How to tie up raspberries for the winter?

Raspberries are a delicious berry. In order for the bushes to bear fruit well, you need to learn how to tie them up correctly. Then the plant will delight you with sweet and beautiful berries. In addition, after the garter, you can continue not to worry about the branches breaking off and the fruits being crushed. We will talk about how to properly tie the plant up below.

To become a real summer resident, you need to learn how to tie up raspberry bushes. Then the pastime in the country will become more useful, since you will get a good harvest and will be able to prepare excellent jam for the winter. By the way, raspberry sweetness is a very good remedy for colds. The perfect bush tie is the key to your future success. So you can count on large berries.

There is another reason: raspberries often have very flexible and brittle shoots. They can be damaged, so they are strengthened by tying them to stakes. Raspberry bushes can also break off and die due to:

• strong wind;
• abundance of precipitation;
• the severity of the berries;
• the fact that some bushes grow more than 2 meters.

In addition, keep in mind that if you tie up raspberry bushes, then you can easily pick ripe berries and not scratch your hands on thorny shoots.

Raspberry is a rather unpretentious plant. However, by tying up the bushes, you can count on the following:

• raspberries will be protected from pests, diseases and various infections;
• newly appeared shoots will receive huge advantages for full development and will not die out due to the lack of sunlight;
• the berry will ripen evenly;
• you will harvest the maximum amount of the crop.

Of course, any business must be approached in a responsible manner. So the following tips will come in handy.

• If you have just planted seedlings, then for the first year do not touch them and do not carry out any manipulations. Let the growth harden well. At the end of the season, you will see your raspberries take on a hedge-like appearance.
• When the raspberries are one year old, remove any shoots outside the hedge. Let the rows become even. Then remove unnecessary shoots between the bushes. Let the remaining growth grow freely. The distance between the stems should be approximately 25 cm.
• Please note that you can use any material for holding the garter. If you do not have special slats at hand, then take ordinary strong wooden stakes for a garter. The main thing is that they are well processed and do not cause mechanical damage to the raspberry branches.

You need to understand that not all raspberry varieties respond positively to garters. Typically, these varieties include those whose branches grow straight, and the stems are very thick. Let's list the names of these plants:

• Spirina is white;
• "Modest";
• "Coral";
• "Balm";
• "Ruby Bulgarian".

It is necessary to tie the berry in the spring, immediately after the removal of the shoots. Remember to have time to complete all procedures before bud break. The raspberry garter can also be carried out in the autumn, after the bushes have shed their foliage.By acting in this way, you will protect raspberries from cold, strong winds, etc.

In order to protect the bushes from freezing in winter, you need to tie them up so that they are covered with snow. To do this, place the strapping material 25 cm from the ground. To secure the garter, use ingredients that will not injure the raspberries.

You need to learn how to properly tie up raspberry bushes so that the plants do not die. This will be required both in the south of the country and in Siberia, and in the Urals, and in other regions. Thus, you will ensure the correct development of the seedlings, and they, in turn, will thank you with a delicious and abundant harvest. There are different ways. Let's consider them in more detail.

The kolova (or the so-called beam) method is considered by gardeners to be the simplest. And if you cannot use other methods for some reason, then use at least this one. You do not need to know certain garter rules to perform the bundling method. It is enough to take a 2-meter rail and a rope.

How to proceed:

• drive the rail into the center of the bush;
• then collect the stems together in a bunch, and spread their upper part in both directions.

Nevertheless, the staking method is not very popular among experienced gardeners. And all this happens due to the fact that such actions do not guarantee a good harvest. In addition, this garter method also has its very significant disadvantages:

• very often the stems break off or are injured;
• the stems are compressed, which means that they do not develop well;
• raspberry sprouts don't get enough light.

Due to the fact that with this method the raspberry bush is poorly ventilated, the following negative manifestations may appear between the associated branches: mold, pathogenic microbes. In addition, pests can spoil the bush.

This method is so called because the raspberries are tied up with a trellis. It is the most popular because gardeners in most cases get a good harvest with it. But before applying this method, you need to figure out what a tapestry is. This is a device that consists of a strip (in most cases, wooden) and strong wire.

The slats must be driven firmly into the ground along the entire row on both sides. Then cover this entire structure with strong wire and secure the bushes. And now we will consider what types of garters of bushes are with the help of a trellis.

• On one trellis. It is used where there are small areas with raspberries. Wooden slats are driven in along the edges of each row with raspberries and thus the entire row is wrapped with wire. The result is a horizontal design. It allows each bush to get enough sunlight and provides proper ventilation.
• A 2-trellis garter or a so-called pistol can be made using 2-meter wooden slats. They must be installed vertically every 4 meters. Then, between the vertical slats, you need to fix 2 more slats across. Then you need to pull the wire, which should be in a transverse position, in contrast to the installed rails. Then you can safely proceed to the raspberry garter. It is produced by this method: we fix the branches in two places, spread their tops to the sides and fix them. This way, the raspberry bushes will get enough light. The only drawback of this method may be the following nuance: harvesting will become difficult for you due to the fact that the branches will scratch the skin of your hands.
• And then there is the Scandinavian method... This principle provides for pulling the wire on 2 trellises at once. They are installed in the form of a spear near each bush. And then they act like this: the processes are not tied up, but simply twisted the wire around them so that a figure in the form of a slingshot is obtained.

This method is also quite popular, as it is very effective. Many people use it even though it is relatively complex. In the case of a fanned raspberry garter, you will have to devote quite a lot of time to each individual shrub. In addition, here you will need to take a lot more rails. On the sides of each bush, two stakes 2 m long are driven in. Then each bush is divided into 2 parts and these parts are individually tied to the rail. The result is something that looks like a fan.

This method is popular for the following reasons:

• fruiting branches do not interfere with the growth of processes that have reappeared on the bush;
• the plant more than receives sunlight and heat;
• air circulation occurs;
• easy to harvest;
• the yield increases significantly.