Hot smoked smokehouse: drawings and dimensions

To taste the aromatic smoked meats, you don't have to buy them in the store. Today, homemade smokehouses are becoming more and more popular, which are quite easy to make from improvised means. In this article, we will talk about the types of such structures and how to make them.

A hot-smoked smokehouse is a construction in which products are prepared by fumigating with a large amount of smoke. Smoking is one of the most common ways to heat food, during which it acquires a specific flavor and a longer shelf life.

Smoking is carried out at a temperature of 60 degrees and above and is optimal for cooking products with low fat content. This process is fast enough and looks like smoldering sawdust or chips with products suspended from above.

Undoubtedly, the advantages of this design are much more than the disadvantages. Let's analyze them point by point.

Advantages:

• the simplicity of the design allows you to make it at home from scrap materials and in a short time;
• the smokehouse can be installed anywhere, which makes it easier to comply with fire safety measures;
• mobile smokehouses can be taken with you for going out into nature;
• smoking brings food to readiness quite quickly and does not require additional processing of food.

The owners of such structures rarely find disadvantages in operation. The only thing that can be distinguished in comparison with a cold smoked smokehouse is a greater number of carcinogens during cooking and a shorter shelf life of cooked products.

If the smokehouse is made of thin metal, then its service life will be short. On the other hand, you can use the design for a couple of seasons, and then make a new one from scrap materials. It certainly won't hit the pocket.

In order to make a high-quality smokehouse at home with your own hands, you need to have a good idea of ​​how it works and how it works. Perhaps the main requirement is the tightness of the structure. The lid must be made movable so that it can be easily removed and put on, and smoke practically does not leave the structure during cooking.

Let's list the main elements of a homemade smokehouse.

• Regardless of which container is chosen for the base of the smoker, it will need a stand or legs for stability.

• To secure the food inside, you need a grid or hooks for hanging (for fish or meat).
• A special tray must be placed under the grate, onto which the fat must drain. Otherwise, it will drip directly onto the wood and burn, and this can adversely affect the quality of the products.
• To maintain the required temperature regime, a thermometer is required. Also, during installation, it is necessary to ensure that the smoke envelops the products evenly from all sides.

A schematic diagram of the simplest smokehouse is shown below.

Before smoking for the first time, you should read important information about choosing products and preparing them for smoking.

• Do not forget that the meat has a rather soft texture. To prevent it from falling apart during the cooking process, each piece should be tied with twine or a special net should be used. We see a similar grid when buying smoked meat or fish.
• To make it easier for yourself to clean the tray, you can cover it with foil before cooking. So fat will not accumulate on it and burn. And the foil, in turn, will not interfere with the smoking process at all and will not affect the taste of the products, since it perfectly transmits heat. After completion of the work, the foil is simply removed and discarded. The pallet remains practically clean.
• To prepare fish for smoking, it is most often rubbed with coarse salt and spices. Fatty fish are wrapped in parchment and placed in a strong brine for a couple of hours.

• The dorsal part of fatty fish (balyk) is also rubbed with coarse salt, wrapped in gauze, then soaked in water to get rid of excess salt. And only after that you can start the smoking process.
• For smoking, it is worth purchasing exclusively fresh fish and preparing it yourself. There are several signs, having noticed which, it is better to refrain from buying fish: sunken eyes, gray gills, swollen belly, too soft meat on the back. If, when you press on the body of the fish, a dent remains there, this indicates its staleness and such a product will not turn out to be tasty enough, no matter how professionally it is smoked.
• If you want a good result, be sure to take into account all the necessary factors. These are the quality and freshness of the product, the composition of the marinade and the time of pickling, the quality and origin of sawdust for ignition.

To get the most juicy and tasty meat without any plaque, it is worth wrapping it in wet gauze before cooking. At the end of smoking, the gauze is simply removed, and the meat is clean and juicy.

There are several more universal rules that will help a novice smoked meat lover.

• The marinating time of the product is inversely proportional to the cooking time. This means that the longer the meat has been in the marinade, the faster it will reach full readiness.
• Food will cook even faster if it is not marinated in the refrigerator, but in a room at room temperature.

