All about Carver walk-behind tractors

Carver walk-behind tractors are manufactured in Russia, in the city of Omsk. This is one of the best domestic motoblocks, which has established itself as exceptionally high-quality, reliable and functional equipment.

First, a little theory. The Carver brand belongs to the Perm manufacturing enterprise Uraloptinstrument, which became widely known about 10 years ago, when it launched the production of gardening equipment. Perm walk-behind tractors are characterized by decent quality, simple and understandable design, interchangeability of main units and parts, as well as a democratic price.

The basic equipment of the walk-behind tractor allows you to loosen the earth, while removing weeds from it. Moreover, the functional features of the unit make it possible to transform it into a mini-tractor with a wide range of possibilities. Carver products are capable of handling many of the challenging tasks often faced by homeowners and small farmers. The power shaft together with the hitch can be aggregated with any types of attachments and trailed additional equipment, both domestic and foreign production. Consumers have noticed that the engine works perfectly even on low-quality oil and fuel without losing its operational properties.

The motoblock is adapted to the Russian climate and can work in any weather conditions - the efficiency of the unit is the same at both low and high temperatures. The volume of the fuel tank is quite large, so the installation can work continuously for a long time without the need for refueling.

With a very solid weight, the walk-behind tractor is very compact and ergonomic. It takes up very little space, so it can be transported in the trunk of any car, and even stored on the balcony. At the same time, the unit is quite maneuverable - it passes between bushes and trees without any problems. On bumps, the technique behaves quite steadily, moreover, it has a small parking support, which, when interacting with trailers, can be replaced with a third wheel.

All control mechanisms of the system are located on the handle. The handlebar itself can be adjusted in width and height to make the operator's job as easy as possible. The operator's work is completely safe, since a person is reliably protected from stones from under the wheels and clods of earth by special wings made of plastic. All main components and mechanisms are covered with leather, and the gearbox housing is made of extra strong materials, thereby minimizing the risk of damage during mechanical collisions.

The cost of Carver walk-behind tractors is considered one of the lowest in Russia at the moment, and the quality does not suffer from this at all. Users claim that buying a Carver walk-behind tractor with a set of spare parts and additional elements is a profitable purchase today. The technique can pay off in just a season as the product is used almost every day, reducing the need for manual labor.

The most popular are the Carver MT-650, Carver MT-900, Carver MC-650, Carver 900-DE models. Let's take a closer look at the most popular walk-behind tractors of this brand.

This is a fairly light unit, its weight is 29 kg, the device operates on a four-stroke engine with a capacity of 4 liters. with. There is no gearbox, the transfer of torque to the gearbox is carried out using a special belt. The clutch is activated by adjusting the belt tension level. The crankshaft is vertical, thanks to this, the design becomes simple and understandable, and the cost is low.

The walk-behind tractor is compact and structurally simple. The unit is very efficient, it runs on a four-stroke engine, the potential power is 6.5 liters. m. Optimal for haymaking, snow clearing or processing of soil of different types of hardness. It has two forward gears and one reverse gear, thanks to which it is characterized by increased maneuverability. Air filter, oil The package includes 5 wheels, thanks to which the walk-behind tractor has a high cross-country ability. The weight of the device is 105 kg, the coverage width of the land row varies from 80 to 120 cm, the plowing depth is 35 cm.

This is a rather heavy walk-behind tractor weighing about 91 kg, so it can be used without special weights. The unit is equipped with a four-stroke gasoline engine with a capacity of 6 liters. with., tank volume - 196 cm3. Equipped with a rotary tiller, it allows you to dig up the ground with a deepening of 20-25 cm. It is also used for clearing the site from snow. The set includes a wagon for transporting heavy loads. Has 2 forward speeds and one reverse. Wheels with tubeless tires, do not get stuck in wet ground. The motoblock can work without interruption and refueling for 7-8 hours, while the ground coverage varies from 50 to 110 cm. The system is equipped with an air-oil filter and a transport wheel.

