Making outdoor flower pots with your own hands

Content
  1. Advantages and disadvantages
  2. Shapes and sizes
  3. Choosing a material
  4. Master classes
  5. Finishing options
  6. How to arrange a summer cottage?
  7. Beautiful ideas for inspiration

The area around the house is a visiting card of any site. Special attention is always paid to its design. Outdoor flowerpots with a variety of plants are an excellent decor option. With their help, you can create whole compositions of flowers, or place accents throughout the site.

Advantages and disadvantages

Flowerpots as a landscape decor, involving the manufacture of their own hands, have positive and negative sides.

The benefits include:

  • Transportability. Thanks to their easy movement around the territory, you can create new compositions, and during bad weather or in winter, transfer plants to the attic or veranda.
  • The ability to decorate a yard where the ground is covered with concrete or tiles, and planting plants in the ground is impossible.
  • Fencing function. With the help of street containers, you can divide the site into zones, make a cozy corner.
  • The ability to create favorable conditions in each flowerpot for an individual plant: special soil, fertilizer, watering.
  • Low cost. Compared to many other garden decor items, containers are a cost saving solution. Handmade products allow you to do this doubly.
  • Saving space. In containers, you can place not only flower beds, but also cultivated plants, use them instead of beds for growing cucumbers, tomatoes, herbs, berries. This is especially true for small areas in order to save space.

Vases for the street have practically no drawbacks, however, depending on the material, several of them can be distinguished:

  • Fragility. Refers to plastic and wood products.
  • Plastic flowerpots are harmful to health, as they can release hazardous substances into the air.
  • Ceramic products are very fragile.
  • Plants in ceramic and metal containers require frequent watering because the soil dries out too quickly.
  • Great weight. This disadvantage is possessed by products made of concrete and stone.

Shapes and sizes

Outdoor flowerpots can be of a wide variety of shapes, sizes and colors. Making them with your own hands, you can be sure that you will get a product that meets all the required criteria. And its appearance may be due to the material used and manufacturing technology.

When choosing the size for the future flowerpot, you should take into account the space on the site.

In a small area, large, massive containers will look ridiculous and cumbersome. Bulky plant compositions should also be avoided. At the same time, in a spacious area, small, modest containers will be lost and will not fulfill their function of decoration.

The container can be of any shape. It is limited only by technical capabilities and imagination. If the site is planned to be decorated in a certain style, then it is he who will dictate the appearance of the street decor.

Choosing a material

The choice of material is determined by such factors as the cost of the finished product, the peculiarities of its manufacture, the availability of the necessary tools for manufacturing and the skill of the craftsman.Decorative flowerpots for a summer cottage or garden can be made with your own hands from wood, concrete, stone, plastic, ceramics, metal, or from scrap materials.

Wood

Refers to short-lived materials, since on the street the product is constantly exposed to moisture. Such a product must be treated with a special anti-rotting agent. In this case, it can be used for several years. The most common type of container for flowers made of wood is to make it on the basis of a stump. The inner part is scraped out in the trunk, holes are made for drainage, a plant is placed inside. It is better if the earth is first poured into another container, and then put inside the stump.

Concrete or plaster

Simple and inexpensive materials to work with. Concrete and gypsum products are durable, practical and resistant to environmental influences. With their help, you can make almost any shape of the flower girl. However, it will have a lot of weight, so it is better to do it right at the place where its further location on the site is planned. Peat can be added to the cement as a variety when mixing concrete. In this case, you will get a product made of hypertuff, which outwardly practically does not differ from real tuff or sandstone.

Stone

Stone flowerpots are heavy and expensive. They look very presentable and have a long service life. The process of making a container made of stone is rather complicated, so it is better to purchase such a product ready-made.

Plastic

Plastic products are characterized by a short service life and a simple appearance. However, they are inexpensive and come in a wide variety of colors, shapes and sizes. Plastic containers are usually purchased ready-made.