• Slivers of fruit trees added to the main fuel will give the food a special pleasant aroma.
• The service life of a smokehouse directly depends on the thickness of its walls. It is logical that a device with walls of 2 mm and higher will last much longer than the same one, but with a thickness of 1 mm.
• Subject to all safety standards, smoking in a city apartment may not be inferior in quality to smoking outdoors. In the first case, it is obligatory to output the chimney through the window.
• To prevent the appearance of bitterness in the meat, you need to open the chamber from time to time and release excess smoke. This applies to any type of smoking and any construction of a smokehouse.

For some reason, many gourmets associate only fish and meat with smoking. And in vain, because you can smoke a huge amount of products. For example, vegetables, fruits, mushrooms, nuts and more. The well-known and beloved prunes are just smoked-dried plums. You can also smoke potatoes, onions, carrots and beets. Combining them with meat and delicious dressing, you can prepare an unusual and delicious salad. Having made a mobile version of the smokehouse, you can cook mushrooms right in nature.

Hot smoking can be done independently in two ways: using electrical appliances or structures located over the fire.

In the first option, you only need to lay the fuel in the form of sawdust or chips, set the desired mode.

In the second version, the cooking process is more complicated. A wood-fired smokehouse for a summer residence can be purchased ready-made or made from any metal container.

We have already talked about the features of a home-made smokehouse, now it is worth dwelling in more detail on the electric version.It will definitely be of interest to smoked meat lovers who want to smoke their favorite products right in the apartment.

The advantages of an electric smokehouse:

• The ability to quickly smoke the necessary products within the apartment.
• There is no need to make a fire, you just need to plug the device into an outlet, having previously filled in fuel and food.
• The compact design fits into any kitchen cabinet.

• In an electric smokehouse, food is cooked quickly enough. Due to the fact that the lid completely adheres to the smoking chamber, all the heat remains inside and the whole process can be kept within 30-40 minutes.
• Most models are equipped with a smoke generator and a water seal.
• The temperature can be easily controlled manually, which protects against sudden changes.
• Affordability.

As you can see, this is ideal for city dwellers. The principle of operation of such a smokehouse is similar to other types - tightness, heat source, drip tray, grill / hooks for food.

There is also such a type as automatic smokehouses. They also use electricity as a source of heat, but they differ in large volumes of loaded products (up to 200 kilograms) and are mainly used in restaurants and food industries. Such structures are often made built-in, since there is no need to move them.

The advantages of automatic smokehouses include ease of use, because such designs do not require continuous monitoring during cooking or any special skills. One has only to choose the mode, and the stationary smokehouse will prepare the desired dish itself in a very short time. The only drawback is the high price of models for household use.

Many commercial models are equipped with a water seal. When deciding on a model, it is important to understand the purpose of this part.

The odor trap is a horizontal U-shaped piece made of a metal profile. Usually it is placed with the open part upwards and does not have any partitions. The shutter itself can be welded on the outside (more often) or inside the tank. Its placement outside is considered optimal. This allows you to refill less frequently because it does not evaporate as quickly.

The lid of the smoker should fit into the groove of the shutter. Water prevents air from entering the structure. This is very important, because otherwise the sawdust can flare up very quickly. The odor trap ensures that smoke is removed only through the chimney, which is an important and convenient feature when using the smokehouse within the apartment. In addition, this part provides an additional stiffening rib, thereby reducing the risk of deformation of the chamber under the influence of high temperatures.

Now it is worth examining in detail the role of the thermometer during smoking. Indeed, the cooking time of products directly depends on the degree of incandescence of the air inside the smokehouse. It is also known that each cooking step requires a different temperature level.

For example, when cooking fish for the first 20 minutes, it must be kept at a temperature of 35-40 degrees, then kept at a temperature of 90 degrees for another half hour. And at the last stage of smoking, the temperature rises to 130 degrees. Naturally, it is impossible to control the process without a thermometer, because even a slight deviation from the temperature regime, most likely, will not have the best effect on the quality of the finished product.

In addition, simply by looking at or probing the meat, it is quite difficult to determine the degree of its readiness. And with a special thermometer, you can measure the temperature inside the piece. Beef is considered fully cooked at 75 degrees, lamb and poultry at 85 and 90 degrees, respectively.

There are special thermometers with a body of 30 centimeters for working with meat and fish. When installing it on a smokehouse, you must make sure that it is insulated from the metal. For insulation, you can use a regular wine stopper.

The range of the thermometer for the smokehouse should be up to 200 degrees. Having the necessary knowledge and skills, you can display the indicators on a separate electronic display. But often amateurs do not do this, and purchased models already have such bonuses.