Carver MT-900 is a professional walk-behind tractor, reinforced with a 9 hp motor. with. The weight of the unit is 141 kg, so it works without any weights, and thanks to the wide pneumatic wheels it easily overcomes even strong off-road conditions. It has 2 forward and reverse gear speeds, this significantly improves the maneuverability of the walk-behind tractor. The plowing width of the soil can be different depending on the number of rotary tillers used, starting is done manually, no special effort is required on the part of the operator.

Motoblock manufacturer Carver said the following technical and operational parameters of their models.

• The engine is a gasoline, four-stroke, an air cooling system is provided.
• Power - from 6 to 9 liters. with.
• The number of speeds is 2 forward and 1 reverse.
• The clutch is gear, made using a V-belt.
• Travel speed - from 3.6 to 7.2 km / h.
• Wheels are rubber.
• The maximum tillage depth is 35 cm.
• Land capture parameter - up to 120 cm.

The dimensions and power of the motoblocks of this brand make it possible to ensure effective adhesion of the unit to the plow for 2-3 plowshares, which makes it possible to dig up a strip of land up to 1 meter wide. It is not recommended to use a single share. It is optimal only when raising virgin soils, digging trenches or leveling the area under the foundation; it requires a larger power device.

Quite a functional device that allows you to form beds for planting.When hilling adult plants, much more oxygen enters the roots, but excess water after rain, on the contrary, does not linger. Simultaneously with hilling, all weed growth between the beds is removed. Mowers. Used for mowing hay, removing weeds and tops. The working width of such equipment reaches 120 cm and, in general, allows processing up to 1 hectare per day. Potato planter. A device that allows you to plant potato tubers, as well as seeds of cereals and vegetables.

Another useful device that makes it easier for gardeners to collect potatoes and other root crops. Typically, this equipment has a working width of 30 cm and a submersion depth of 27 cm. Snow blowers and plows. This equipment allows you to quickly and efficiently clear the area from snow, both freshly fallen and stale. It usually uses a rotary motor as well as brushes and shovels.

Cargo trailers and trolleys allow you to move heavy loads from one place to another. They are attached to walk-behind tractors with a special hitch. The power of the device allows towing loads weighing up to 0.5 tons. It should be noted that the speed of movement is not high, but in any case it is more convenient than carrying heavy things by hand. Weights. If the weight of the walk-behind tractor is not enough in order to ensure strong adhesion to the ground, special devices are used that are attached to the body of the installations. Most often, instead of wheels, hooks with a mass of about 70 kg and a diameter of 50-60 cm are mounted.

So that Carver walk-behind tractors will serve you faithfully for many years and can be used at any temperature, you should adhere to the basic rules for the operation and storage of this type of equipment.

• It is very important to choose the right oil. For motoblocks of this type, it is better to use motor SAE 10W-30 and transmission SAE 80 / 85W-90.
• The initial oil change should be done after the first break-in, 5 hours after starting work, and then every 100 hours of use.
• The oil in the gearbox should be filled at once for the entire period of the transmission. In the future, it is not changed, but only poured as needed.
• Before using for the first time, pour a little oil into the air filter container.
• Gasoline must be of high quality, not lower than A-92. It is important to keep the fuel level under control at all times - the red limit line must not be exceeded.
• It is recommended to store the Carver walk-behind tractor in a dry place out of direct sunlight.
• When preserved for a long time, prophylaxis is done. The fuel is drained, the walk-behind tractor is cleaned of dust and dirt, the oil seals and candles are unscrewed. Pour 15-20 ml of engine oil into the cylinder, after which the candle is screwed back and all the levers are treated with silicone grease.
• After purchasing the walk-behind tractor, you should run it in. To do this, for 10 hours, it is operated in different gears so that no more than 2/3 of its potential power is used.

Tillers Carver, with proper handling, are reliable, however, minor technical problems do occur. The most common problems are:

• The motor does not start. In this case, you need to check for the presence of gasoline - most likely it is not enough, or it is of inadequate quality. In addition, the ignition is off or the fuel cock is closed.
• If the engine stalls quickly after starting, then in most cases the clogging of the air filter is to blame.

To change the oil in the Carver walk-behind tractor, see the next video.