Choosing an engine for the "Cascade" walk-behind tractor

Motoblocks "Cascade" are common technical means and are used to perform various works. Its popularity is due to the fact that manufacturers have equipped these units with the necessary functions and characteristics, which allows it to be used in almost all cases of life, as well as for cultivating plots of land.

Motoblocks "Cascade" have 4 main components for control and movement. It:

• motor;
• controls;
• Checkpoint;
• running gear.

The chassis consists of a frame and drive wheels. There are also additional units through which torque is transmitted from the motor to the wheels. The unit is equipped with powerful wheels with large treads, which makes it possible to use the device even on heavy soils.

The transmission is reliable and transmits torque from the engine to the wheels, being an integral participant in the turning of the unit. The torque is transmitted using gearboxes and a chain, and the box itself has four speeds and is installed in a special block on the frame. A large number of models also have a reverse speed, which allows you to increase the maneuverability of the device.

The control is carried out by the clutch handle, with which you can adjust the choke on the carburetor by adding or decreasing the engine speed. Also, with the help of the clutch handle, the wheels are blocked when it is necessary to turn in one direction or another. The steering wheel can be adjusted to the height and other parameters of the user.

Thanks to all these points, it is easy and simple to control the walk-behind tractor even with prolonged work on the site.

Filling up with quality fuel is also important. If you do not follow these rules, then over time the device may fail and become unusable.

The motor belongs to the main elements of any mechanism and the efficiency of the entire device depends on it.

Usually the motor consists of:

• distribution mechanism;
• cylinder block;
• carburetor;
• ignition;
• starter;
• cooling systems.

Initially, the DM66 and DM68 motors were installed on the walk-behind tractors. But they often fail due to improper operation, normal wear and tear and for other reasons, and therefore it is necessary to replace such a motor if it is not possible to restore it.

One of the most common replacement engines is the Lifan 168. It has an engine displacement of 196 cubic centimeters and runs on gasoline. The power is 7 horsepower, air cooling, and therefore they can only work for a short time.

Installing the motor is simple and does not require retrofitting of the frame mounts.

Fluid replacement works are performed as follows:

• on the muffled engine, unscrew the drain plug, which is located on the pallet;
• drain oil from the system;
• tighten the plug;
• fill in new oil;
• warm up the engine;
• check the level and top up if necessary.

The B&S I / C engine, which belongs to modern models and is popular in domestic conditions, can also be installed. They are often used on Cascade units.

This is due to the following features of the motor:

• power 7 horsepower;
• reinforced transmission;
• enlarged combustion chamber;
• minimal noise during operation;
• high functionality even at low temperatures.

The imported Vanguard OHV motor also belongs to powerful engines that can be installed on a walk-behind tractor of this manufacturer and cope with all the necessary tasks. This engine has a capacity of 7 horsepower.

You can also supply the Subaru EX17 engine, which is popular among the owners of the Kaskad walk-behind tractors. He has proven himself excellent. It has a special design of the distribution mechanism inside and a large shaft diameter, which allows to increase the engine power and its efficiency.

As you can see, at present there are quite a few engines that can be installed on the "Cascade" walk-behind tractor. The choice of a suitable model depends not only on its functionality, but also on the financial capabilities of the owner.

It is also necessary to pay attention to the configuration, build quality and other points that are familiar to any motorist. If you don't have the skills, you should always turn to specialists for help. The engine must meet all the requirements, which will allow it to operate efficiently and increase its service life.

Among the main problems of the "Cascade" walk-behind tractor are the following:

• The engine will not start;
• the motor runs intermittently.

The reasons for such malfunctions can be very different, from poor-quality fuel to clogged candles. Also, the reason may be in a discharged battery. In this case, you need to recharge the battery and clean the fuel line or spark plug, and, if necessary, change it completely.

Another malfunction may be a loss of power from the motor. The main reason in this case is a clogged carburetor or filter, which prevents the required amount of fuel from entering the combustion chamber. In this case it is recommended to clean the system, as kickback is possible when starting the motor.

All of the above breakdowns occur quite rarely, and if necessary, you can fix them yourself, this does not require special knowledge. If there are difficulties with maintenance or repairs, then you can contact the specialists or look for the operating instructions on the network.

To increase the functionality of the "Cascade" walk-behind tractor, the manufacturer installs attachments on it, with which you can perform various operations.

Among the most common pendants are the following:

• potato planter;
• trailer;
• plow;

• hiller;
• lugs;
• mower and stuff.

For an overview of the "Cascade" walk-behind tractor, see the next video.