Experienced smokers often purchase a special thermometer that has a long pin for immersion in meat, about 15 centimeters long and a range of up to 400 degrees.

It is also recommended to buy a pair of thermometers: the first one to be installed on the lid of the smokehouse, and the second one to control the readiness of the meat during the smoking process.

Sometimes a thermostat is placed in smokehouses. This is a sensor with which you can adjust the heating power.

For the equipment of the simplest smokehouse, even a special tank is not required. All you need is a gas stove, an extractor hood above it, a steel plate or a can of canned food.

The procedure is very simple: products are hung under the hood, and a container for fat is placed under them. Next, a small amount of wood chips are taken in a metal dish and placed on the fire until a haze appears. Then you need to turn down the heat and make sure that the smoke goes into the hood. Actually, this is the whole process. True, in this way it is difficult to accumulate a lot of products.

A smokehouse made from an old refrigerator can be quite practical. Making it is quite simple: you need to get rid of the compressor, freezer and all the inner lining made of plastic. As a result, only a metal case should remain, in which the smoking chamber and chimney are mounted.

An approximate diagram of a smokehouse from a refrigerator body looks like this:

Fuel is placed at the site of the vegetable compartment and heated using an electric stove. Air access is provided through the pipeline.

This design has disadvantages that can affect the choice.

• Energy consumption. In order to warm up the chips strongly enough, you need a powerful electric stove. Refrigerators are made of steel with low thermal conductivity.
• In such a design, it is rather difficult to regulate the amount of heat and maintain an optimal temperature.

Another option for using household appliances is to equip a smokehouse from an old washing machine. In this case, the tank will protrude into the smoking chamber. Carrying out preparatory work, you need to expand the hole from under the motor shaft (smoke will come out of it) and equip the drain hole so that fat flows through it.

A portable compact smokehouse is very useful for outdoor picnics. A detailed diagram for equipment of this design is shown in the figure below. It can be positioned over any smoke source. You can also dig up a fireplace with a chimney, it does not take much time. This design can be used for both cold and hot smoking.

A simple diagram for equipping a smokehouse over a barbecue.

Do not be afraid that the smoke from the kebab is involved in the smoking of other products. This will not only not spoil them, but also give them a special piquancy. Many lovers of smoked fish and vegetables prefer to cook them this way.

Often, stationary structures combine a brazier with a smokehouse.

Their main feature is the use of free space under the barbecue and, in fact, the lack of mobility. Working with such a smokehouse, you don't have to worry about uniform heating, and you can put almost any container in the smoking chamber.

Having decided to acquire such a stove, you should think about the material for its manufacture. And here is a very important piece of advice: you definitely shouldn't make the whole complex with brick. It's not even about the high cost, but about the porosity of the brick. Smoke from various products and moisture accumulate inside the masonry and over time the brick will begin to rot. As a result, after just a couple of seasons, the smokehouse can begin to emit a strong unpleasant smell.

Therefore, for such structures, the best option would be to equip a smoking chamber made of iron. And brick cladding can be done already as a decor. This option has another plus: the smoking chamber welded from metal can be moved if necessary.

Theoretically, you can build a smokehouse from any improvised household items: an old safe, a large saucepan, a bucket or a barbecue case. Also, having a few pieces of plywood and a couple of logs of dry wood, you can equip a trial smokehouse in just a couple of hours. And already based on the results of the first smoking, one can draw conclusions about how practical and interesting the equipment of a real durable smokehouse will be.

The design of the future smokehouse must begin with a clear definition of the goals of its operation. That is, knowing how many products will be smoked and how often, you can calculate the approximate dimensions of the structure.

For example, an average chicken carcass is 30x20x20 cm.In order for the smoke to pass freely, the distance between the products placed inside should be about 6-7 cm.Calculating the vertical dimensions of the smokehouse, it is necessary to take into account the distance from the fuel to the pallet, from the pallet to the carcasses and from carcasses to lids.

Similar calculations need to be made for fish, vegetables and any other food that you plan to cook. If in doubt, it is better to resort to the most common models - these are small rectangular vertical structures.

Based on the diagram below, you can estimate the dimensions of the finished smokehouse, taking into account all the details that it should include:

Another important factor to consider at the design stage is location. The dimensions of the structure directly depend on where it will be applied.