Pottery or clay

Such flower girls are fragile and break easily. A ceramic or clay product can be made with your own hands if the technology is followed correctly, including firing.

Metal

Metal flowerpots are durable and will last a long time. Forged products look very original, although they have a rather high price. The process of making a metal flower pot is laborious and requires special equipment.

Materials at hand

The choice of improvised means for making a flowerpot is limited only by imagination. A flower container can be made from a huge number of usually unnecessary items on the household: tires, bottles, old barrels, carts, baskets, buckets, tires, foam, rubber boots and bicycles. Such products will be distinguished by originality and uniqueness.

Master classes

You can make a beautiful flowerpot from scrap materials.

Made of wood

The easiest way is a flowerpot made from a piece of a sawn tree or stump. Birch is best suited for this. From tools for work you will need a drill and a chisel.

  1. Several holes need to be drilled on the surface of the stump. The more of them, the closer they are to each other, the easier further work will be.
  2. Scrape the inside of the stump to the desired depth.
  3. Place a container with earth in the recess.
  4. Treat the entire surface of the wood with a special anti-rotting agent.

In addition to the stump, you can use ordinary boards or beams to make a wooden flower girl. In this case, you will need a hacksaw and a hammer.

If the starting material is boards, four shields must be put together separately from them and connected to each other. It turns out a rectangular container, which must be treated with a protective agent and decorated as you wish.

If a timber is assumed as a material, the flowerpot is assembled according to the principle of a log house, like a designer.

The bars are cut to the desired size, and on each side, a cut is made to half their thickness.

Then the whole structure is assembled and fastened with nails and screws. The finished product is sanded and coated with a protective agent.

Concrete

On the basis of cement, flower girls of a wide variety of shapes and sizes can be made. For this:

  • It is necessary to prepare a form, most often it is plastic, suitable in all respects.
  • Prepare the mixture for filling the form. It contains cement, agroperlite and peat in proportions of 2: 1: 2. All components are poured into a suitable container and diluted with water to a thick consistency. The mixture turns out to be a lot, it is very difficult to stir such an amount, therefore it is worth doing this in several approaches, dividing the solution into parts. To make the flower container colored, dyes are added while mixing the solution.
  • Line the bottom of the mold with cellophane. The main thing is that its surface is smooth, without folds. Any unevenness will be imprinted on the finished flowerpot.
  • Put the prepared mixture on cellophane. First, fill in the bottom, making it about 5 cm thick. You can use a toothpick or straw to control the depth. Previously, a cork wrapped in polyethylene is placed on the bottom of the future flowerpot in order to provide for a drainage hole.
  • Then lay out the entire remaining surface of the mold with mortar.
  • When the mold is completely filled, it must be left to set for 10 days. If the mixture dries out, it must be moistened with water.
  • Pass the finished container with a metal brush over the entire surface to remove all irregularities, and give too smooth places a slight relief.
  • After that, the flowerpot must be rinsed with water, dried, wrapped in foil and left for about a week.
  • When the product brightens, you can remove the film and put it in the right place. The weight of such a flower girl is very large, so it is better to deal with the process of its manufacture right at the place where it is planned to be found further.

To increase the strength of the structure, a metal frame can be inserted into the concrete layer.

In addition, for the same purpose, crushed fiberglass can be added to the mixture.

From car tires

Unused car tires are a material that often lies idle or is thrown away as trash. They can easily be used to make bright and original decor for a garden or a summer cottage. It is better to choose winter tires without spikes, they are softer and thinner.

To make a flower container in the shape of a flower, you need:

  1. Draw the desired contour on the sidewall of the tire.
  2. Cut along the contour of the part. To do this, you can use a rubber knife or jigsaw.
  3. Next, you need to turn the tire inside out. For this, cuts are made throughout the tire every 5-10 cm.
  4. The pot is ready. It remains to decorate it as you wish, cover it with earth and plant a plant.

