Welded fences: design features and installation subtleties

Welded metal fences are characterized by high strength, durability and reliability of the structure. They are used not only for the protection and fencing of the site and territory, but also as their additional decoration.

Like a fence made of any other material, a welded metal fence has its own individual characteristics.

• The main feature lies in the material of manufacture. Today, several types of metal products are used, differing from each other in price and quality characteristics.

• The second feature lies in the fact that all sections of the fence can be connected to each other only by welding. The welding machine can be gas or electric.
• The third feature is the combination of welded and forged products. It is their symbiosis that allows you to create not only reliable and durable welded metal fences, but at the same time make them real works of art.
• The fourth feature of such welded fences lies in their mandatory coating with special anti-corrosion compounds. They allow metal parts to preserve not only their appearance for a long time, but also their quality characteristics.

Among the main advantages of such welded metal fences, experts distinguish the following:

• High level of strength, second only to high quality forged products. Such a fence is rather difficult to break and bend.
• Not susceptible to the negative effects of climate. Even with a sharp and strong increase or decrease in temperature, the fence does not lose its qualities.
• Difficult to straighten under normal conditions.

• Impossible to ignite.
• They have an affordable price, a variety of models are presented.
• Not susceptible to the negative and destructive effects of mold and mildew.
• Long service life.

• The ability to manufacture in a short time.
• Unlike fences made of other materials, a welded fence does not visually reduce the area, does not make it visually closed.
• Such a hedge does not need constant and careful maintenance.

Despite such significant and important advantages, the welded fence also has disadvantages:

• Such a fence is not able to protect the area from dust, dirt and debris from the outside.
• Installation of a welded fence will make it difficult for unauthorized persons to enter the site, but will not allow the area to be hidden from their eyes.
• The metal itself, despite all its strength and durability, is highly susceptible to corrosion.
• It is almost impossible to make such a fence without special experience and tools.

Experts distinguish three main types of welded metal fencing. Each of them must be studied in detail in order to understand which one will meet your requirements.

This type of hedge is considered universal and can be installed in any area. It transmits maximum sunlight to the site, has the lowest possible cost and a simple design. The main feature of such a fence is the possibility of its installation in any territory.

The main advantages of such a fence are:

• low price;
• quick installation;
• practical use;
• lack of care;
• attractive appearance;
• the possibility of using as a support for climbing plants.

Such a welded fence has its drawbacks. The main ones are the uniform appearance of all models and low protection of the territory from dust and debris, as well as stray animals.

Such a fence is also called a profile fence. The fence itself consists of pieces of a shaped pipe, welded together, which is why it got its name. This fence is often installed in crowded places: in squares, parks, hospitals and parking lots.

The advantages of this design are:

• ease of manufacture and installation;
• long service life;
• beautiful appearance;
• providing an excellent view of the surrounding area.

There were also some drawbacks here. The main disadvantages are considered insecurity from outside litter and easy access of uninvited guests to the territory.

Basically, it is a hybrid of welded fences and wrought iron fences. Recently, their popularity has been increasing, since such products have more pluses than minuses.

The advantages include:

• excellent appearance;
• a high level of protection of the territory from the penetration of third parties;
• quick installation;
• long service life;
• the possibility of universal installation. This means that such a hedge will be appropriate in both private and public areas.

If we talk about the shortcomings, then forged-welded fences it is one - a rather high price. Despite the presence of only three types of such a welded fence, it can be made in various versions. There are quite a lot of fencing models today.

If necessary, a welded steel fence can be made with your own hands at home. This requires welding skills. You should also purchase all the necessary tools and materials in advance. At home, it is better to make a wire fence, that is, make a mesh fence or a profile fence. Next, the implementation of the second option will be considered step by step, since these panels are easy to make yourself.

First you need to stock up on the necessary equipment:

• rope and tape measure;
• water, screenings, sand and cement;
• spacers;
• shovel;
• Bulgarian;

• level;
• welding;
• pegs;
• construction mixer or drill;
• reinforcement for the foundation;
• profile made of pipes of a suitable diameter.

All work begins with the creation of a sketch of the future hedge. The drawing is created on paper with an accurate indication of the height and width of each section, as well as the total perimeter area of ​​the entire fence.

The further sequence of actions will be as follows:

• It is necessary to determine the location of the future support pillars. To do this, pegs with a stretched rope are driven in from the border of the site along its entire perimeter. The distance between them should be 2.5 meters.

• It is necessary to dig holes in those places where the pillars will be installed in the future. Their depth should be at least 1 m.
• The pillars are installed in pits, filled with cement mortar. Immediately it is necessary to check their evenness with a level, and if necessary, while the solution has not frozen, correct it.
• Now that the cement dries up, you can start creating the panels. From the pieces of the profile pipe, according to the sketch created earlier, the future elements of the fence are welded.

• You can attach them to the pillars after the cement has completely solidified.
• For better fastening of the supports to the panels, you will need a miniature lattice. The creation of the lattice consists in welding two shaped pipes at the bottom and at the top to each support in such a way that the pipe connects the two pillars. It is to such an additional support that the finished sections are subsequently welded.
• After all the work is completed, all parts of the welded fence must be treated with an anti-corrosion solution, then painted in the selected color.

Finally, I would like to present to your attention useful recommendations, the observance of which will help to preserve the appearance and quality of such a welded structure for a long time.

• If you decide to make such a fence with your own hands, then you should choose a fence that is as simple as possible in design. To create a beautiful fence with a complex structure, you must have not only additional materials, but also certain skills. For the same reasons, you should not try to create your own construct on screw piles.
• It is imperative to ensure that the support posts have protective caps or plugs. They will not allow dirt, debris, dust and precipitation to penetrate inside and destroy the stability of the structure. Usually factory hedges are already equipped with them. If they are not there, then the plugs should either be made by yourself or purchased at a specialized store.

• At least once a year, the entire fence must be treated with special protective agents that will protect the structure from corrosion.
• For painting such welded fences, it is better to choose acrylic paints. Oil paint mixtures peel off and peel off too quickly, which means that they cannot fully protect the metal from various negative influences.
• If the welded fence has forged elements, then it is best to choose pillars with a round or square section as a support. Such fences look especially stylish and beautiful.

A welded metal fence is not just a metal fence. With the right approach to its choice, it can be stylish, beautiful and unusual.

• Low welded fence with forging elements. Such a fence looks modern and aesthetically pleasing. If necessary, you can increase its size and use the resulting fence to protect a larger area.
• The minimalistic mesh fence fits perfectly into the surrounding exterior. It is here that it looks quite appropriate, fulfilling its main function - the division of the territory. At the same time, he does not distract his eyes from other objects around. Such a fence is both visible and invisible at the same time.

• Sectional welded fencing of this type is ideal both for installation in a private area and for installation in squares, parks or hospitals. Discreet, but at the same time, an unusual and beautiful appearance, combined with high quality characteristics, makes such a fence a profitable purchase.
• Another forged-welded fence that has a simple appearance, but also has a twist. The pointed peaks located in the upper part will make it difficult for outsiders to access its territory. This option of fencing will be appropriate at school, in kindergarten, and in the country.

All types of welded metal fences can look stylish, modern and beautiful, and these photos only clearly confirm this. In general, welded metal fences, rather, serve to clearly separate the boundaries of the sites and to decorate them a little. It is almost impossible to hide the territory from prying eyes, to protect the site from strangers with their help.

For the design features and intricacies of installing welded fences, see the following video.