All about furniture board tables

Wood is an ideal material for making practical and solid furniture, but over time, under the negative influence of sunlight and humidity, it begins to deform and crack. Furniture panels are devoid of such disadvantages. From them you can make with your own hands not only high-quality cabinets, but also countertops, which, if properly used, will last for more than a dozen years.

The board table is a stylish piece of furniture that fits perfectly into the interior of kitchens and living rooms. Furniture panel can be made from different types of wood, most often larch, walnut, birch, ash and pine are used for production. At the same time, oak products are considered the most durable and durable. These tables have many advantages.

• Environmental friendliness. Furniture panels are produced from solid wood and do not contain toxic components.
• The ability to make your own countertops. The material is easy to process, this allows you to create elements of different sizes and shapes from it.
• Easy to operate and maintain. Furniture is not demanding to maintain. The tables can be restored if necessary.
• Affordable cost. Compared to analogs made of natural wood, these tables are much cheaper.

Due to the variety of wood species used in the manufacture of panels, the products are perfectly combined with any decoration in the room.

Products made from furniture boards are distinguished by their solid appearance. Most often, tables are made from them, which, depending on the purpose, can be subdivided into certain types.

• Kitchen (dining). For the production of such tables, larch, ash or oak boards are used. They have high hardness and good quality. Soft wood is not suitable for manufacturing, since dents will appear on it with constant use. If you plan to make your own kitchen table, then you should choose shields at least 24 mm thick. The optimal dimensions of the countertop are: depth - from 600 to 800 mm, height - from 850 to 900 mm, length is determined depending on the dimensions of the product.

• Magazine, computer and bedside. Since such structures do not experience large loads, they can be made from shields of small thickness. To make a coffee or computer table with your own hands, you will need to decide in advance on its shape and size. To give a beautiful look to the product, coating the supports and the base with a primer will help. These tables can be placed in living rooms decorated in modern, loft and minimalist styles.

• Written. This type of furniture has a complex structure, equipped with facades, drawers and shelves. Making a desk on your own at home is more difficult, since you will need to make a lot of parts. This cannot be done without a special tool. Before assembling such a table, it is necessary to draw up a drawing and choose a decorative finish. If it is a children's writing table, then it should be small in size and original design.

In addition, a hanging table with wall mountings can be made from furniture boards.Such a transformer model will take up a minimum of space and will fit into the interior of any room in an original way. The table can be additionally varnished or decorated with self-adhesive foil.

Tables made of furniture boards, made by hand, are exclusive furniture that testifies to the mastery of the owner of the house. To create an individual masterpiece at home, it is enough to have a little experience and a basic set of tools. Furniture panels are easy to finish, so making tables from them is within the power of everyone. To work, you need the following tools:

• a circular saw;
• jigsaw;
• screwdriver;
• drill;
• roulette;
• grinder.

If you plan to make a simple model of the table, then for this you will need a furniture board - 60x160 cm, a bar - 4x4 cm, for large countertops a thicker bar is chosen. To give the product a better look, you also need to have paint or varnish, the legs can be made of metal or balusters. The structure is fastened with self-tapping screws. When the material and tools are prepared, you can proceed to the direct process of making the table, sequentially completing certain stages.

• First of all, the table top is cut. Sawing for the desk is performed according to a previously created drawing. To do this, a cutting line is drawn on the shield and the tree is slowly cut with a saw.

• After that, you need to prepare the bar by sawing it into 4 parts, cutting off an angle of 45 degrees at the edges. The bar is screwed to the structure with self-tapping screws, it will give the table a better look and make it stronger.

• Further, in the places where the legs are installed, it is necessary to screw in the screw-nuts. First, holes are drilled for them, then they are screwed in. The legs are fixed with screwed screws.

• The next step is to grind the table top, since it must become smooth before finishing. Then the table top is covered with varnish, for the best effect it is applied in two layers.

After the varnish has dried, the table is ready.

For information on how to make a furniture board, see the next video.