Features and varieties of partitions between the kitchen and living room

The kitchen is the very room where each family member spends the lion's share of their time. Various dishes are prepared here, family gatherings are held, guests are welcomed. The main requirement of the hostess is a spacious and comfortable kitchen, equipped with modern elements of technical progress. However, in modern buildings, one-bedroom apartments are presented in the form of studios, in two-room apartments and more, the living room is connected to the kitchen. Here you just have to work hard to make some separation between the rooms, so that the kitchen and living room will become independent rooms.

Before trying to make adjustments to the finished design of the apartment, you should understand and understand whether the installation of a partition between the kitchen and the living room is actually required. It is necessary to weigh the pros and cons. And after that, proceed to the choice of design.

This type of zoning is used in several cases.

• Redevelopment - partitions are installed in the required place, due to which the kitchen space and the living room acquire an independent square. The size of the area of ​​the rooms depends entirely on the selected partition option.
• Additional furniture - it often happens that there are not enough shelves and drawers for the kitchen space. By installing a partition in the form of an open cabinet, this problem will disappear instantly.
• Decorative purpose - in this case, the option of changing the design of the apartment is being considered. Complementing the room with a new piece of furniture or decor, the appearance of the interior changes dramatically.

The main function of the partition between the kitchen and the living room is to divide the whole space into separate rooms. At the same time, a tight connection remains between them. For example, if you separate the living room with an open cabinet, then the kitchen space will be visible through the open shelves. On the other hand, such a design can be very convenient for holding big holidays. A variety of ready-made meals can be transferred to the festive table using the open space of the partition shelves.

It is very important that the installed partition fits into the interior of the house. Therefore, it is required to determine in advance what the features of the separating structure should be. The design of the partition itself should take into account all the subtleties and nuances of the style of housing.

It is important to remember that to install the partition structure a number of requirements will need to be met, especially in cases where the demolition of the walls is inevitable.

• According to the architectural design of the house designers, it is strictly forbidden to dismantle the load-bearing walls. You cannot rebuild them and make wide openings in them. Load-bearing walls are the frame of the building. Violating their integrity, the structure of the building is violated, which can lead to unpleasant consequences.
• In modern homes, it is assumed that the kitchen has electric stoves that do not harm the human body and are considered more reliable in terms of safety.The interior of such houses mostly has a combined kitchen and living room. Their zoning can be done using a bar counter, a small tabletop or a regular cabinet. In homes with a gas stove, it is best to give preference to dense and solid partitions. It can be a monolithic structure with a swing or sliding door.

• Having made a decision on the need for zoning a room, it is important to remember that, according to the technical plan of the room, it is strictly forbidden to rearrange the working area of ​​the kitchen, especially the hob. In the development and installation of the partition structure, it is important to build on the existing standard for the layout of the kitchen room.
• Installation of a partition does not require a permit from a regulatory authority.
• When choosing a design, it must be remembered that the surface of the partition should be easily washed from household waste, especially from the kitchen side. Just one dish can create a lot of greasy splashes and stains that cannot always be removed.

So that the smells of cooked products and the noise from kitchen appliances do not interfere with the residents of the house, it is necessary to install a monolithic partition, decorative options in this case will not help in any way.

Each partition as an element of the interior must correspond to the style and design of the house. The choice will have to be made difficult, since each overlap option has separate functions.

This type of partition is used much more often than others. Its construction is made of durable drywall sheets. This material makes it possible to make false walls in a variety of shapes and sizes. An important advantage of plasterboard floors is ease of installation. This type of partition is environmentally friendly for children and adults. It is ideally combined with other types of materials and is able to absorb noise from kitchen appliances. The affordable construction price will keep the family budget intact. The only drawback of the plasterboard partition is the lack of a moisture-resistant function. Therefore, the surface needs to be covered with several layers of paint.

In modern houses, this version of the partition looks very harmonious and is a multifunctional structure. Quite often, a bar drain is installed in apartments with a minimum square. By its principle, the bar counter can serve as a dining table and an additional work surface. Upper racks allow you to save space in your kitchen.

