remaining potatoes are thrown to the ground, where they can be collected along the trail of the walk-behind tractor.

This design is designed for harvesting at a row spacing of 60 to 70 centimeters. In addition, with the help of such a device, you can also select beets and carrots. The technical characteristics of this unit are as follows:

• it can plunge into the ground by 20 centimeters;

• the capture width of potatoes reaches 39 centimeters;
• the structure weighs 40 kilograms;
• in addition, with such a digger, you can collect up to 97 percent of the crop.

Its cost is high, but it is justified.

This design refers to screening models, while it can work with any walk-behind tractor. To make this possible, the pulley can be installed on both sides. Accordingly, all spare parts are also reinstalled. This design can be used on various soils.

Its technical characteristics are as follows:

• it weighs up to 34 kilograms;
• can remove a layer of earth up to 25 centimeters;
• while gripping it reaches 40 centimeters.

Everyone can buy a potato digger for the Neva walk-behind tractor. Each of them has a very simple design and different advantages. To make your choice a little easier, you can do it yourself. Moreover, special costs and efforts will not be required. To make the simplest model, it will be enough to take an ordinary old shovel and a few reinforcing rods. If there are no rods, then the teeth from the unnecessary pitchfork will do.

But a homemade vibrating potato digger will require not only the study of the walk-behind tractor, but also well-made drawings. In addition, it must be remembered that such a structure will eventually be able to cope with different soils: both light and heavy.

To start working on a digger, you need to know what elements it consists of. First of all, this is the chassis, then the frame itself, some suspension elements, as well as the adjusting rod. Having familiarized yourself with them, you can start developing drawings, where you need to specify in detail all the dimensions of the future structure.

After that, the work on the model itself begins. It can be done in several stages.

• The first thing to do is design the frame. To do this, you need any pipe available at home with a suitable size.After that, it needs to be cut into pieces and then welded.
• Next, you need to install jumpers, which are needed in order to be able to install rods to control the entire structure. They must be fixed at a quarter of the entire length of the frame. On the opposite side, the wheels are attached.

• After that, you can start installing vertical racks. To do this, in the place where there are already jumpers, it is necessary to attach two small squares, moreover, metal. Next, the racks are placed, which in the end should be connected with a small strip made of metal.
• Then you can start making the ral. One workpiece is attached to the posts, and the other is attached to the other side. After that, they must be welded together and bent into the desired shape.
• Next, a lattice is made. To do this, a rod must be attached to the rail, and its second part must be removed and attached to the rods.
• At the end of everything, you need to install the wheels, and then start adjusting the traction system.

Of course, for many gardeners, it will be difficult to make such a non-standard home-made design. In addition, it is possible that the factory unit will be both stronger and better. However, having made a digger at home, it can be adjusted exactly to those soils that are on this site.

In any case, the choice remains always open. Make it in the direction of a purchased digger, or construct it from improvised means, saving a little money.

Modernization makes life much easier for many people. You don't have to do much for this. One has only to purchase the necessary design, as well as study the instructions that come with it.

After that, you can start digging the potatoes itself. To do this, one person must operate a walk-behind tractor with a potato digger, and the second, or even several, must collect the crop extracted from the ground behind him.

While this technique is lightweight and reliable, it also requires some maintenance. At the end of the work, it is imperative to thoroughly clean it from dirt. In addition, you can also wipe it with a dry cloth.

It is better to store the digger in a dry place. In addition, those parts that move must be lubricated with oil. And also for storage, it must be placed in a very stable position so that it does not accidentally fall.

Having familiarized yourself with the types of potato diggers, you can easily choose the one you like, or just make it at home. Both choices will help save time at work, as well as health.

For an overview of the potato digger KKM-1 on the Neva walk-behind tractor, see the next video.