Characteristics and features of brick M125

Brick M125 is often used during construction work. With its help, not only walls are erected, but also partitions, stairs, fences. The basis for the production of the product is clay, it is fired under the influence of high temperatures. Depending on how the production process goes, certain characteristics are assigned to products.

Bricks have their own strength designation. It consists of the letter "M" and an additional number indicating the size of the permissible load per square centimeter. All designations are spelled out in GOST.

It is mandatory to check each batch, for this test samples are tested for bending and compression. The marking can have numerical values ​​from 75 to 300.

Brick М125 is used in construction works most often... It gained its popularity due to qualities such as reliability and durability. The scope of use is wide enough.

The product is in the middle price category and depends primarily on its type. However, before opting for bricks of a certain brand, you should carefully read their characteristics and properties.

М125 is a product made of clay with the addition of water and plasticizers. The product is environmentally friendly and can be used in the construction of any elements. The shade range can be varied, the influence is exerted by various types of clay used in production, and the presence of impurities that affect the properties of the brick.

So what does the M125 marking mean? The presence of these numbers indicates that such a brick can withstand a load of 125 kilograms per square centimeter... Subject to this load, the product does not deform and does not begin to collapse. Since the density is high enough brick of the M125 brand is considered to be universal, it copes well with adverse environmental influences, is sturdy and durable.

Brick M125 can be made using two different technologies. This is plastic molding or semi-dry pressing. However, both methods involve post-firing at high temperatures. This product can be divided into 4 types. In addition to solid and hollow bricks, there are also ordinary and facing bricks. Which one should be chosen depends on the type of work that will be performed.

Hollow brick has a textured surface, which allows it to be used for cladding buildings both inside and outside the premises. Walls trimmed with such material look very aesthetically pleasing.

Among the technical characteristics, one can note the dimensions of 250x120x65 millimeters, weight from 2.2 to 2.5 kilograms, strength equal to 1.4-1.6 MPa. If the product has a uniform color over the entire surface, this indicates that we have a quality product in front of us.

As for cladding with such a brick, you should use products from the same batch, this can guarantee the most accurate appearance.

Solid brick M125 also has voids, but their number is minimal and does not exceed 13%. This product is used in the construction of houses, utility and storage facilities, buildings for various purposes..

This model tolerates adverse weather conditions and negative environmental impacts, therefore it can be used in any part of Russia. The surface is rough, therefore, it requires the application of plaster before tiling.

Solid brick is used in the construction of load-bearing structures. He is also called ordinary, construction and ordinary.

According to the technical characteristics, the product has the same dimensions as the hollow brick, bending and compressive strength is also equivalent. It should be noted more serious weight of approximately 3.5 kilograms and frost resistance from F50 to F75... The thermal insulation properties of the material are low, therefore, when using it for the construction of walls, additional insulation is required.

Experts name a number of advantages that distinguish M125 brick favorably. First of all, it is reliability and durability. Walls built using this material will last for many years without collapsing and retaining their characteristics. At the same time, the appearance is neat and aesthetic. Since the product has the ability to breathe, mold and mildew will not disturb the owners of the premises.

The brick can be single, one and a half or double. Different types are used for different directions of work, for example, when erecting walls, builders take solid brick, but when finishing work - already front or hollow... This affects the appearance of the surface. In order to save money, you can use silicate stone for decoration; it goes well with red brick.

Another undeniable advantage is cost. It is average, however, it may vary depending on the supplier, region of delivery and type of model.

So that the result of the work does not disappoint the consumer, experts recommend using a number of tips. Compliance with them will save you from possible mistakes. First of all, when working with brick of the M125 brand, it must be borne in mind that the wall thickness must be at least 2.5 products. This has a direct effect on heat dissipation. If the stone is of good quality, its core will have a brighter color.

For information on how to properly lay brick M125, see the next video.