Ormatek mattresses

Excellent health and good mood depend on many factors, including proper sleep, which, in turn, is impossible without a good quality mattress with an orthopedic effect. These mattresses provide proper support for the spine and allow you to relax. No wonder they are so popular and in demand. Today, many companies are engaged in the production of mattresses, but not all can offer customers such a wide range as Ormatek.

Ormatek has a number of advantages over other companies producing similar mattresses. There are many of them and they are obvious.

Founded over 10 years ago, the company has managed to win and retain customers with its correct approach to production. Modern high-precision European equipment and our own laboratory with a testing center provide a wide range of high-quality products.

Thanks to competent specialists, all incoming materials are constantly being researched in our own laboratory, and in the testing center, finished products are subjected to various test actions. After the selection of the material, fitting to the planned model, the mattress is pre-assembled, subject to various quality checks. Then, the obtained parameters of the tested product are verified against the specified standards. And only after receiving positive results, the products go on sale.

Not only careful selection, control and high-quality equipment are the advantages of the company, but also a huge variety of mattress models.

The assortment includes about 150 models of mattresses, as well as a large number of related products for sleeping. Thanks to the wide assortment, any buyer will find a suitable option for himself. Inexpensive models are sold at a reasonable price (5 thousand rubles), but there are also elite models at a much higher price (60-90 thousand rubles). The price depends on the fillers and the number of springs. In expensive models, there are 1000 springs per square meter, as in the anatomical model S-2000, which precisely follows the contours of the body.

In addition, mattresses and other related products can be purchased in any convenient way. Someone will find it more convenient to place an order through an online store, while someone will prefer to make a purchase in a company salon located in their city, since their geography is very extensive. The materials used in the production of mattresses are not only of high quality and reliable, but also some are simply unique, such as memorix. It is added to both mid-range models and luxury items. Memory foam mattresses guarantee complete relaxation and healthy full sleep, because this material repeats and remembers the shape of the body as accurately as possible. An important advantage of the company is the production of models not only for adults, but also for children.

All mattresses manufactured by Ormatek are classified according to the type of base and filler, shape, size and some other indicators that characterize each group in more detail.

The basis of the mattresses produced by the company is divided into products with springs and models without them. Mattresses with a block of springs are divided into two groups according to the type of fastening of the elements:

• Bonnell dependent spring block is a structure where the elements (springs) are fastened together with a metal wire and form a monolithic block.

• Block of springs independent from each other is the basis for a large number of models produced by the company.In this block, the spring, as a separate element, is placed in the cover and, when compressed, does not affect adjacent elements. Mattresses, based on a block with independent elements, do an excellent job of supporting the spine in the correct position. Mattresses with an independent block of springs are subdivided according to the number of springs per 1 sq. m and according to the degree of rigidity. The number of springs in different models varies from 420 to 1020 pieces per 1 sq. m. The more springs in the block, the smaller the diameter of each element. Products based on a larger number of springs have a pronounced orthopedic effect.

The number of springs is the basis for the series developed and produced. Z-1000 series has 500 springs per 1 sq. m, and in series S-2000 there are already 1020 of them. The last series is subdivided into three lines. Dream - these are mattresses of the classic type with a symmetrical surface. Season line has different hardness of surfaces. Elite Premium line it is characterized by increased comfort, has several layers of filler.

The basis of springless mattresses is polyurethane foam and latex, the rest of the fillers regulate the degree of firmness and comfort. The assortment of springless mattresses is presented in two lines, which, in turn, are subdivided into series, differing in the type of filler and the number of layers in a particular model. The Flex Roll Line is a firm mattress with good spine support. Models of mattresses of this line are based on hypoallergenic Orto-foam latex substitute. Thanks to the special technology, the products of this line can be rolled up for easy storage and transportation.

All models of the Tatami or Orma Line are based on coconut coir and natural latex. The degree of rigidity of these models is very high. Mattresses manufactured by the company Ormatek, in addition to the listed indicators, they also differ in form. The largest number of models has a traditional rectangular shape, but the company also has exclusive mattresses with a round shape. These models are no different in quality from rectangular products. There are models with both an independent spring block and springless options. Such mattresses are intended for round beds.

In order to sleep comfortably and comfortably on the mattress, Ormatek uses various fillers. Thickness, quantity and combinability depend on the degree of rigidity and comfort you want to give to the product. Ormatek company uses in the manufacture of a very large number of fillers:

• For products with a spring block, Ormafoam or polyurethane foam is used. This synthetic material with a dense structure is used as a perimeter fence.

• Coconut coir is a natural fiber, which is impregnated with latex to improve its properties. In addition to the main property (stiffening), the material has many other advantages. This hypoallergenic material with good heat transfer and excellent ventilation has a very long service life. It does not absorb moisture, odors and does not rot, so it will never become a breeding ground for ticks and other microorganisms. Due to its natural elasticity and rigidity, it has pronounced orthopedic properties.