From plastic containers

A very simple way to make a flower pot is to use a plastic bottle, barrel, or any other container as a basis. It is enough to cut a hole in it for planting a plant, make several drainage cuts and cover it with earth.

However, in the case of a plastic pot, it is worth taking care of its stability. If the container is small, you can simply cover its bottom with small stones or pebbles. If we are talking about a large container, it is better to make it stationary.

To do this, you need to dig in a metal pin at the chosen place.

The bottom of the bottle is cut off. Then the bottle is "put" on the metal pin with its neck and a little deeper into the ground. The finished flowerpot can be decorated as desired and covered with soil.

From the pipes

The original idea is to use plastic and metal pipes to make flower girls.

The pipes can be installed vertically. In this case, only the upper part is used for planting plants. If you install several pipes nearby, different in height and diameter, you get an interesting composition.

You can install the pipes horizontally by making holes in the surface for the plants.

Such original flower pots look beautiful along paths, lawns, along the perimeter of houses and greenhouses.

Finishing options

For large outdoor flowerpots, you can choose an original decor, which will be the final touch of their design.

The easiest way is to paint the product with paint. You can use one shade for all made flower girls, or you can create a multi-colored composition of all the colors of the rainbow. The main thing is that the planted plants should be in harmony with the color of the painted container.

For plots with old-style houses, artificially aged flower girls are suitable. To do this, they are covered with the selected paint, and a layer of craquelure is applied on top.

In order for the paint to hold for a long time, the surface must first be coated with a primer.

Another way to design an outdoor flowerpot is to decorate it with various materials at hand. The decor can be created from cones, twigs, small stones or pebbles, broken tiles, mirrors or colored glass, creating a mosaic effect. This requires only special glue.

If it spills or stains the surface, it must be removed immediately, otherwise, after hardening, it will be impossible to do it.

After that, the flowerpot must be allowed to dry. If tiles, glass or stones are used as decoration, the surface can be additionally treated with grout to complete the work. In addition to natural stones, you can use artificial ones, which will be ideally matched in size and look more aesthetically pleasing than natural ones.

How to arrange a summer cottage?

When choosing containers for flowers as a decoration for your site, you should first of all assess their safety for people. For example, the so commonly used tires from car tires are not the safest option. They can release toxic substances into the air and be dangerous, especially if the family has small children.

In addition to safety, the flowerpot must meet the requirements for appearance: match the size and style of the site.

Its size should fit harmoniously into the space. In addition, if the house and the entire plot are decorated in a certain style, the flowerpots should correspond to it.

Not all plants are suitable for outdoor pots. To decorate the site with flower arrangements, it is worth considering the peculiarities of their root system, watering and the need for sunlight.

For planting in flower girls, the following plants are suitable:

  • Petunia. These are easy-care flowers of various colors that bloom all summer.
  • Pansies. Their flowering continues for a long time. They are unpretentious, differ in a variety of colors and varieties, grow short, but fluffy.
  • Ageratum. Differs in long flowering and unpretentiousness in watering.
  • Fuchsia. Due to its flowing appearance, it creates the impression of being in a blooming, fragrant garden.
  • Verbena. Suitable for planting in containers, has a modest root system, can be combined with other plant varieties.

Beautiful ideas for inspiration

Here are collected photos with various options for outdoor flowerpots, which you can make with your own hands for inspiration with new ideas and original solutions.

What designers and gardeners themselves have come up with:

  • fabrics, napkins, poured with concrete and frozen forever;
  • rubber boots of bright colors and different sizes as original flowerpots;
  • ordinary bowls attached in rows to a wooden fence or strung on a metal pin like a herringbone or pyramid;
  • you can even build an alpine slide from tires;
  • broken ceramic bowls should not be thrown away, shards can serve as an original decor;
  • old galvanized watering cans, buckets;
  • mosaic from old ceramic dishes;
  • a box of boards with a trellis for climbing plants.

For methods and step-by-step instructions on how to easily and beautifully make an outdoor cement flowerpot, see the following video.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture