All about forms for stucco molding

The history of the emergence of stucco molding is about 1000 years old, each nationality with the help of such an element emphasized its own design style. Stucco molding visually adorns the internal and external facade of the building, giving it an aesthetic and sophisticated image. Also, with the help of such a decorative technique, various connections, communications and water pipes are hidden.

Stucco molding today - one of the best decorating techniques.

Virtually any part of the house is subject to installation. However, during installation, it is worth paying attention to all the details, otherwise they can give rise to problems (cracks, premature discoloration). The following advantages of stucco molding are distinguished:

• quick installation;
• practicality;
• wide range of decoration styles;
• water resistance;
• durability.

Most often people use stucco for decorating ceilings and external facades of houses.

Special tools are not required in the installation, the service life is unlimited, and if you want to update the design, there will be no problems. The overall condition of the stucco molding can be good over the years and look like a brand new finish.

However, the material used in the manufacture of stucco, quickly ignites, therefore, installation is strictly prohibited in rooms with high temperatures - these include the kitchen. And if we talk about the sun, then the product in this respect is quite heat-resistant. Another advantage of stucco molding made from modern materials is water resistance.

Initially, stucco molding was mainly made from gypsum... It was soon replaced polyurethane and polystyrenehowever, they do not apply in all cases. Plaster molding is distinguished by its naturalness. It is molded from traditional clay, which is an indicator of high environmental friendliness. Therefore, when repairing in any room, the material is actually harmless to health. The only drawback is the lack of water resistance, in conditions of high humidity, the material is subjected to further shedding of gypsum.

Modern, technological polystyrene stucco moldings contain polystyrene in their composition, due to which moisture does not interfere with them... This type is mainly used in the bathroom. In such small rooms, the installation can also be done independently, due to which it is possible to save the budget. Polyurethane compounds give the stucco molding light weight compared to plaster products. The advantage lies in elasticity, which allows the product to be shaped with the utmost precision.

By forms, stucco moldings are distinguished by the following types:

• gypsum;

• silicone;

• flexible plastic;

• console;

• for construction needs.

Currently, stucco moldings for construction work are mainly made of plaster material, plastic and cantilever. Such gypsum has a dense consistency and does not require a lot of preparation time. Silicone and plastic molds are great for working with wooden decorations, while cantilever molds are used for installing facade products.

Before choosing the size of the stucco molding, you should take it into account. density and consistency of the composition... For example, gypsum has a more stable molecular system, which is advantageous when working with massive decors.It is best not to make large sizes of silicone stucco moldings, since they can disintegrate with strong mechanical squeezing. Flexible plastic ones will not collapse, but they cannot keep their original shape under physical impact for a long time.

Stucco molding can be made independently at home, the main condition is the availability of special equipment and materials.

Highlight the following list of required equipment.

1. A table with a flat surface. The product will have to dry, any uneven area will lead to poor manufacturing.
2. Film... It should be laid on the table, it should be dense and transparent, since gypsum is a lot of dust, and silicone tends to stick.
3. Set of tools... Spatulas of various sizes, utility knife, narrow brush, stacks, ruler or tape measure.
4. Building plasticineand best of all clay.

You will also need to process the material separating liquid. To begin with, you will need to first prepare a mold for filling the stucco itself. After that, you need to pour hot silicone or clay (proportion of 10 parts of dry material to 7 parts of water) into the mold, while leveling the surface with spatulas. After final drying (after 24 hours), remove the resulting decor.

For detailed information on how to make a silicone mold for stucco molding, see the video below.