If the use of a smokehouse is provided within a private plot and there are no plans to use it at outdoor picnics, you can choose a volumetric design with a large weight. The standard dimensions of purchased smokehouses for a summer residence are approximately 50x30x30 cm, and the wall thickness is 2 mm.

In a design with such dimensions, it is convenient to cook both large and small fish.

When choosing a smokehouse for cooking within an apartment, it is important to pay attention to the dimensions of the hob. The parameters of a conventional stove are approximately 50x60 cm, hence it follows that a smoker of 45x25x25 cm will be optimal.It will be conveniently placed on the stove, which will facilitate the process and improve the quality of the product.

For a mobile smokehouse, the optimal dimensions are 45x25x25 cm with a wall thickness of 1.5 mm. These parameters will allow you to serve for quite a long time without adding extra mass. For a portable smokehouse, it is advisable to purchase a stand so that every time in a new area you do not waste time on installation. The stand can be included in the package, but it is not difficult to make it yourself.

If you just want to try to smoke food sometimes, for example, a couple of times a year, then you can safely take the economy version with 1 mm walls. The service life of such a smokehouse with rare use and high-quality care can be quite long. But for regular smoking, this option is not suitable.

To improve the quality, you can also install a large fan next to the heat source. This will increase the amount of hot smoke during smoking. With it, products reach readiness faster and are more abundantly saturated with a smoky aroma.

In this section, we will look at the most popular models of hot smoked smokehouses (cheap and not so) and highlight their main advantages and disadvantages. Based on this information, you can finally decide whether to buy a ready-made structure or still try to build it yourself.

This smoker has a quality heat resistant coating that does not flake off the body when heated. The design is powered by a network (220V) and includes a light indicator. It also provides the ability to adjust the power.

The smokehouse has a removable tubular electric heater, which makes it easy to remove it before lighting a fire. The rack has three levels at once - you can cook many types of food at the same time.

Advantages:

• relatively low price (up to 4000 rubles);
• heat-resistant housing and lid;
• the wire is long enough not to resort to using an extension cord;
• three levels of removable grilles;
• compactness - the dimensions of the smokehouse are only 40 by 50 centimeters;

• the volume of the used internal space - 20 liters;
• the ability to operate at the stake;
• the weight is quite small - 7 kg;
• the ability to adjust the power of smoke;
• rather economical power consumption (800 W);
• the set includes a nice bonus - a recipe book. For beginners, this will come in handy.

Disadvantages:

• with regular use, the paint can peel off;
• there is no hose to eliminate excess gas.

This model looks quite standard.

This smokehouse has a horizontal loading and is perfect for placement, for example, on the balcony of a residential apartment.

The food grids are arranged in 2 tiers, underneath are a large grease tray and a tubular electric heater. It will take 40 minutes to fully cook 1 kg of fish in this construction. The lid is equipped with a handle with a wooden handle, which you can safely grasp without fear of scalding.

Advantages:

• one load places about 2 kg of products;
• the structure is equipped with stable metal legs;
• the handles are placed in this way, but the smoker can be carried even in a heated state;
• compactness - dimensions are 25 by 50 cm;
• weight is only 5.5 kg;
• you can vary the arrangement of the grates inside the smokehouse, for example, make one tier in the center or two above and below;
• high power (1100 W) guarantees fast cooking of any food.

Disadvantages:

• not everyone can afford such a smokehouse: the average cost is about 12,000 rubles;
• the body quickly becomes covered with a layer of fat, it is quite difficult to wash it;
• since the outlet for the heating element is located in the lid, there is a possibility of smoke entering the room;
• due to the specific legs, the smoker can slide when standing on a smooth surface.

In the rating of home smokers, this model can be called the best, since it is equipped with a water seal. He, in turn, allows the smoking process in the apartment without the use of fire. An ordinary kitchen stove serves as a heater.

The set includes a cover that fits into special grooves. Water can be poured along its perimeter to seal the structure and prevent smoke from entering the room. There is also a hose for exhausting smoke out the window.

Advantages:

• the body is made of steel with a thickness of 2 mm grade 430, which means that it is completely safe for cooking any food;
• compactness - dimensions of 50x30x30 cm are provided specifically for placing the smokehouse on a kitchen stove;
• a water seal protects against smoke seepage from the smokehouse;
• the presence of two steel gratings that can be placed at the same time;
• for the convenience of removing the gratings, special handles are made;
• the set includes a bag with alder.

