Construction goat: features, types and subtleties of choice

Construction and renovation work is greatly facilitated by fixtures such as trestles and scaffolds. These auxiliary structures are characterized by strength, stability, which allows them to withstand heavy loads.

A construction trestle is a special universal type of fixture that is used both in construction work and in the domestic sphere. In another way, they are called scaffolds. The main area of ​​application of the devices is construction and repair work at low heights. The structure consists of a frame, which includes two supports and a crossbar between them.

The most common material of manufacture is pipe shaped metal.consisting of an alloy of aluminum as well as wood. Some models can withstand loads of up to half a ton. Operation takes place in pairs, a working platform is installed between the goats, where the person is located. The decking also has ample room to accommodate work equipment.

The advantages of these structures for carrying out numerous works include the following:

• withstanding heavy loads;
• ease of use;
• no interference during work.

The disadvantages of a construction goat include the lack of built-in devices for the safety of the worker, therefore, if used improperly, unpleasant situations associated with falls or injuries may arise.

Thanks to modern possibilities and technologies in stores, you can buy scaffolding of various types. These structures can have different sizes, assembly method, production material, and also be equipped with different additions. The first type is considered to be ordinary building scaffolds. They are produced like stools, but with a more advanced technology. This type of construction belongs to folding, since it can be disassembled into separate elements. In this case, the working floor is considered the largest part.

Modern versions of construction trestles have decks that can be installed at various heights. This became possible due to the features of the sidewalls, which look like stairs. Usually, these devices weigh a lot, since they are designed for the work of several people at the same time. The dimensions of this design are considerable. A professional construction goat has the following dimensions: 150 (200) cm - width and 180 cm - height. This design option is ideal for working on large objects, but for an apartment it is considered quite cumbersome. Often a ladder, a stopper, wheels with stoppers are included in the package of a construction goat.

The second type is the transformer. It is the ideal homework fixture and is quite compact when assembled. The main characteristics of this type of construction goat include light weight, practicality, ease of use and transportation. Due to the design features, this option can be used not only on a perfectly flat surface, but also when sloping and even on steps. Such scaffolds are often used as an alternative to stairs.

Transformer scaffolds have a height of no more than 100 cm, a width of 50 cm.When unfolded, the dimensions are no more than 160 cm, and when folded, the goat can easily fit into a car trunk. According to the material of manufacture, construction goats are divided into aluminum, wooden and combined. Also on sale you can find painting scaffolds with dimensions of 50 by 100 cm.

The choice of construction goats should be taken with special care, since the safety of the worker and the quality of the procedure depend on their quality. Wooden structures are an inexpensive option, but at the same time they are not as durable and have a lot of weight. The most popular is the metal goat, as it is more reliable and has a long service life. Also, metal structures can be mobile, this characteristic affects the cost.

After the consumer has decided on the material of manufacture, you can proceed to the design features. If the construction of a new building is planned, then it is worth giving preference to the stationary option. Such goats are hardly transported from place to place, therefore they are used only for long-term work. The frame version is suitable for construction and installation of any complexity. These devices are lightweight and easy to install. But if the building has a complex geometry, then it is better to refuse this option.

The most popular option according to consumer reviews are pin construction goats. They are composed of a rack, crossbar, ties, shoes, connection nodes. This type has a simple production technology and an uncomplicated type of design.

The most practical and inexpensive option for a construction goat, which can be made with your own hands, is a folding wooden one. It takes up a minimum of space, and can also be used when working in the country, in an apartment. The first thing to decide with is the height of the legs, it is equal to the height of a person minus 10-12 cm. You can arbitrarily determine the number of spacers and the bar section.

The upper ends of the frame can be connected using door-type hinges. Consider a stopper to secure the legs. A couple of pieces of rafter tape are taken, then fixation is carried out on the spacers at the bottom. The distance should be made in such a way as to maintain the stability of the structure. To fix the elements with each other, you can take nails and then bend them on the back. But in order for the device to be characterized by practicality and reliability, it is worth using self-tapping screws.

The next step is to prepare the site, the dimensions of which should be chosen according to your preferences. It must be able to withstand from 150 to 170 kilograms, and its dimensions must be selected in such a way that the device can easily pass through the doorway. The approximate width of the site should be 0.7 meters. To acquire a high-quality construction goat, you will need to prepare no more than 150 centimeters of edged board.

Detailed assembly instructions.

• Marking is made on the legs, and the excess tree is cut at an angle on both sides. In this case, do not forget about the parallelism of the cuts.
• Using one leg as an example, it is worth making the rest.
• A check is made to see if the upper ends are at an angle of 90 degrees.
• Future spacers are marked with angles of 80 degrees at one end and 100 degrees at the other.
• After preparing the blanks, it is worth cutting a place for the top board on them.
• The legs must be connected in the form of scissors, after which the axes of rotation must be drilled in them. In the latter, it is worth not fully tightening the bolts so that the legs can open and close.
• Spacers are made between the prepared legs. You should have two spacers on the wide side, one on the narrow side.A tie strap must be attached to them from the underside.
• After one support is ready, you can start assembling the second.

Many construction and repair work is related to height, as the worker constantly has to stretch. A ladder and a stepladder restrict freedom of action, but a building goat is a completely different matter.

You can see how to make construction goats with your own hands in the next video.