• Natural latex is used in many models. The resilient and resilient latex material is of natural origin. It is obtained from the sap of the rubber tree. This wear-resistant material can withstand significant loads while retaining its original shape. In addition, it contributes to comfortable thermoregulation.

• Memorix - this unique material, consisting of polyurethane foam with special additives, is an excellent filling for mattresses. This material perfectly permeates air and does not accumulate moisture, as a result of which various microorganisms are not able to develop. Thanks to special additives, it has a memory effect, perfectly adapting to the shape of the human body.

• Filler Hollcon used as an additional layer. It is based on polyester fibers. The springy structure of this material is formed by weaving the fibers together. This resilient material has the ability to quickly regain its shape under significant compression.

• Material consisting of coconut and polyester fibers, called Bi-cocos... Used as an additional layer.

• Spunbond is required as a spacer between the spring block and other fillers. This thin, lightweight, yet durable material has the ability to distribute pressure between the springs. In addition, it protects the top fillings from stiff springs.

• Polyurethane foam or modern foam rubber is used in many types of mattresses. This resilient, elastic and practical material is absolutely safe for human health. To enhance orthopedic properties, it is made multi-layered.

• Thermal felt is designed to reduce wear and tear on other fillers. It consists of blended fibers obtained by pressing at high temperatures.

The mattresses of the Ormatek company have a large range of sizes, so that each customer has the opportunity to choose the option that suits him. The most popular sizes are divided into three types. As a rule, furniture manufacturers produce beds in certain sizes. Given this fact, Ormatek company has developed and manufactures mattresses suitable for all types of beds. For standard single beds, the best options are products with dimensions 80x160 cm, 80x190 cm, 80x200 cm, 90x190 cm, 90x200 cm.

The most suitable sizes for one-and-a-half beds: 120x190 cm, 120x200 cm, 140x190 cm, 140x200 cm.The width of 120 cm is suitable for one person, but the width of 140 cm can accommodate two people, so the size 140x190 cm and 140x200 cm can be attributed as one-and-a-half and double products.

Mattresses measuring 160x190 cm, 160x200 cm, 180x200 cm are double versions. The most optimal and demanded option has a size of 160x200 cm. Their length is suitable for almost any height. The product with a size of 180x200 cm is ideal for a family with a small child, who sometimes likes to climb into bed with their parents.

The thickness or height of the mattress depends on the density of the fillers and on the number of layers. The orthopedic mattresses produced by the company have different heights. The sizes range from 6 cm to 47 cm. The thinnest mattress, 6 cm high, in the Softy Plus series is designed for sofas, armchairs and folding beds. The mattress with a height of 47 cm belongs to the elite models. A mattress of this height is based on a two-level support system.

There is a rating, the description of which contains the most popular and demanded models. Among the springless options, the Flex series made from Ormafoam material stands out:

• Orma Flex model It stands out among others for its five-zone surface, which takes into account the contours of the body and evenly distributes the load. The degree of hardness is medium. The maximum load per berth is 130 kg. The height of the side in this model is 16 cm. In the similar model Orma Flex big the height of the side is 23 cm.

• From the Ocean series a new model stands out Ocean soft with a material such as 40 mm Memorix with a memory effect. This model has a side height of 23 cm, withstands a load of up to 120 kg. Also, the model of this series has a special removable cover, the lower part of which is made of mesh, which provides excellent ventilation to all layers of the product.

• Among the options with an independent spring block, the following series stand out: Dream, Optima, Seasom. Dream Series is extremely popular for its fillers and unusual arrangement of springs.
• In the Dream Memo 4 D Matrix the springs have increased strength due to the increased thickness of the wire, each spring is located as close as possible to the neighboring one, all elements are connected to each other only in the central part. In addition, this model contains Memorix filler. This 26 cm high mattress can withstand a load of 160 kg, has a medium firmness and provides point support for the spine thanks to a combination of fillers.

• Model Dream Memo SS differs from the previous spring block Smart Spring, thanks to which accurate zoning is possible, achieved due to the variability of the height of the spring in the uncompressed state. In addition, the block has transition stiffness zones. The presence of this block significantly improves the support of the spinal column. The model can withstand a load of 150 kg. The Dream Max SS model differs from the Dream Memo SS in its filling. Instead of Memorix, natural latex is used here.

• The Seasom series is popular for its natural latex and varying degrees of hardness on each side. The Season Max SSH model features a reinforced Smart Spring block. One surface is stiffer due to a denser coir layer of 3 cm.The other has an average hardness, since the latex layer is closest to the surface, and the coir layer is only 1 cm.

• In the Season Mix 4 D Matrix model, the spring block is reinforced and is characterized by maximum offset to each other according to the principle of a honeycomb. In addition, in this model, the latex coir is located on only one side, so the side without coir is softer than average. The mattress can withstand a load of 160 kg.

