Plitonit C glue: purpose and properties

Today in the construction market you can find a wide variety of products, including glue. The renowned company Plitonit produces a wide variety of adhesives for tiles, marble and more. Today we will talk about Plitinit C products, the advantages of the material and its properties.

Construction specialists speak very positively about Plitonit C products. This product can be considered universal, as it is excellent for laying almost all types of cladding materials. It can be ceramic tiles for wall or floor laying, marble, natural and artificial stone and other materials. In addition, this glue is often used during the installation of the so-called warm floor and during the decoration of swimming pools.

Plitonit glue works well during installation. The special composition of the material allows it to be frost-resistant and water-resistant.

Unlike other mixtures, during the facing work, this glue does not allow the ceramic surface to settle strongly, which makes it possible to carry out the installation as correctly and efficiently as possible.

It is also important to note that this glue can be used even for work with a difficult surface, for example, painted or with the remnants of a particular floor covering. The mixture dries quite quickly, so during styling it is recommended to take into account the fact that you will have only half an hour of time to adjust.

And after a day, you can safely start grouting and even use the surface, that is, you can already walk on the tiles without fear.

If this type of mixture was used exclusively during the installation of a warm floor, then the system can be started only after three days. If you decide to test the effect of the underfloor heating earlier, then the work will be ruined. You will no longer have to wait for the durability of the repair done.

It is important to note that Plitonit C products are different. In a hardware store, you can find three different types of this glue.

• Products marked "light" it is characterized by low consumption during work and is excellent for cladding any difficult surfaces. In addition, thanks to this glue, you can work with absolutely any tile. This type of product has excellent adhesion, is economical to use, and very easy to work with. It should be noted that, unlike mixtures with a different composition, these products can save up to forty percent. This economical expense attracts many builders and fitters.
• Glue, on the packaging of which there is no designation, that is, simply Plitonit C, ideal for working on the most difficult surfaces. It can be a surface that has been painted with an alkaline paint, consisting of cement slabs, faced with old tiles, etc. This product is a universal option for any type of tile, underfloor heating, pool.

• Adhesive marked "marble" ideal not only for a variety of tiles made of this stone, but also for mosaics.As a rule, this composition is white, which makes it easy to use even when working with glass tiles. After the completion of the work, this mixture does not form any plaque and does not change the color of the laid tiles. The glue is flexible, easy and pleasant to work with. Experts recommend using this product when installing underfloor heating and for decorating swimming pools.

If you are planning to work with this mixture in the near future, then for sure you will need small recommendations and tips on its use.

• You need to dilute the mixture strictly according to the instructions that are on each package. During work, do not forget to periodically stir the composition for the best quality of work and adhesion to the treated surface.
• It is important to remember that the dry mixture is introduced gradually into clean, pre-prepared water, and not vice versa.
• Before applying this mixture, it is recommended to prime the surface with a special compound from the same manufacturer. This will allow for better finishing work.

• Do not apply the adhesive directly to a large area of ​​the prepared surface, as you will only have thirty minutes to install the tiles.
• If there is a draft or high humidity in the room, then the correction time is halved.
• If you have applied too much mixture to the surface and it has already started to crust over, it is advisable to remove the mixture and apply a new one.

You can find out more information about Plitonit C glue in the next video.