Propagation of milkweed at home

Among the huge selection of indoor plants that are grown all over the world today, it is worth highlighting the euphorbia. Culture is in demand due to its external attractiveness, in the light of which many growers propagate the culture on their own. Today there are several options for obtaining a new plant, so each flower owner will be able to choose the most suitable one for himself and his plant.

Euphorbia belongs to the family of plants of the same name, of which today there are about 2000 species, while the bulk is successfully cultivated at home. Today you can find the beautiful mirsinites "Alpinist", multiflorous or cereal euphorbia, which is actively grown by flower growers all over the world.

The plant is a perennial, and its main name is due to the presence of milky sap inside, which is released upon contact with freshly cut parts. In light of this peculiarity, working with the culture, including propagating it, should only be done with gloves, since the juice, in contact with the skin and mucous membranes, can provoke a burn or severe irritation.

However, it is not only the milky sap that distinguishes the culture from other indoor plants. In the process of growing, many flower growers have a desire to propagate the flower they like on their own, which implies the choice of the optimal time for such work. There are a number of recommendations regarding the reproduction of milkweed, depending on the season, method and growth phase in which the culture itself is located.

• It is recommended to propagate a houseplant using the seed method at the end of summer. This is due to the fruiting phase that spurge enters during the summer months. As a rule, the culture ripens boxes with seeds, ready for subsequent germination.

• A perennial is propagated by cuttings or by dividing the mother plant in early or mid-springin order to have time to separate the planting material from the plant before the active growth of the milkweed begins. The choice of such a time is not accidental - this way you can exclude the possibility of a stressful situation, in the light of which the plant can get sick or die. Some growers prefer to divide the perennial in early fall to give the young crop more time to adapt and take root.

In order for the young spurge to actively grow and develop, it is necessary to thoroughly approach the issue of choosing a soil for culture. A perennial can grow at home in ordinary garden soil, but experienced florists still recommend cultivating a flower in a special soil.

You can also prepare the land for cultivation with your own hands. In this case, you will need 1 part of sod soil and sand, 2 parts of leaf land and 1 part of a peat mixture... In addition to the soil, planting grown crops in different pots is required with mandatory drainage at the bottom of the container, which may consist of expanded clay or small pebbles.

Today, indoor spurge is propagated in several ways.

This method is considered the easiest and fastest planting option.However, this method will not allow the varietal characteristics to be preserved in young crops, which may be unsuitable for growers who plan to propagate plants of a certain variety for subsequent sale. The process itself involves the implementation of a number of actions.

• Planting material can be collected by yourself from culture or purchased in a store. In the first case, it is worth choosing an adult perennial for reproduction. The seeds should be tight, not damaged, not overdried.
• Deepen them into wet ground, several seeds should be taken for one pot. The planting material just needs to be pressed a little into the ground. In order to grow euphorbia from seeds, you need to make a greenhouse for them, as a rule, the pot is covered on top with glass or polyethylene. Another option would be to place a plastic bottle without a neck on top.
• Cultivation of crops from seeds should be carried out at an air temperature in the room not lower than + 20 ° C... In addition, there should be enough light in the place where the containers will stand.
• When the first shoots appear from the ground, the covering material or the bottle can be removed. It is necessary to water the plants as the soil dries up. It is best to use a spray bottle for these purposes. It is possible to root crops separately at a time when the sprouts are sufficiently strong, and 2-3 young leaves will appear on them.

You can successfully propagate a perennial at home by cuttings. The method is quite simple, so it can be used even by novice growers.

Cutting milkweed involves several steps.

• From a healthy plant, it is necessary to take a shoot from the very top. The optimal length of the planting material will be 10-13 centimeters. Before further manipulations with the culture fragment, it must be washed under warm running water in order to wash off and stop the release of milky juice. The place of the cut at the top of the plant and on the cutting is processed with chopped charcoal. After that, the stalk should dry well, as a rule, 1-2 days will be enough for this.
• Further, the collected material is rooted in a small container with earth, after which the soil must be well moistened, and the plant itself must be covered with a film to create a greenhouse.
• Caring for cuttings will be reduced to maintaining the air temperature at + 20 ° C and good lighting. As practice shows, the collected planting material will take root in the container in 2-3 weeks from the moment of planting.

Perennial refers to crops that can be propagated by dividing the mother plant. It is important that the selected succulent has a healthy root system and several trunks. This option is more preferable, since the separated parts adapt much faster to new conditions and take root in a separate container.

The work algorithm will include a number of sequential actions.

• An adult euphorbia must be removed from the pot.... Remove the soil at the rhizome, and you should also perform a visual inspection of the root system: if there are damaged roots, cut them off the succulent.
• Next, you need to carefully divide the rhizome into several parts. The optimal amount is to obtain from 2 to 4 new plants, depending on the size of the milkweed. Dividing a succulent is best done without using any gardening tools or knives. If it is not possible to perform the operation on your own, they should first be disinfected before using sharp instruments. During the division of the culture, it is necessary to separate the parts in such a way that at least one formed shoot is present on each new plant.
• Culture manipulation will also provoke the release of milky juice, therefore all work should be carried out with gloves. All parts obtained should be rinsed under warm water and then dried indoors for several days.
• After a lapse of time, when individual parts of the perennial are slightly pulled up and cease to emit milky juice, each crop must be rooted in a separate container with a substrate for succulents or cacti.

After reproduction of milkweed by any chosen culture method, it is necessary to ensure maximum rest. In order for the plant to take root faster and begin to grow well, it should correctly choose a place in the house or apartment for placement. Culture needs a lot of light, but without contact with direct sunlight. Young spurge can be placed on windowsills on the south side even in summer, but at midday it is better to create partial shade for the succulent to avoid burns. If the culture grows from the north side, then in the winter months it may need additional lighting; phytolamps are used for these purposes.

Euphorbia does not like high humidity and abundant watering, since excess liquid can provoke rhizome decay. Signs of excess moisture in a pot with a young crop will be a change in the color of the milkweed from green to pale, and the flowering will also be short-lived. Watering should be abundant only in the phase of active growth of the perennial and during the dry season.

With the arrival of autumn, moisture can be corrected so that it becomes less intense and frequent, however, complete drying out of the soil must be avoided. The growth of a young crop can be negatively affected by tap water with a high chlorine content. During the heating season, euphorbia can be moistened with a spray bottle.

When growing spurge indoors, you should avoid sudden changes in air temperature. The optimum temperature throughout the year will be from + 18 ° C to + 22 ° C. In the warm season, a succulent plant can be kept on a balcony or veranda.

In the spring months, flower growers are advised to use liquid foliar fertilizers intended for such decorative indoor crops. You need to feed the plant no more than once every 3-4 weeks in the spring, in the summer you should fertilize the spurge twice a month. In winter, top dressing is not recommended. Depending on the variety, the milkweed may need pruning to form the crown of a perennial bush. And also care involves the removal of faded buds and dried leaves.

Young succulents will require an annual transplant, during which you need to change the pot to a larger one. For a plant, the soil is selected depending on the variety. Flowering and ornamental crops can be grown in a versatile substrate, as for thorny varieties, succulent soil will be suitable for them.

For the reproduction of milkweed (euphobria), see the form below.