Disadvantages:

• no stand for charcoal cooking;
• the inability to carry the smokehouse during cooking, as its handles get very hot during the process;
• not the most affordable cost - 7,000 rubles;
• not suitable for smoking small products, berries or mushrooms, because the internal grates have sparse rods and products will simply fall out of there.

But for carrying such a smokehouse, a beautiful and convenient case is provided:

This model is ideal for outdoor picnics with a large company. It is equipped with foldable parts and a bag-cover, which makes it very convenient to transport.

Advantages:

• affordable price - 4300 rubles;
• low weight of 6 kg makes the design easy to carry even by hand;
• durable waterproof cover included;
• compactness - dimensions of only 31x7.5x49 cm;
• all metal parts are made of stainless steel;
• such a smokehouse can be used as a brazier;
• the height of the assembled structure is only 20 cm;
• one bookmark can hold up to 3 kg of product.

Disadvantages:

• the handle on the lid heats up quickly;
• the walls are only 0.8 mm thick, which cannot guarantee a long service life with regular use;
• used only for hot smoking.

But with rare forays into nature, this option will justify all hopes and fulfill its main tasks.

This smoker is made for big lovers of smoked bacon, cheese and vegetables. The design is suitable for hot and cold smoking, includes a smoke generator and a compressor. The amount of smoke in this design can be adjusted by changing the fan power.

Advantages:

• the body of the smokehouse is covered with polymer;
• cost - only 3000 rubles;
• smoking chamber for 32 liters;
• low weight of the main structure - 3.7 kg, plus a smoke generator - 1.2 kg;
• food can be arranged in two levels.

Disadvantages:

• the plastic case and the regulator can hardly be called reliable and durable;
• insufficient body rigidity due to steel thickness of 0.8 mm;
• no stand included.

Such a smokehouse does not look like a standard home-made construction at all.

Here are the most purchased models of domestic production. If you wish, of course, you can try to order something similar in China or other countries, but this has its own inconveniences. Before the parcel arrives, the unit cannot be properly examined and all parts must be checked. When choosing, you can think about the fact that domestic manufacturers are well aware of the tastes and preferences of their people, which means they can bring all these ideas to life.

Big limb lovers often make their own homemade smokehouse. It is quite simple to make it yourself, the more you can choose the most different materials: brick, steel sheets, a bucket or an ordinary household barrel.

You will need 2 sheets of metal with a thickness of about 2 mm, measuring instruments, a welding machine, a grinder. You can make absolutely any parameters. It is much more important to provide for the impermeability of the smoking container.

First you need to cut the sheet into 4 equal parts. Then they need to be welded at right angles and all the seams should be welded properly so that the structure turns out to be airtight. The bottom is then welded to this geometric structure.

After that, the lid is made. It also requires 4 steel sheets. But the size of the lid should be slightly larger than the previous box, so that it can be easily put on the body of the smokehouse. After checking the dimensions, the lid is welded to the main box.

The final step is to make the carrying handles and two levels with rods. On the first (bottom) there will be a pan on which the fat should drain. The second will house hooks for products.

The smokehouse is ready! An electric stove will serve as a heat generator here, but if you need to increase the smoking temperature, you can make a fire.

The smokebox is sometimes placed inside the barrel. It takes up about a third of the internal space, while the main space is reserved for the smoking chamber. These two compartments are separated by a sheet of metal about 3 mm thick, welded to the walls. The same sheet will serve as the bottom of the structure.

This diagram describes in detail the mechanism for assembling a homemade smokehouse from a barrel:

To provide air access to the firebox, the bottom of the barrel needs to be drilled and several holes made. Ash will come out through the same holes. The firebox door is cut at the bottom of the barrel. Typically, its dimensions vary about 20 cm by 30 cm. You also need to provide a place from where the chimney will come out.

Further actions are similar to the previous option: the device of the pallet, grate, lid and hooks for products. To always control the smoking temperature, a mechanical thermometer can be installed on the side of the barrel. This will greatly help those who are just starting to use the smokehouse and do not have enough experience. If you do not have a thermometer, you can check the temperature by spraying water droplets: at the correct temperature, it will not evaporate.

