Glue "Moment Joiner": characteristics and scope

Glue "Moment Stolyar" is well known in the domestic market of construction chemicals. The composition is produced at the Russian production facilities of the German concern Henkel. The product has established itself as an excellent adhesive, suitable for the repair and manufacture of wood products, is widely used in everyday life and at work.

The Stolyar contains a polyvinyl acetate dispersion with the inclusion of special plasticizers and additives that improve the adhesive properties of the material and increase the reliability of the connection. In the process of manufacturing Moment glue, toxic and poisonous substances are not used, which makes the material environmentally friendly and allows it to be used in the repair of household items. The chemical safety of the product is confirmed by a quality passport and certificates of conformity that meet strict European standards.

Thanks to special additives, the adhesive does not disturb the structure of the wood fibers. After drying, it is invisible. The scope of the product is quite wide. The glue is successfully used when working with all types of natural wood, plywood, chipboard and fiberboard, cardboard, veneer and laminate.

It is allowed to work with the composition at temperatures above 10 degrees and a relative humidity of no more than 80%. When working at low temperatures, the glue may lose its high adhesive properties, and the gluing will turn out to be of poor quality. Average material consumption is about 150 grams per square meter of surface. The dried composition is compatible with all types of paints and varnishes, therefore, if necessary, the glued thing can be painted or varnished.

High consumer demand for Moment Stolyar glue is due to a number of positive properties of the material.

• The moisture resistance of the glue allows you to use the items glued by "Joiner" in conditions of high humidity.
• Due to its good heat resistance, the glue is able to withstand temperature loads up to 70 degrees. This is very convenient when working with veneered elements that require heating during installation.
• Excellent adhesion and short setting times allow for a fast, strong and durable joint. "Joiner" refers to express trains, therefore, working with it significantly reduces the repair time.

• The time for complete drying of the butt joint is no more than 15 minutes.
• Durability of the connection. The glued surfaces will not lose their adhesion reliability throughout the entire service life of the repaired product.

TO disadvantages include low frost resistance of the composition and certain requirements for the moisture content of wood: it is necessary to use the repaired products at positive temperatures, and the moisture content of the tree should not exceed 18%.

In the modern household chemicals market, the model range of joinery adhesives is represented by five series, differing from each other in composition, conditions of use, time of initial setting and complete hardening.

"Moment Joiner Glue-Express" - a universal moisture-resistant agent produced on a water-dispersion basis and intended for gluing wood of different species, as well as fiberboard and chipboard, veneered products and plywood.Full curing time is from 10 to 15 minutes and depends on the ambient temperature and the moisture content of the wood.

The adhesive has high moisture resistant properties, does not contain solvent and toluene. The product is suitable for working with paper, cardboard and straw, which allows it to be used instead of stationery glue for making crafts and appliqués. After applying the composition, the working surfaces must be pressed tightly against each other. This can be done with a vice. Also, products can be crushed by a book or other heavy object.

The product is available in tubes weighing 125 g, in cans of 250 and 750 g, as well as in large buckets of 3 and 30 kg. You need to store the glue in tightly closed containers in a temperature range of 5 to 30 degrees.

"Moment Joiner Super PVA" - the optimal solution for gluing wood of various species, laminate, chipboard and fiberboard. The glue is available in red cans, has a transparent structure and is practically invisible after drying. The moisture resistance of the material corresponds to class D2, which allows it to be used in dry and moderately damp rooms. The joinery is suitable for working with laminated plastics, straw, cardboard and paper, which allows you to carry out crafts together with children without fear of harmful effects. Complete setting of the solution occurs after 15-20 minutes.

"Moment Joiner Super PVA D3 waterproof" - a universal assembly compound capable of withstanding repeated freezing-thawing, intended for gluing wood products and laminated surfaces. The water resistance limit is determined by the DIN-EN-204 / D3 index, which indicates the high moisture-repellent properties of the material and allows the use of products repaired with it in high humidity conditions. The product has proven itself well in renovation work in kitchens, bathrooms, lavatories, and also as an assembly tool for gluing parquet and laminate flooring.

"Moment Universal PVA Joiner" - glue on a water-dispersion basis, suitable for gluing elements made of any wood species, MDF, fiberboard and plywood. The product has a short full-setting time, a transparent structure and does not leave colored or cloudy stains on the wood. The initial initial setting force is 30 kg / cm2, which characterizes the excellent adhesive properties of the product. The main condition is that the surfaces to be glued must be firmly fixed within 20 minutes. Adhesives on a water-dispersion basis have in their composition a strictly defined amount of water, therefore, it will not be possible to additionally dilute the agent to increase the volume, otherwise the proportions will be violated, and the mixture will lose its operational properties.

"Moment Joiner Instant Grip" - a universal moisture-resistant agent made on an acrylic water-dispersion basis, intended for any wood. The initial setting time is only 10 seconds, which refers to the composition as a second adhesives and requires careful use. The solution is easy to apply and leaves no residue. The product is excellent for gluing wood to metal, PVC to plastic, withstands up to five short-term freezing cycles.

Glue "Moment Stolyar" is produced in convenient packaging, which is represented by tubes, cans and buckets. The tubes have a 125 gram filling and are suitable for small home furniture renovations. Due to the special structure of the tube, it is possible to control the consumption of glue, as well as to store the remnants of the product until re-use. For repair work of medium volume, cans are provided, the volume of which is 250 and 750 g. The tight lid also allows you to store the rest of the funds until the next time.

Large furniture factories purchase glue in buckets of 3 and 30 kg. A sealed lid, which allows you to keep the remains of the composition for a long time, is not provided in them.But, given the volume of production of furniture shops, there is no need for such storage. The weight of packages of glue "Instant grip" is 100 and 200 g.

Carrying out repair work using Moment Stolyar glue does not require special knowledge. You just need to carefully read the instructions and strictly follow all the recommendations. Before applying the adhesive, it is necessary to carefully prepare the working surfaces by removing the residues of dust, chips and burrs from them. If necessary, sand the parts to be bonded at the butt joint. Wooden elements should clearly match each other in configuration. To determine this indicator, it is required to carry out a preliminary dry fitting and, if necessary, adjust the parts.

Apply glue to both working surfaces in a thin even layer with a soft brush. After 10-15 minutes, the elements should be connected using maximum effort. After the installation is completed, the excess glue is removed mechanically. Then the glued structure must be placed under the oppression. You can use a vice. After 24 hours, the repaired product can be used.

When working with the "Instant Grip" composition, parts should be joined with special care. The glue sets instantly, so it is no longer possible to correct an unevenly applied element.

The Moment Stolyar glue is widely known in the Russian construction market and has many positive reviews. Buyers note consumer availability and inexpensive material cost, high adhesive properties and ease of use. They also pay attention to the ability to repair wooden furniture without the need to drill holes for screws, which preserves the aesthetic appearance of products. The disadvantages of users include poor adhesion of the composition on a loose wood structure and the speed of curing of the "Instant Grip" glue, which excludes further adjustment of the position of the parts.

What kind of glue is better for gluing wood is described in the video.