Finishing options for OSB boards indoors

OSB boards are in great demand as an interior and often exterior decoration of premises. There are several grades of this material on the market. However, installation is not a final task, since the panels need to be coated with something to give them a presentable appearance. For this, a variety of options are used, each of which has its own characteristics. We bring to your attention the most common methods of wall cladding inside the room from OSB panels.

OSB boards are made from wood chips, which are mixed with adhesives or resins, so they have a natural structure. Of course, many people like this finish, but if you want to come up with an interesting interior, you should consider other options.

But you can use special paints, or decorate the sheets with wallpaper or even ceramic tiles.

If you choose a cladding material, you should remember about the main feature of OSB boards - the presence of impregnation from resin, paraffin and wax. These ingredients are not combined with all finishing agents. Therefore, the main rule is a primer, which is carried out at the initial stage of facing walls, floors or ceilings from sheets.

It should be noted that lumber is offered sanded and unpolished. In the latter case, you will have to use a special apparatus or grinder with a grinding wheel to make the surface smooth without a single chip. As for the ways to decorate your home, then you can find out about a variety of options that can attract your attention.

If the OSB panels are already mounted, it is necessary to check their integrity and make sure that nails or screws do not protrude on the surface. It is also important to eliminate any defects, to patch up cracks and gaps in order to achieve evenness and smoothness.

Therefore, you should use a doboinik so as not to damage the wall sheathing. The next step is priming the surface, which will give the material adhesion, which is an important factor for using varnish. After the first coating with a primer, it is necessary to check whether the surface has become fluffy, since often at this stage of processing the sheet material can become that way. But this is not a problem, if you have sandpaper on hand to eliminate the flaw, then you need to cover it with another layer of primer.

There are two variants of varnishes on the market, one of them is made on the basis of alkyd, and the other is based on acrylic. Therefore, when choosing a coloring agent, it is necessary to know the percentage of humidity in the room where the cladding will be carried out. Many craftsmen recommend acrylic varnish, which will give reliability and aesthetics to OSB panels. It is necessary to cover in two or sometimes three coats to achieve a beautiful shade.

Lacquer finishing does not attract everyone, since it does not hide the natural structure of OSB boards, so you can explore alternative options that are in great demand and are offered in a wide range.

You can ennoble the partition of OSB boards with paints, besides, this is one of the easiest finishing methods in terms of labor intensity. The plates have minimal adhesion, and therefore the coloring composition will not adhere well, so you should choose the right product for facing. To extend the service life of such a finish, you must follow the recommendations of specialists.

There are different types of paints on the market that can be used in this case. First you need to familiarize yourself with their characteristics in order to choose the option that is suitable for certain conditions. The main task is good adhesion to the surface of the OSB board.

You can start with acrylic dispersed paints, which contain polyarylates and copolymers. Thanks to these ingredients, the coating will form a protective film against moisture. With this tool, you can cover the premises not only inside, but also outside. The composition is ecological, moreover, the wood will not be afraid of moisture and you will not need to spend a lot of money on the material because of the democratic price.

The decorative layer is created by polyurethane paints, which are often used by craftsmen during construction and finishing work. The material has good resistance to negative factors and excellent elasticity, so this finish can be cleaned with detergents. In addition, the composition is non-toxic and suitable for interior cladding.

If you need something more stable, you can consider alkyd dyes, which, after drying, create a film surface. Such funds are also not harmful, while perfectly protecting the material from the effects of moisture and ultraviolet radiation. After application, the paint dries quickly and does not fade, however, during the coating itself, it is necessary to ventilate the room well because of the pungent odor.

Oil-based paints are thicker, therefore they immediately form a thick layer on the surface of the panels. Such a finishing material is used for the end sides of the sheets to protect them from moisture. It should be noted that the paint has a specific aroma that will remain for a long time after application. In addition, it will take more time to dry, which should be taken into account.

There is a great demand for universal paints that can be used to cover different types of wood. But you can choose a paint specially created for finishing OSB panels, such can be a paint-primer, which has many advantages. In particular, the ability to create reliable protection against external factors. The composition contains substances that increase adhesion to the surface of OSB boards. The main advantage is vapor permeability and elasticity.... Due to the density of the material, the natural color of the panels does not shine through. Thus, with the help of OSB sheets, you can sheathe a room, and use paints to make a finishing finish, decorate any surface, creating a unique design of the room.

If you want to preserve the texture of the slabs, it is better to use a small-grain emery tool for cleaning. TThis will prepare the surface for bonding agents. However, it all depends on how smooth you want the slab to be. Next, you need to make sure that the caps of the self-tapping screws are recessed, they should not protrude. The gaps between the panels must be closed with putty, some craftsmen choose elastic tape.

Sometimes priming is carried out with varnish, which is diluted with ordinary white spirit. When painting a large area, it is recommended to use a paint roller to speed up the process. But there are other finishing methods so that the slabs change beyond recognition, and the joints were not even noticeable.Such a surface will look as aesthetically pleasing and presentable as possible.

This option also attracts many, therefore OSB boards are used in order to get a flat surface and provide convenient pasting. To begin with, the sheets also need to be primed, it is recommended to do this twice, and also to walk with a grinder. Make sure that the previous layer is frozen, and only then proceed to the next one. Once everything is well dry, you can glue the wallpaper in the traditional way. However, in order to ensure good adhesion, the boards can be coated with interior paint.

Puttying walls from OSB boards is in demand when you need to get a universal decor in a warm or cold room... Thanks to this facing material, you can come up with any design, showing all your imagination. The putty must be applied exclusively to the cleaned surface.

An alternative option would be bodywork putty when it comes to a moving object. The composition has excellent bonding properties, it is lightweight and will not deteriorate over the years. After preparation, you can apply a layer of putty, then it remains to prime the surface. This cladding method attracts with its versatility and the ability to create interesting patterns.

As for the tile material, both tiles and ceramics are suitable here. The finishing method is the same, you will need a special glue, based on substances that interact with wood... When installing panels, you must always remember that the dimensions can change due to the influence of moisture, etc.

Summing up, it is safe to say that there are a lot of options for finishing OSB plates. This allows each consumer to choose not only the optimal way of cladding, but also to embody any of their interior wishes, creating beauty, presentability and high-quality coating. As for which material is considered the best, there is no definite answer, because each of the described products has its own characteristics and distinctive characteristics that should be taken into account. The most important thing is to determine the composition that will become safe and reliable in a room with certain conditions. In this case, you will be able to choose shades, textures and fade patterns.

See the video for decorating OSB plates.