• The Optima series is available in various stiffness grades. There are models with a soft surface Optima Lux EVS, Optima Light EVS and there is a model with a medium hardness Optima Classic EVS. Optima Classic EVS is in demand for the best value for money. Latex coir on both sides and 416 springs per berth with an increased thickness of the coil by 1.9 cm provide this mattress with medium firmness. This model can withstand loads of 130 kg and has a service life of 10 years.

• Among the series with an independent spring block, the Comfort series should be noted. with various degrees of rigidity, models of which can withstand a load of 150 kg, do not require turning and have several layers of various fillers in their composition.

Models for babies are created taking into account their anatomical features. The natural materials that make up the products are hypoallergenic. Mattresses of various sizes and degrees of firmness are not subject to deformation and perfectly support the spine. A wide range of mattresses for children covers all age categories: from newborns to adolescents:

• For babies up to 3 years old, a mattress is suitable Kids health with a side height of 9 cm and an average degree of rigidity, withstanding a load of up to 50 kg. It contains Hollcon hypoallergenic filler, which does not absorb moisture and odors, thanks to which the cleanliness and freshness of the sleeping place will be guaranteed.
• Kids Smart model with independent spring block 4 D Smart has the same rigidity on both sides, provided by a 2 cm coconut coir. Suitable for children from 3 to 16 years old. This model can withstand a load of 100 kg and has a side height of 17 cm.

• Kids Classic model ideal for newborns, as it contributes to the correct formation of the spine. Coconut coir with an antibacterial effect, 6 cm thick and impregnated with latex, excellent air permeability.
• The model stands out from double-sided mattresses for children under 3 years old Kids Double. There is a 3 cm thick coconut coir on one side, and natural latex on the other. While the child is very small, it is better to use the side with the coir, and for an older baby, a latex surface is suitable.

• For children from 1 year old, the model is suitable Kids Soft with Ormafoam filler. This model perfectly supports the child's spine, while relieving muscle tension.In addition to the rectangular model, there is an oval-shaped mattress Oval Kids Soft and even a round Round Kids Soft.
• For children from 3 to 12 years old, the company has developed a model Kids Comfort with EVS spring block and various side stiffness levels. The surface with coconut coir is more suitable for toddlers up to six years old, while for older children it is better to use the Ormafoam side.

In order for the purchased mattress to serve as long as possible, the Ormatek company produces mattress toppers and covers with different properties.

Mattress toppers and covers from the company will help not only preserve the appearance of the mattress, but also protect it from moisture and dust using special impregnations. Waterproof coating The membrane is applied to the wrong side of the fabric, and the top of the cover has a cotton base. In the Dry Big model, the top is made of terry cloth and the side is made of satin. The cover is attached to the mattress with an elastic band passing along the bottom of the board. This model is suitable for mattresses with a board height of 30-42 cm. And in the Dry Light model, the top consists of Tencel fabric, and the sides are made of cotton fabric.

In the Ocean Dry Max model, moisture-resistant fabric is located not only on the main surface, but also on the sides of the cover. Verda Veil Light and Verda Veil are specially designed for mattresses with high sides. The basis of the cover is a knitted wear-resistant fabric with a light massage effect.

For thin mattresses and toppers, the company has developed many mattress toppers with different effects. For a secure fit, they are equipped with four elastic bands. The Lux Hard mattress topper increases the rigidity of the sleeping area, and the Max mattress topper softens the mattress rigidity due to natural latex. And in the Perina mattress topper, Senso Touch material is used as a softener, which not only softens the sleeping place, but also has a memory effect.

The company produces a huge variety of models, and in order to choose the best option you need to adhere to some rules:

• If you like spring mattresses better, then it is worth giving preference to products with an independent unit. Such models support the spine well, do not have a hammock effect and are suitable for married couples with a significant difference in weight. The more springs per 1 sq. meter, the more pronounced the orthopedic effect.
• When choosing, it is worth considering body weight... For people of dense build, products with a hard surface are suitable. And for people of a fragile physique, mattresses with a soft surface are suitable. For married couples with a significant difference in weight, it is worth purchasing two mattresses with the most comfortable surfaces for each and combining them into one cover or ordering a mattress where each half will have its own firmness.
• For young people under 25 and children mattresses with a hard surface are more suitable. This is due to the long-term formation of the spinal column.
• For older people less rigid models are more suitable.
• The best option for most people is a double-sided version with different degrees of rigidity of the sides. Such a mattress is suitable not only for healthy people, but also for people with spinal diseases. The degree of firmness of the mattress in case of spinal problems is determined by the attending physician, and specialists Ormatek company will help you choose the most suitable option.

Most of the buyers who purchased the company's orthopedic mattresses Ormatek were satisfied with their purchase. Almost all buyers note the absence of back pain and excellent well-being in the morning. Many people note that the company's mattresses Ormatek perfectly sized to fit any bed. Most agree that the purchase of an additional cover saved the mattress from all sorts of misunderstandings: spilled tea, leaked felt-tip pen and other troubles.Almost all buyers note that the mattress from this company, after long-term use, not only has a presentable appearance, but also has not lost its functionality.

How to choose an Ormatek mattress, see the next video.