To make a home smokehouse from a bucket, you need to cover its bottom with sawdust, and place a grate above. In the widest part of the bucket, you need to drill holes and insert rods with hooks for food into them or equip a grate. The process is shown in more detail in the drawing:

Holes are also needed in the lid so that smoke can escape through them. Over medium heat, simple dishes in this design can be cooked very quickly: from 30 to 60 minutes.

Do not forget that there is no need to maintain a strong fire. Smoldering sawdust is required for cooking. When the fuel starts to smolder, it's time to place the food inside the smoker and close the lid.

According to the principle of operation, a brick smokehouse practically does not differ from the rest. Instead of a regular lid, a wooden door is often installed in it. Also, brick construction requires a solid foundation.

The size of a brick smokehouse will depend on the volume of food to be cooked. In any case, the chamber itself should be at least 2 times larger than the firebox. The soil around the brick smokehouse must be properly compacted.

An air duct is also needed, the junction of which is better protected with some kind of plate. There is an option for arranging drainage over the air duct. To preserve the tightness, you need to lay burlap under the lid.

Scheme for building a brick smokehouse:

Even from a gas cylinder, making a home smokehouse is much easier than it seems.

The first and most important step is to release all the gas contained in the cylinder. To do this, you can take it out to a deserted place and disconnect the valve. To make sure that there is no gas left inside, it is enough to immerse the valve in water: in the absence of bubbles, the cylinder can be considered safe. Next, the container is washed from the inside with plain water.

Now you can start making a smokehouse from a cylinder. To do this, the walls for the equipment of the door are sawn (it should be quite large), the hinges are welded on and half of the bottom is sawn off. The source of heat in such a smokehouse is often an electric stove, above which pallets with products in several levels are placed.

A detailed diagram of the equipment of a smokehouse in a gas cylinder.

Operating tips.

• Alder and juniper are best for fuel. They produce the perfect smoke for smoking. Alternative options are oak, cherry or pear. If the choice is limited, the preference should always be given to hard rocks.
• It is not recommended to heat with coniferous wood, because it contains a large amount of resin (it is not always useful).
• Before laying, the wood must be chopped, otherwise they will not produce the necessary smoke and heat.The resulting chips (sawdust) must be evenly distributed and the combustion will be uniform throughout the entire firebox.

• The temperature in the smoking chamber should not exceed 100 degrees. If you make sure you have a mechanical thermometer in advance, it's easy to check.
• There is also a smokehouse design in the form of two containers - one is placed in the other. But the inconvenience lies in the difficulty of cleaning the bottom of the burnt fat after cooking.
• To obtain fragrant smoke, cover the smoker with smoldering sawdust with a lid and close all openings in it.
• To maintain a uniform smoking temperature, it is necessary to constantly add sawdust to the pallet.
• If birch firewood is used as fuel, the bark must be removed from it before starting the firebox. Otherwise, food may taste bitter during cooking.

• For lovers of fatty fish, it is better to use the cold smoking method, since the hot one is designed only for low-fat products. The whole process can take 5-6 days, but the result will correspond to the time spent.
• When the material for self-made smokehouse is chosen, it is worth making sure that it is not toxic and does not emit an odor when the temperature rises.
• A homemade smokehouse can be supplemented with a filter. To do this, pull the burlap over a regular wire frame and place it under the grate.
• For an even more sophisticated aroma, you can add chips of fruit trees or bushes to the main fuel. Black and red currants, cherries, pears are well suited.
• To make it easier to remove and wash the grill, you can weld several corners inside the smokehouse, on which it will be attached. An alternative option is a lattice with legs.

• When choosing a wood for kindling, you need to immediately exclude conifers: the food will have a bitter taste and tarry.
• To prevent the chips from flaring up at the slightest breath of wind, they should be slightly damp. Sawdust and wood chips can be replaced with brushwood (which, by the way, smolders longer), but it can also cause bitterness in the taste of finished products.
• To maximize the shelf life of a smoked product, you need to place it in a vacuum package or in a freezer. But it should be borne in mind that after defrosting, the taste will no longer be the same.
• You should never chill your smokehouse. This can cause the destruction process to begin.
• To check the degree of doneness of the meat, you need to cut it. If it has already smoked enough, then the color will be uniform on the cut. If, in the middle of the piece, the meat stands out with a different shade, this means that it needs to be placed in the smokehouse for some more time.

For information on what size a hot-smoked smokehouse can be, see the next video.