An important advantage of such a partition is the absence of darkening and the presence of additional possibilities for the working space.

Such a partition will be able to fit into any interior of the house. It doesn't matter if the room is classic or ultra-modern. The main thing is not to be mistaken in the design, construction and colors. You can use such a partition in various ways, for example, compose books there, decorate the shelves with various decorative figurines, place dishes and much more.

An important quality of the shelving is the ability to separate the kitchen and living room.while maintaining the aesthetic appearance of each room. The living room will feel warm and cozy at home, and the kitchen will become the center of culinary creation.

This type of design is more suitable for large kitchens. The doorway can be made according to the principle of a folding accordion, a standard door opening, or a sliding structure, which is used quite often. To increase the visual space, it is enough to open the doors of the partitions, and during cooking, on the contrary, close them tightly. Thus, the smells of cooking products will not get into the living room, and the noise of electrical appliances will not interfere with family vacations.

A modern option for dividing the working area of ​​the kitchen and living room. Correct installation results in an extraordinary design for each room. The incident light rays pass a tipping point on the glass, creating extraordinary illumination. If you do not follow the laws of physics during installation, then the light effect will disappear, and the rooms will get a repulsive cool atmosphere.

It is mainly used in large houses to stylistically separate the kitchen and living room. The glass door can be made in a classic opening, or a sliding mechanism is used. In the manufacture, durable glass is used, on top of which a decorative pattern is applied.

Allows you to use any material to separate the kitchen and living room. This can be curtains, a screen, and even an aquarium. The main thing is that the decorative structure is ideally combined with the interior of the house.

The use of cabinets, dressers and other types of furniture is allowed as a partition. The main advantage lies in the mobility of the interior. At any time, you can make a rearrangement and change the demarcating element of the furniture to another.

To begin with, it is important to analyze a specific room. It is required to pay attention to the lighting in both rooms, as well as to the squaring, in order to understand in which direction it is best to increase the space. Next, you need to understand what exactly the partition should be, for example, a roomy rack or a glass structure.

Having solved the main issues, you need to delve into the details, namely: determine what material is best to make a structure. In what features will be expressed, and what will be the disadvantages.

Quite often, plastic, drywall, glass blocks, wood and chipboard sheets are used for the manufacture of partitions. But the most practical and easy to maintain is drywall. In addition to the low price category, the appearance of the plasterboard partition can be constantly changed.The surface can be painted with any color. On its basis, wallpaper is ideally glued, the film is oracle.

By its characteristics, wood is ideally combined with any interior style. It skillfully emphasizes family comfort and creates a warm atmosphere. In addition, wood belongs to environmentally friendly types of material, which is considered one of the most important qualities.

Considering alternatives to a tree, you can pay attention to chipboard. At cost, it comes out much more economical, but this does not affect the quality of the material in any way.

Glass blocks and simple glass partitions have one important quality, they preserve the lighting of rooms and can even slightly diversify it due to the refraction of direct rays.

Plastic is mainly used for the manufacture of decorative partitions. Such structures do not have additional functions, they only separate the kitchen and the hall for receiving guests. The partition made of plastic material is very light, so it will not be difficult to move it to another place.

To draw up the distinction between the kitchen and the living room, it is enough to connect imagination or pay attention to ready-made options, where you can emphasize interesting solutions for yourself.

In this case, a false wall option is being considered. Quite an unusual design approach to the possibility of increasing the kitchen space. The style is sustained in the severity of the interior.

The classic interior is in perfect harmony with the wooden base of the sliding partition. Original glass inserts help maintain light saturation at any time of the day.

Quite an interesting solution in order to make the delineation of rooms, while not losing the integrity of the room. The light colors of the interior emphasize the presence of the partition wall, but at the same time it is almost invisible in the overall image. Deep and spacious shelves allow you to arrange beautiful decor items that highlight the presence of the rack.

For an overview of the partition between the kitchen and the living room, see the next video.