Thinner 650: compositional features and scope

The use of paints allows you to achieve a very good result, but even the best coloring compositions sometimes get dirty both when staining and accidentally touching, not to mention the fact that serious mistakes can be made during the coloring process that need to be urgently corrected. This is assisted by solvents, including Solvent 650.

"R-650" contains many components, including:

• butanol;
• xylene;
• alcohols;
• ethers;
• ethyl cellulose.

With this mixture, it is possible to dilute nitro varnish, putty, nitro enamel, as well as adhesives and mastics. The release of "Solvent 650" is carried out in accordance with TU 2319-003-18777143-01. The concentration of water is maximum 2%, and the inclusion of volatile ethyl esters is 20-25%.

The combination of this solvent is colorless or has a yellowish tint. It lights up quickly and has a unique scent. According to current standards, the solvent should not form a solid residue during long storage.

This solvent makes the enamel less viscous and makes it easier to apply with a paint brush. When the paint dries, the active substances evaporate without residue. Shake the container thoroughly before use so that all components are well mixed. The packaging should be free of dust and salt build-up, especially around the neck.

The technical characteristics of the solvent make it possible to combine it with the enamels "NTs-11" and "GF-750 RK". It is necessary to introduce the substance into the prepared paint and varnish material in small doses, constantly stirring the liquid until it reaches a certain viscosity. Under normal environmental conditions, the solvent consumption is about 1 liter per 20 sq. m. When the paint is applied in the pneumatic spraying mode, the costs of "R-650" increase by about 1/5. The exact size is determined by the size of the pores and the roughness.

The composition of the described solvent contains volatile substances that can harm human health. This means that working with it requires the use of special clothing, rubber gloves and goggles, respirators. For information on this protection, refer to government standards, industry guidelines, and regulations. When the mucous membranes of the eyes are exposed to a solvent, it is necessary to rinse the injured area with warm soapy water.

It is important to know that the solvent should only be used outdoors or in an area with very strong ventilation. It is unacceptable to store and use it in the immediate vicinity of open fire, from significantly heated objects and surfaces.

The drug is supplied in the following containers:

• polyethylene cans with a capacity of 5-20 liters;
• metal barrels;
• bottles of 500 g and 1 kg.

Any type of container must be properly closed. To store the solvent, it is required to use a room with a low risk of fire hazard, or rather, areas as far as possible from radiators and other objects subject to heating. Do not put containers with "R-650" where the sun's rays act. It is much more correct to set aside the darkest corners for storage.

This solvent is considered better than 646th, which is used to dilute car body enamel. Application and mixing with other formulations is carried out strictly without smoking, eating, drinking water and medicines.If the standard requirements are met, the shelf life of the mixture reaches 365 days from the date of release, which is indicated on the package. This solvent must not be poured onto the ground, water, or drains. But you can handle the container of the solvent after drying or evaporation of its residues as with standard household or repair waste.

It is possible to use such a composition indoors only on condition that it is completely ventilated immediately after the end of work.

It is necessary to carefully study the reputation of the manufacturer, the ratio of positive and negative reviews, prices and other important points before making a choice. It is also required to find out what is the real proportion of individual components, how many there are, the quality of the solvent and paintwork materials to which they are added. Also, attention should be paid to acidity, coagulation, color, proportion of water. The purchase of this solvent in a PET canister instead of polyethylene helps to save money.

Strictly observing these requirements, the instructions for the solvent and for paints and varnishes, consumers guarantee themselves a successful and quick repair, the most simple removal of stains and paint drips.

For the difference between solvents 646 and 650, see the following video.