Motoblocks "Lynx": characteristics, models and features of operation

Motoblocks "Lynx", which are produced in Russia, are considered reliable and inexpensive equipment used in agriculture, as well as in private farms. Manufacturers offer users high-tech equipment that has good characteristics. The model range of these units is not so large, but they have already gained popularity when performing certain works.

Currently, manufacturers offer their customers 4 modifications of equipment:

• MBR-7-10;
• MBR-8;
• MBR-9;
• MBR-16.

All motoblocks are equipped with gasoline-powered power units.

Among the main characteristics of machines are the following:

• economical fuel consumption;
• high power;
• low noise during operation;
• sturdy frame;
• maneuverability and convenient control;
• a wide range of attachments;
• the possibility of transforming the product for transportation.

This version of the walk-behind tractor belongs to heavy types of equipment that can easily handle large areas of land. The continuity of operation of the unit on the site to prevent its failure should not exceed 2 hours, as stated in the operating instructions. Aggregates are used for the processing of personal territories, plots of land in the country, and so on. The successful placement of the main controls makes such a walk-behind tractor easy to control, maneuverable and ergonomic.

The equipment is equipped with a 7 horsepower gasoline engine and is air-cooled. The engine is started with a starter. With the help of a walk-behind tractor, you can perform the following types of work:

• weed areas;
• mill;
• plowing;
• loosen;
• spud.

When using attachments, you can use this technique to harvest or plant potatoes. The weight of the machine is 82 kg.

Before buying, it is important to assemble the unit according to the instructions and run it in. The break-in must be carried out immediately after the purchase of the unit and must be at least 20 hours long. If after that the machine works without failures in the main units, then the running-in can be considered complete and in the future the equipment can be used to perform various functions. It is also important to drain the used oil and change the fuel in the tank immediately after running in.

After carrying out various types of work, it is recommended to perform the following actions:

• clean working parts from dirt;
• check the reliability of the fastening of the connections;
• check fuel and oil levels.

This technique belongs to heavy units and has a balanced design, as well as large wheels, which allows the unit not to slip or overload in a swamp. Thanks to such characteristics, the equipment does an excellent job with the tasks, and, if necessary, it can be equipped with attachments from various manufacturers.

Advantages:

• the engine is started with a manual starter;
• large diameter of the piston element, which ensures high power of the unit;
• multi-plate clutch;
• large wheels;
• large capture of the width of the processed surface;
• all metal parts are coated with an anti-corrosion compound.

To increase the service life of these devices, they must be properly looked after and periodically maintained. Before leaving the site, you need to check the presence of oil in the engine and fuel in the tank. It is also worth visually assessing the condition of the machine and checking the fixation of the equipment before each exit. After 25 hours of operation on the device, it is necessary to completely change the oil in the engine and use the 10W-30 composition recommended by the manufacturer. The transmission oil is changed only 2 times a year.

Any equipment, regardless of manufacturer and cost, can fail over time. This happens for a variety of reasons. There are both minor breakdowns and more complex ones. In the first case, the problem can be solved independently, and when individual units fail, you should contact the service center or other specialists to solve them.

If the engine is unstable, to eliminate breakdowns, you must perform the following actions:

• check the contacts on the candle and clean it if necessary;
• clean the fuel lines and pour clean gasoline into the tank;
• clean the air filter;
• check the carburetor.

Work on replacing the engine on a tracked unit is carried out in the usual manner, as on any other type of equipment. To do this, it is recommended to disconnect all controls from the motor, unscrew the bolts of its fastening to the frame, put the new unit in place and fix it there.

The popularity of this type of technology is determined not only by its affordable cost, but also by the ability to install various attachments in order to increase the functionality of the MB.

• Milling cutter. It is supplied initially with a walk-behind tractor and is designed to process the top ball of the soil, which makes it softer and helps to increase the yield. The width of the cutter for each model of the walk-behind tractor is different. The description is in the instruction manual.
• Plow. With its help, you can cultivate virgin or stony lands, plowing them.

• Mowers. Rotary mowers are commonly sold that come in various widths and are mounted to the front of the frame. Before starting work with such devices, it is recommended to check the reliability of the knives fixation so as not to harm yourself.
• Devices for planting and harvesting potatoes. To automate the process, an attachment is used, which is installed on the "Lynx" walk-behind tractor. This design has a specific shape and structure, thanks to which it digs out the potatoes and throws them onto the surface of the ground. The trenches that are obtained in the process are buried by hillers.

• Snow blower. Thanks to this equipment, it is possible to clean the area from snow in winter. The hitch is a bucket that can collect snow and swivel it to the side.
• Caterpillars and wheels. As standard, Lynx walk-behind tractors are supplied with ordinary wheels, but if necessary, they can be changed to tracks or lugs, which will allow you to work in swampy areas or in winter.
• Weights. Since the weight of the models is relatively light, they can be weighted to improve the traction of the wheels. Such a device is produced in the form of metal pancakes that can be hung on the frame.

• Trailer. Thanks to him, you can transport oversized cargo. The trailer is attached to the rear of the frame.
• Adapter. Motoblocks "Lynx" have no place for the operator, and therefore he needs to go behind the device. Because of this, a person quickly gets tired. To facilitate the process of working with these devices, you can use an adapter that is installed on the frame and allows the operator to sit on it.

For an overview of the "Lynx" walk-behind tractor, see below.